Map: Natural Earth
Remote Hands
Data Center Remote Hands in Austria
Data center remote hands in Austria: Reboot Monkey engineers are dispatched to the customer's facility to carry out physical tasks on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Reboot Monkey works inside data centres that other companies own and run.
7
of our services in Austria
Choose your city

Photo: Dietmar Rabich / Wikimedia Commons / “Wien, Stephansdom, Blick vom Südturm -- 2018 -- 3268” · CC BY-SA 4.0 · source
Vienna
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
Services in Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- ITAD
- Server Migration
- Smart Handson request
- Rack and Stackon request
In depth
Remote Hands: 8 sections, open any to read more.
Data Center Remote Hands in Austria: How It Works
Data center remote hands in Austria means that physical work inside a data center is carried out by Reboot Monkey engineers on the customer's instruction. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters.
Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. The customer decides what is to be done, and the engineer carries out that task at the rack. This suits teams that manage their servers and network equipment remotely and need a physical action in the data center only when something has to be touched.
Every visit takes place in a building that Reboot Monkey does not run. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
The boundary between services matters when a request is written. A reboot or a cable check is remote hands. Installing, mounting and cabling new hardware is rack and stack. Moving equipment between racks, rooms or facilities is server migration, and removing and disposing of retired hardware is data center decommissioning. Each is a separate service with its own scope, so the instruction should name the task rather than the outcome the customer hopes for. A remote hands request is handled in this order:
- The customer sends an instruction that names the rack, the device and the task, for example a reboot, a cable check, a component swap or a visual check.
- Reboot Monkey assigns an engineer, who is dispatched to the customer's facility.
- The engineer carries out the instructed task at the customer's rack and keeps to the scope of the instruction.
- If the task proves to need diagnostic judgement and configuration knowledge, it is treated as smart hands, a separate service, instead of being stretched under remote hands.
Datacenter Landscape in Austria
Data centres in Austria, ordered by the number of networks present:
- Digital Realty VIE1/2 - Vienna, Louis-Haefliger-Gasse 10, 1210 Vienna: 192 networks; carriers Arelion, Aristo Networks, Core-Backbone, EXA Infrastructure, Eranium Fabric and others
- NTT Vienna1 Data Center (VIE1) (NTT DATA's Global Data Centers division), Computerstraße 4, 1100 Vienna: 46 networks; carriers Core-Backbone, EXA Infrastructure, Inter.link, euNetworks and next layer
- Vienna University Computer Center (Wien) (University of Vienna), Universitaetsstrasse 7, 1010 Vienna: 27 networks; carriers Core-Backbone, euNetworks and next layer
- DATASIX Vienna (VIE1) (DATASIX Rechenzentrumsbetriebs GmbH), Hofmuehlgasse 3-5, 1060 Vienna: 20 networks; carriers Arelion and euNetworks
- Stadtwerke Klagenfurt (Stadtwerke Klagenfurt AG), Gabelsbergerstraße 50a, 9020 Klagenfurt am Wörthersee: 19 networks; carriers next layer
- Kelag Klagenfurt (oja.at GmbH), Arnulfplatz 2, 9020 Klagenfurt: 18 networks
- Techno-Z (Techno-Z Verbund GmbH), Schillerstraße 30, 5020 Salzburg: 18 networks; carriers Core-Backbone, RETN and next layer
- Nessus NDC1, Fernkorngasse 10, 1100 Vienna: 13 networks; carriers euNetworks and next layer
- Nessus NDC2, Karmarschgasse 23-25, 1100 Vienna: 13 networks; carriers euNetworks and next layer
- Datencenter 3 - Innsbruck (HALLAG Kommunal GmbH), Eduard-Bodem-Gasse 2, 6020 Innsbruck: 10 networks
Remote Hands by City
City pages for remote hands in Austria:
- Vienna: https://www.rebootmonkey.com/en/austria/vienna/remote-hands/
Data Center Remote Hands in Austria: What We Deliver
Remote hands is delivered together with the services that surround it, so a customer with equipment in an Austrian data center can place its physical work with one provider. For on-site IT support in Austria data centers, Reboot Monkey engineers work in the customer's facility at the customer's rack, from a single reboot to a larger installation programme. The services that most often sit next to remote hands are defined as follows.
When a remote hands task shows that larger work is needed, such as new hardware to mount or equipment to move, the follow-on work is scoped as its own service from the list above rather than added to the original instruction.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
- Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
- GPU and AI cluster deployment: racking, cabling and node swaps.
- Datacenter exit and relocation: the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired.
Why Reboot Monkey for Data Center Remote Hands in Austria
Reboot Monkey sells the network for the rack as well as the hands that work on it. It orders cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. A customer that needs rack space, connectivity and physical support therefore deals with one provider for all three, while the building itself stays with its operator.
The commercial side follows the same direct logic. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. IPv4 addresses can be leased alone or together with IP transit and rack space under one agreement. Data-centre hardware, servers, network equipment and spare parts are supplied by Reboot Monkey, and spares are kept in the customer's rack on request. A fibre inspection scope and cleaning kit are available on request for cabling work.
For recurring work, remote hands can be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request. Prices are quoted on request and depend on the customer and the size of the job, so a procurement manager receives a quote that matches the actual scope of work rather than a generic tariff.
Continuity is handled by naming people in advance. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so an absence on the primary engineer's side does not leave the site without someone who knows the customer's setup.
Some customers want the whole stack handled. Under the IT infrastructure turnkey and run service, you or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. The data center itself stays with its operator.
How Reboot Monkey Works
These terms apply in every facility in Austria where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Remote Hands in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a customer whose equipment is spread over more than one country, remote hands requests are placed the same way at each site: an instruction that names the rack, the device and the task, followed by an engineer dispatched to the customer's facility.
If your racks are also in Australia, you can place the same service through Remote Hands in Australia, which covers the work for equipment in that country.
When one installation has to be carried out at several of the customer's sites, multi-site rollouts apply. This is one installation programme carried out at those sites by Reboot Monkey engineers, under one agreement. It replaces a series of separate remote hands requests with a single programme that has one scope and one set of terms. Where a site is being given up, datacenter exit and relocation covers the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired.
Remote hands is the right entry point when the work is a defined physical task. A buyer with a larger deployment, a move or a rollout can describe it in the first message, and Reboot Monkey will state which services the work falls under. Prices for each are quoted on request.
Frequently Asked Questions
What does remote hands cover in Austria?
Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, a separate service. Installing new hardware is rack and stack, and moving equipment between racks, rooms or facilities is server migration.
Do you provide on-site IT support in Austria data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility and work at the customer's rack on the customer's instruction. A request starts with the customer naming the rack, the device and the task. Work that needs diagnostic judgement and configuration knowledge is delivered as smart hands, and recurring work can be agreed as a retainer or a block of hours.
Do you work in every datacenter in Austria?
Reboot Monkey engineers work in any facility in Austria where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Austria?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with remote hands in Austria?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Cities we cover in Austria
Place a Remote Hands Request
Describe the rack, the device and the task. Prices are quoted on request and depend on the customer and the size of the job.