Skip to content
Map of Austria: data centres as dots, the cities with a Reboot Monkey page highlighted: Vienna

Map: Natural Earth

ITAD

ITAD in Austria: IT Asset Disposition by Reboot Monkey

ITAD in Austria covers the collection and transport of retired IT hardware from the customer's site or data centre, data wiping or physical destruction of storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff carry out the work on the customer's site or in a partner's processing facility.

  • 7

    of our services in Austria

Services in ITAD

In depth

ITAD: 9 sections, open any to read more.

ITAD in Austria: How It Works

IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. For a company in Austria, the practical questions are where each of those steps takes place and who carries it out.

Reboot Monkey delivers ITAD as a physical service. Its staff process the hardware either on the customer's site or in a partner's processing facility, depending on the equipment and on what the customer needs done with the storage media. Reboot Monkey does not own data centres and is not a hosting company. It works inside facilities that other companies own and run, and ITAD is one of the services it delivers there, alongside remote hands, rack and stack and server migration.

Hardware reaches the end of its life in different ways: a refresh replaces a generation of servers, a deployment is wound down, or a room is cleared. The sequence that follows is the same in each case. The retired hardware is collected and transported for processing, and its storage media are wiped or destroyed. Equipment that can be used again is considered for resale or buyback, and both are quoted case by case, so the value of a lot is settled for each job and not fixed in advance.

For an IT director or a procurement manager, the decision usually comes down to a few points: whether storage media are wiped or destroyed, whether destruction takes place on the customer's site, and whether any of the equipment is worth selling back.

E-waste Rules in Austria

In Austria, electronic waste falls under the Elektroaltgeräteverordnung (EAG-VO) of 2005. A project that retires IT hardware in Austria therefore runs alongside that regulation, and the customer's own legal or environmental advisers remain the people who decide how it applies to a particular asset. Reboot Monkey does not give legal opinions. Its part is the physical handling of the hardware once the customer has decided what leaves the building.

That division of roles matters when a project is scoped. Reboot Monkey needs to know which hardware is being retired, where it stands, and what the customer wants done with it. The more precise the list, the more precise the work. Where a customer does not hold a reliable list, Reboot Monkey can record the equipment in the data center by serial number, asset tag and rack position, against the customer's asset list. The result is a record of what is in the racks that can be set beside the list of what is meant to be removed.

Once the list is agreed, the hardware follows one of these routes. Equipment that can be used again is considered for resale or buyback, quoted case by case. Everything else is processed for disposal by Reboot Monkey staff, in a partner's processing facility or on the customer's site. In both routes the storage media are dealt with as part of the job, by data wiping or by physical destruction, and the customer states which of the two applies to which equipment.

This keeps responsibility clear. The customer decides what is retired and how the regulation applies to it, and Reboot Monkey collects, transports and processes the hardware as instructed.

Personal Data on Retired Drives in Austria

In Austria, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679), overseen by the Austrian Data Protection Authority (Österreichische Datenschutzbehörde). A drive that leaves a server still holds whatever was written to it, so the treatment of storage media is the part of an ITAD project where the data protection question sits.

Reboot Monkey answers that question through the treatment of the media itself, and the customer chooses the method. Data wiping leaves the storage media in working condition, which suits hardware that is going to be sold or bought back. Physical destruction leaves no usable drive. On the customer's site, storage media can be destroyed physically by shredding or degaussing, and that work is carried out by Reboot Monkey staff at the location where the drives were in use.

A single project can combine methods. Drives from some systems can be destroyed on site, while other hardware is wiped and considered for buyback. The customer's instruction names the method per system, and Reboot Monkey works from that instruction.

The regulation and the authority are named here because they are the framework a retirement project in Austria sits in. Which method suits a given drive depends on what the customer needs from the hardware afterwards and on what the customer's own advisers decide. Reboot Monkey does not set that policy. It carries out the chosen method on the media and processes the remaining hardware afterwards, whether on the customer's site or in a partner's processing facility.

