Skip to content
Map of Austria: data centres as dots, the cities with a Reboot Monkey page highlighted: Vienna

Map: Natural Earth

Data Center Decommissioning

Data Center Decommissioning in Austria

Data center decommissioning in Austria is the removal and disposal of retired hardware from a customer's rack, room or facility. Reboot Monkey engineers record each item against the customer's asset list, schedule removal in advance, and log every item as it is removed.

  • 7

    of our services in Austria

Choose your city

  • Vienna's old town from the south tower of St. Stephen's: red roofs and a green copper dome above the cathedral's patterned tile roof

    Photo: Dietmar Rabich / Wikimedia Commons / “Wien, Stephansdom, Blick vom Südturm -- 2018 -- 3268” · CC BY-SA 4.0 · source

    Vienna

    • Data Center Decommissioning
    • Colocation
    • Data Center Migration
    • Rack and Stack
    • Remote Hands
    • Server Migration
    • Smart Hands
    Data Center Decommissioning Vienna

Services in Data Center Decommissioning

In depth

Data Center Decommissioning: 8 sections, open any to read more.

Data Center Decommissioning in Austria: How It Works

Data center decommissioning is the removal and disposal of retired hardware. In Austria, Reboot Monkey carries it out inside data centres that other companies own and run. Reboot Monkey does not own the buildings and is not a hosting company, so every job is planned around the site where the customer's equipment stands. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The service is the physical side of retiring equipment from a rack, a room or a facility, which is why the plan starts from the customer's asset list and the rack positions.

The sequence is deliberate. Recording comes before removal and logging happens during it, so the customer's asset list and the log of removed items describe the same equipment, item by item. The asset list is the customer's own, the serial numbers and asset tags are read from the hardware, and the rack positions are those of the customer's racks. The log gives the customer a record of the removal that can be set against the list the job started from.

Disposal is the one step with more than one route. Retired hardware can be disposed of as it is, or it can go through IT asset disposition when it carries data or may be resold. The customer states the intended route when the request is raised, so the removal window and the disposal route are agreed together. Resale or buyback is quoted case by case.

A decommissioning request moves through six steps, and each step leaves something the customer can check against its own records.

  • Scope: the customer names the equipment to be retired and the rack positions that hold it, working from the customer's asset list.
  • Recording: Reboot Monkey engineers record serial numbers, asset tags and rack positions against the customer's asset list, so each item leaving a rack matches a line on that list.
  • Scheduling: removal is scheduled with the customer in advance, including any out-of-hours or weekend windows the facility requires.
  • Removal: Reboot Monkey engineers are dispatched to the customer's facility and take out the retired hardware.
  • Logging: every item is logged as it is removed.
  • Disposal: the removed hardware is disposed of by the route the customer chooses.

Datacenter Landscape in Austria

Data centres in Austria, ordered by the number of networks present:

  • Digital Realty VIE1/2 - Vienna, Louis-Haefliger-Gasse 10, 1210 Vienna: 192 networks; carriers Arelion, Aristo Networks, Core-Backbone, EXA Infrastructure, Eranium Fabric and others
  • NTT Vienna1 Data Center (VIE1) (NTT DATA's Global Data Centers division), Computerstraße 4, 1100 Vienna: 46 networks; carriers Core-Backbone, EXA Infrastructure, Inter.link, euNetworks and next layer
  • Vienna University Computer Center (Wien) (University of Vienna), Universitaetsstrasse 7, 1010 Vienna: 27 networks; carriers Core-Backbone, euNetworks and next layer
  • DATASIX Vienna (VIE1) (DATASIX Rechenzentrumsbetriebs GmbH), Hofmuehlgasse 3-5, 1060 Vienna: 20 networks; carriers Arelion and euNetworks
  • Stadtwerke Klagenfurt (Stadtwerke Klagenfurt AG), Gabelsbergerstraße 50a, 9020 Klagenfurt am Wörthersee: 19 networks; carriers next layer
  • Kelag Klagenfurt (oja.at GmbH), Arnulfplatz 2, 9020 Klagenfurt: 18 networks
  • Techno-Z (Techno-Z Verbund GmbH), Schillerstraße 30, 5020 Salzburg: 18 networks; carriers Core-Backbone, RETN and next layer
  • Nessus NDC1, Fernkorngasse 10, 1100 Vienna: 13 networks; carriers euNetworks and next layer
  • Nessus NDC2, Karmarschgasse 23-25, 1100 Vienna: 13 networks; carriers euNetworks and next layer
  • Datencenter 3 - Innsbruck (HALLAG Kommunal GmbH), Eduard-Bodem-Gasse 2, 6020 Innsbruck: 10 networks

Data Center Decommissioning by City

City pages for data center decommissioning in Austria:

  • Vienna: https://www.rebootmonkey.com/en/austria/vienna/data-center-decommissioning/

Data Center Decommissioning in Austria: What We Deliver

Decommissioning in Austria covers servers, switches, storage arrays, and their cabling and rail kits. Cabling and rail kits are part of the scope, so the hardware leaves the rack together with what connected and mounted it. Removal and disposal are the two halves of the service: the first takes hardware out of the rack, and the second decides where it goes.

