South Sudan · Juba
Smart Hands in Juba
Smart hands is technical work that needs diagnostic judgement and configuration knowledge, carried out at the rack by Reboot Monkey field engineers. Reboot Monkey provides on-site IT support in Juba data centers on the customer's instruction, inside third-party facilities, for businesses that need a technician who can diagnose and configure, not only follow steps.
In Smart Hands
- Smart Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- ITADon request
Smart Hands
8
services detailed for Juba
1
agreement for every city
Request Smart Hands in Juba
Send Reboot Monkey the task and the equipment concerned, and receive a quote for the job.
In depth
Smart Hands: 6 sections, open any to read more.
Smart Hands in Juba
A deployment in Juba raises a practical question before any ticket is raised: does the job need someone who follows an instruction exactly, or someone who can diagnose a fault and change a configuration? Remote hands covers the first and smart hands the second. Reboot Monkey supplies both through field engineers who are dispatched to the customer's facility in Juba.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside third-party data centers. It is not a hosting company and does not own a data center, so smart hands work is carried out on the customer's own equipment or on hardware Reboot Monkey has supplied.
Reboot Monkey also sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.
Datacenter Facilities in Juba
Data centres in Juba, ordered by the number of networks present:
- Trinity Technologies DC Juba (Trinity Technologies Ltd), Block A111 Plot No 5, Hai Malakal, 00211 Juba
Our Smart Hands Services
Smart hands is the service line for work that goes beyond instructed physical tasks: the engineer applies diagnostic judgement and configuration knowledge to the equipment in the rack. Reboot Monkey works to these definitions for the other service lines. Each is scoped and quoted against the customer's instruction before an engineer is dispatched.
Where a job involves cabling, Reboot Monkey engineers install and patch the cabling in the customer's rack, and a fibre inspection scope and cleaning kit are available on request.
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey
Work starts with the customer's instruction, which identifies the task and the equipment concerned. Reboot Monkey dispatches an engineer to the customer's facility in Juba, and the engineer carries out the task at the rack. Prices are quoted on request and depend on the customer and the size of the job.
A second, briefed Reboot Monkey engineer is named as backup for every customer site, alongside the engineer assigned to the work.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Reboot Monkey is a vendor-neutral operator. A buyer who needs rack space, IP transit or leased IP addresses as well as engineering work can source them from the same supplier. A customer with retired equipment can request decommissioning or ITAD from the same operator, and a customer moving equipment between racks, rooms or facilities can request server migration. Customers who want their servers and network equipment watched can add hardware monitoring, run by the Reboot Monkey NOC, to the engineering work.
How Reboot Monkey Works
These terms apply in every facility in Juba where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does smart hands cover in Juba?
Smart hands in Juba covers technical work that needs diagnostic judgement and configuration knowledge, carried out by a Reboot Monkey engineer at the customer's rack. Adjacent work is handled by the other Reboot Monkey service lines: remote hands, rack and stack, server migration, data center decommissioning, IT asset disposition and hardware monitoring.
Do you provide on-site IT support in Juba data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility in Juba to carry out the work on site. Diagnostic and configuration tasks fall under smart hands, physical tasks on the customer's instruction fall under remote hands, and new hardware is installed, mounted and cabled under rack and stack.
Do you work in every datacenter in Juba?
Reboot Monkey engineers work in any facility in Juba where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Juba?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with smart hands in Juba?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Request Smart Hands in Juba
Send Reboot Monkey the task and the equipment concerned, and receive a quote for the job.