How Collection and Destruction Work

Collection and destruction are handled as separate steps, and the customer decides how each is done. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. Reboot Monkey engineers are dispatched to the location the customer names in Austria.

When the hardware stands in a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

The ITAD service itself consists of these parts, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site:

  • Collection of the retired hardware at the customer's site or data centre, and transport for processing.
  • Data wiping of storage media.
  • Physical destruction of storage media on the customer's site, by shredding or degaussing.
  • Resale or buyback of equipment that can be used again, quoted case by case.

IT Asset Disposition Process Flow

A request starts with the customer describing the job: where the hardware is, what it consists of, and what should happen to the storage media. From there the work follows a fixed order, and each stage has a clear owner. First, Reboot Monkey scopes the job with the customer. Prices are quoted on request and depend on the customer and the size of the job. Resale and buyback value is handled in the same way, quoted case by case once the equipment is known. Second, engineers are dispatched to the customer's site or data centre and collect the retired hardware. Third, the hardware is transported for processing. Processing takes place either on the customer's site or in a partner's processing facility, and it is carried out by Reboot Monkey staff in both cases. Fourth, the storage media are treated as instructed: data wiping, or physical destruction by shredding or degaussing on the customer's site. Fifth, equipment that can be used again is assessed for resale or buyback. The outcome is quoted for that equipment, and the customer decides whether to proceed. When the retirement belongs to a larger move, such as a data center decommissioning or a datacenter exit and relocation, the removal of the hardware and its disposal are planned together with the physical move, so that nothing is left behind in the racks.

Why Reboot Monkey for ITAD in Austria

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. ITAD belongs to the same set of services, which means the engineers who install hardware are the same organisation that retires it.

That matters most when retirement is tied to other work. Replacement hardware can be supplied through hardware supply and spares, installed through rack and stack, cabled through structured cabling, and moved between racks, rooms or facilities through server migration. The old hardware leaves through ITAD or, where the customer wants the retired equipment bought back, through ITAD with buyback. For a customer who funds new infrastructure and wants it run for them, IT infrastructure turnkey and run covers buying, installing, configuring and running it inside the data center the customer chooses, while the data center itself stays with its operator.

A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the customer has a named alternative if the first engineer is unavailable.

The practical benefit for a CTO or an IT director is a single point of contact for a project that would otherwise be split between an installation provider and a disposal provider. Procurement receives a quote for the job, and the scope is written down in the customer's terms before any hardware is touched.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in Austria.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

IT Asset Disposition (ITAD) in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a company with equipment outside Austria, that means a retirement project does not have to end at the Austrian border, and the same service model can be used at each site.

A project that covers several countries is scoped country by country. The Austrian regulation on electronic waste and the Austrian rules on personal data on retired drives apply to the Austrian part of the job. A site elsewhere is scoped against the rules of the country it is in, and the customer's advisers confirm which rules apply.

For a customer whose estate also includes Australian sites, the route into that work starts with IT Asset Disposition (ITAD) in Australia, which gives the service scope for that country.

Where a customer needs a new installation at several sites alongside the retirement, multi-site rollouts are available: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. The retired hardware at each site is then collected and processed through the ITAD service described above.

Whether the job is one rack in one data centre or a retirement spread across countries, the starting point is the same. The customer describes the hardware, the locations and the intended treatment of the storage media, and Reboot Monkey quotes the work from that description.

Frequently Asked Questions

What does IT asset disposition cover in Austria?

IT asset disposition covers collection and transport of retired hardware from the customer's site or data centre, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. In Austria, electronic waste falls under the EAG-VO of 2005, and personal data on retired drives falls under the General Data Protection Regulation.

Where does Reboot Monkey process retired hardware in Austria?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in Austria?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in Austria?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Plan the retirement of your IT hardware in Austria

Describe the hardware, the location and the intended treatment of the storage media, and Reboot Monkey will quote the work.

Published:

Get a quote