A customer closing a room or a whole site and moving part of its equipment elsewhere is covered by datacenter exit and relocation, which joins the move of the equipment that continues in service with the removal and disposal of the equipment that does not. A customer that only retires hardware, with nothing moving to a new location, sends a decommissioning request on its own.

When the customer's asset list and the racks may not match, asset inventory records the equipment by serial number, asset tag and rack position against that list, and the retirement scope can then be set from the result.

Where hardware stays in service beside the equipment being retired, remote hands covers reboots, cable checks, component swaps and visual checks on that hardware, while smart hands covers configuration and diagnostic work.

ITAD and ITAD with buyback differ in one respect: the second includes the buyback of the retired hardware. In both, resale or buyback is quoted case by case, so the outcome is settled for the job.

The related services that can join a request are these:

  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.
  • ITAD with buyback: IT asset disposition with the buyback of the retired hardware, quoted case by case.
  • Datacenter exit and relocation: the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
  • Remote hands and smart hands: physical tasks carried out on the customer's instruction, and technical work that needs diagnostic judgement and configuration knowledge.

Why Reboot Monkey for Data Center Decommissioning in Austria

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and not a datacenter owner. For a decommissioning request, this means the removal sits in the same service range as the installation and support of the hardware. A customer that already uses Reboot Monkey for any of these services has the same operator for the removal.

That range covers the stages of a hardware deployment. Rack and stack is installing, mounting and cabling new hardware. Structured cabling is installing, labelling and patching the cabling between the customer's racks and network equipment. Hardware supply and spares is the supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request. Remote hands and smart hands cover the physical and technical tasks in between. Decommissioning is the end of the same sequence: removing and disposing of retired hardware.

The network side follows the same pattern. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When retired equipment is replaced, not only removed, Reboot Monkey can also supply the new data-centre hardware, so removal and replacement can be requested from the same operator.

Disposal stays inside the same operation: IT asset disposition is processed by Reboot Monkey staff, in a partner's processing facility or on the customer's site.

IT infrastructure turnkey and run is a further arrangement. You or your investors fund the IT infrastructure, and Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. The data center itself stays with its operator. Hardware that Reboot Monkey runs under this arrangement reaches the end of its life in the same data center, where the decommissioning service applies.

How Reboot Monkey Works

These terms apply in every facility in Austria where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

Data Center Decommissioning in Other Countries

Decommissioning is not tied to one country. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a customer whose equipment is retired in more than one country, each site has its own asset list, its own rack positions and its own facility requirements, so a multi-country request is prepared per site.

For equipment retired in Australia, the request is raised through Data Center Decommissioning in Australia.

Each customer site also has a named backup: a second, briefed Reboot Monkey engineer. When a customer has several sites to retire, every one of them has a named second engineer.

A customer moving equipment to another site rather than disposing of it adds one more input, the destination, and the request is raised as a move instead of a removal alone.

Before contacting Reboot Monkey, the customer gathers four inputs for each site:

  • The asset list for the site. Serial numbers, asset tags and rack positions are recorded against it, so the list is the reference the whole job is checked against.
  • The equipment and rack positions to be cleared, which can include servers, switches, storage arrays, and their cabling and rail kits.
  • Any out-of-hours or weekend window the facility requires for removal, so that the removal can be scheduled with the customer in advance.
  • The intended route for the hardware: disposal, IT asset disposition, or ITAD with buyback quoted case by case.

Frequently Asked Questions

What does data center decommissioning cover in Austria?

Decommissioning in Austria covers the removal and disposal of retired hardware: servers, switches, storage arrays, and their cabling and rail kits. Serial numbers, asset tags and rack positions are recorded against the customer's asset list, removal is scheduled with the customer in advance, and every item is logged as it is removed.

Do you work in every datacenter in Austria?

Reboot Monkey engineers work in any facility in Austria where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Austria?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with data center decommissioning in Austria?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center decommissioning work is scheduled under the operator's rules.

Plan a Decommissioning in Austria

Send the asset list, the rack positions to be cleared and any removal window the facility requires, and Reboot Monkey will schedule the work with you.

Published:

Get a quote