Map: Natural Earth
Rack and Stack
Server Racking in Czech Republic
Server racking in Czech Republic is the installation of new hardware in the customer's racks: installing, mounting and cabling it, with cabling, labelling and power-on checks in scope. Reboot Monkey dispatches engineers to the customer's facility to carry out the work, and quotes are on request.
8
of our services in Czech Republic
Choose your city
Services in Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
- ITADon request
In depth
Rack and Stack: 7 sections, open any to read more.
Server Racking in Czech Republic: How It Works
Rack and stack is the installation of new hardware in a customer's racks: installing, mounting and cabling it. In Czech Republic, Reboot Monkey delivers this as a physical datacenter service, with its engineers dispatched to the customer's facility to carry out the work. The scope is stated plainly. Rack and stack work covers cabling, labelling and power-on checks; quotes are on request.
Each of the three parts has a clear purpose. Cabling connects every mounted device to the rest of the rack and to the network equipment around it. Labelling means that cables and devices can be identified later by whoever works in that rack next, whether that is a Reboot Monkey engineer on a later visit or the customer's own staff. Power-on checks establish that each device starts once it is installed. Together they turn a delivery of boxes into installed equipment that the customer's own teams can take over.
A request begins when the customer tells Reboot Monkey which hardware is to be installed and in which data center. The quote that follows is built around that job, and prices depend on the customer and the size of the job. Because the scope is defined, a procurement manager can set the quote against the customer's own hardware list and see what is included before the work is ordered.
Staffing is settled alongside the scope: a second, briefed Reboot Monkey engineer is named as backup for every customer site.
The installation takes place inside a building that Reboot Monkey does not run. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
Rack and stack is distinct from the neighbouring services, and the boundary decides which one to request. Server migration is moving equipment between racks, rooms or facilities, so hardware that already runs somewhere belongs under that service. Remote hands are physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. A new installation is rack and stack, while moving existing equipment or looking after it afterwards falls to those other services.
A new or expanding deployment can begin before any hardware arrives, with rack and network design: the rack layout and the network topology of the deployment, ending with documentation of the design and a controlled handover. The documentation gives the installation work a defined layout to follow and gives the customer a written record of what was designed.
Where the customer also wants the installed equipment recorded, asset inventory work records the equipment in the data center by serial number, asset tag and rack position, against the customer's asset list. The record can then be compared with what the customer expected to find in each rack.
Datacenter Landscape in Czech Republic
Data centres in Czech Republic, ordered by the number of networks present:
- CE Colo Prague (CE Colo Czech s.r.o.), Nad Elektrarnou 1428/47, 10600 Prague: 152 networks; carriers 1-IX EU, Arelion, Core-Backbone, Global Network Management, Inter.link and others
- TTC TELEPORT DC1 (TTC Teleport s.r.o.), Tiskarska 10, 10000 Prague: 80 networks; carriers Core-Backbone and RETN
- TTC TELEPORT DC2 (TTC Teleport s.r.o.), Sazecska 10, Prague: 31 networks; carriers Nextremum
- GTS Telehouse Prague (GTS Novera, a.s.), Vinohradská 190, 13000 Prague: 17 networks
- DC Tower Zizkov CRa (Radiokomunikace, a.s.), Mahlerovy sady 1, 130 00 Prague: 16 networks; carriers Arelion
- Master DC Brno (Master Internet s.r.o.), Cejl 20, 60200 Brno: 7 networks; carriers RETN
- DC Coolhousing - Prague (Coolhousing s.r.o.), Vinohradská 2405/190, 130 00 Prague: 6 networks
- CE Colo DC7 Prague (CE Colo Czech s.r.o.), K Pérovně 1616/2, 102 00 Prague: 5 networks
- Casablanca INT s.r.o. (ACTIVE 24, s.r.o.), Vinohradská 184, 130 52 Prague: 5 networks
- Shiran Datacenter (FreeTel, s.r.o.), Luzna 716/2, 16000 Prague 6: 5 networks
Rack and Stack by City
City pages for rack and stack in Czech Republic:
- Prague: https://www.rebootmonkey.com/en/czech-republic/prague/rack-and-stack/
Server Racking in Czech Republic: What We Deliver
Racked hardware becomes useful once it is cabled, connected to a network and supplied with the parts it needs. Reboot Monkey delivers each of these steps for deployments in Czech Republic, and the services below sit around the rack and stack work itself.
Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. For the cabling between the customer's racks and network equipment as a piece of work in its own right, structured cabling covers installing, labelling and patching. Where a link runs over fibre, a fibre inspection scope and cleaning kit are available on request.
The services that most often accompany a server installation are these:
- Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request. The hardware and its installation can come from the same supplier.
- GPU and AI cluster deployment: racking, cabling and node swaps for a GPU or AI cluster, also offered as a GPU and AI deployment package. Node swaps are part of the scope as well as the first racking and cabling.
- IP transit: offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. The buyer states the data center and the capacity, and the quote follows from those two details.
- IPv4 leasing: leasing IPv4 addresses, alone or together with IP transit and rack space under one agreement.
- Dark fibre and wavelengths: dark fibre between data centres and wavelength circuits, ordered from the carriers and quoted on request.
- Multi-site rollouts: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers, under one agreement. Customers whose hardware is going into Czech Republic and other countries at the same time can use this instead of arranging each site separately.
- Datacenter exit and relocation: the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired.
Why Reboot Monkey for Server Racking in Czech Republic
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and does not own datacenters. For a buyer, that defines the relationship: Reboot Monkey installs and supports the customer's deployment and is not the party hosting it.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.
Support after the installation is handled through services that share the same engineers' field work. Remote hands carries out physical tasks on the customer's instruction, and smart hands takes on technical work that needs diagnostic judgement and configuration knowledge. For recurring work, remote hands can be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request. Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC, so the customer's servers and network equipment can be watched after the racking is complete.
The end of a hardware generation is covered by the same supplier. Data center decommissioning is the removal and disposal of retired hardware. IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. Where the customer wants the buyback of retired hardware as part of the same job, ITAD with buyback is quoted case by case. A customer replacing a server estate in Czech Republic can therefore order the new installation and the retirement of the old equipment from one supplier.
Some customers do not want to run the infrastructure at all. For them, Reboot Monkey offers IT infrastructure turnkey and run: you or your investors fund the IT infrastructure, and Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. The racking in that arrangement is part of a wider service, and the customer receives running infrastructure rather than a list of tasks to coordinate.
To start, send Reboot Monkey a description of the hardware, the data center and the work expected. The reply is a quote for that job, with the scope of cabling, labelling and power-on checks defined and a briefed backup engineer named for the site.
How Reboot Monkey Works
These terms apply in every facility in Czech Republic where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Czech Republic?
Rack and stack covers installing, mounting and cabling new hardware in the customer's racks. The work includes cabling, labelling and power-on checks, and quotes are on request. Reboot Monkey engineers are dispatched to the customer's facility in Czech Republic to carry it out, and a second, briefed Reboot Monkey engineer is named as backup for every customer site.
Do you work in every datacenter in Czech Republic?
Reboot Monkey engineers work in any facility in Czech Republic where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Czech Republic?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with rack and stack in Czech Republic?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Cities we cover in Czech Republic
Request a quote for rack and stack
Describe the hardware and the data center, and Reboot Monkey will quote the job.