Skip to content
Map of the Czech Republic: data centres as dots, the larger cities circled

Map: Natural Earth

Remote Hands

Data Center Remote Hands in Czech Republic

Remote hands in Czech Republic are physical tasks carried out inside a data center on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the customer's facility to carry out the work, inside data centres that other companies own and run.

  • 8

    of our services in Czech Republic

Choose your city

In depth

Remote Hands: 7 sections, open any to read more.

Data Center Remote Hands in Czech Republic: How It Works

A request for remote hands in Czech Republic starts with a task the customer can name. Remote hands means physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. The customer decides what has to happen at the rack, and a Reboot Monkey engineer is dispatched to the customer's facility to carry out that instruction.

The boundary with other services matters when a request is written. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, and it is scoped as such. A task that can be written as a clear physical instruction, such as which device to restart or which cable to check, belongs to remote hands. Stating the device, the rack and the expected result in the request lets the engineer act on the instruction as written.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own data centers. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

A precise instruction shortens the work at the rack. It names the facility, the rack position and the device by asset tag or serial number, the action required and any condition attached to it, for example to check a cable before replacing it. Customers who keep an equipment list by serial number, asset tag and rack position give the engineer a reference to work against, and the same list is what an asset inventory is checked against later.

Each instruction is easier to carry out, and to confirm afterwards, when it is written as a single task. Several unrelated tasks in one message are better listed one by one, in the order the customer wants them done, so that each can be closed separately.

From first contact to finished work, a request follows three steps:

  • Instruction: the customer states the task, the device or rack concerned and the facility where it stands.
  • Matching: Reboot Monkey assigns the request to the right service. Remote hands covers an instructed physical task, smart hands covers work that needs diagnostic judgement, and rack and stack covers new hardware.
  • Execution: a Reboot Monkey engineer is dispatched to the customer's facility and carries out the task as instructed, on the customer's equipment and the cabling in the customer's rack.

Datacenter Landscape in Czech Republic

Data centres in Czech Republic, ordered by the number of networks present:

  • CE Colo Prague (CE Colo Czech s.r.o.), Nad Elektrarnou 1428/47, 10600 Prague: 152 networks; carriers 1-IX EU, Arelion, Core-Backbone, Global Network Management, Inter.link and others
  • TTC TELEPORT DC1 (TTC Teleport s.r.o.), Tiskarska 10, 10000 Prague: 80 networks; carriers Core-Backbone and RETN
  • TTC TELEPORT DC2 (TTC Teleport s.r.o.), Sazecska 10, Prague: 31 networks; carriers Nextremum
  • GTS Telehouse Prague (GTS Novera, a.s.), Vinohradská 190, 13000 Prague: 17 networks
  • DC Tower Zizkov CRa (Radiokomunikace, a.s.), Mahlerovy sady 1, 130 00 Prague: 16 networks; carriers Arelion
  • Master DC Brno (Master Internet s.r.o.), Cejl 20, 60200 Brno: 7 networks; carriers RETN
  • DC Coolhousing - Prague (Coolhousing s.r.o.), Vinohradská 2405/190, 130 00 Prague: 6 networks
  • CE Colo DC7 Prague (CE Colo Czech s.r.o.), K Pérovně 1616/2, 102 00 Prague: 5 networks
  • Casablanca INT s.r.o. (ACTIVE 24, s.r.o.), Vinohradská 184, 130 52 Prague: 5 networks
  • Shiran Datacenter (FreeTel, s.r.o.), Luzna 716/2, 16000 Prague 6: 5 networks

Remote Hands by City

City pages for remote hands in Czech Republic:

  • Prague: https://www.rebootmonkey.com/en/czech-republic/prague/remote-hands/

Data Center Remote Hands in Czech Republic: What We Deliver

The core of the service is the instructed physical task. Typical requests are a reboot of a named device, a cable check on a named link, a component swap and a visual check of a rack. Where a swap needs a replacement part, the customer can supply it, or ask for spares to be kept in the customer's rack so that the part is at hand when the instruction arrives.

On-site IT support in Czech Republic data centers is delivered as a set of defined services, so that each request is matched to the work it needs. Around remote hands, these services are available:

- Rack and stack: installing, mounting and cabling new hardware. - Server migration: moving equipment between racks, rooms or facilities. - Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment. - Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list. - Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover. - GPU and AI cluster deployment: racking, cabling and node swaps.

Connectivity work follows the ordering route of the facility. Cross connects and carrier circuits are ordered from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request. For cable checks on fibre links, a fibre inspection scope and cleaning kit are available on request.

When equipment reaches the end of its time in a rack, the physical side is handled by the same engineers. Data center decommissioning is the removal and disposal of retired hardware. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. IT asset disposition with buyback covers retired hardware that the customer wants to resell, quoted case by case.

Why Reboot Monkey for Data Center Remote Hands in Czech Republic

Remote hands is one part of what Reboot Monkey sells, and the other parts are the ones a deployment in a data center depends on. Reboot Monkey supplies data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request. A component swap can therefore draw on spares held in the customer's own rack, and the engineer who fits the part is a Reboot Monkey engineer.

Reboot Monkey also sells the network for the rack. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. IPv4 addresses can be leased alone or together with IP transit and rack space under one agreement. Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC, and it sits alongside the hands-on work.

On the staffing side, a second, briefed Reboot Monkey engineer is named as backup for every customer site.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Multi-site rollouts are one installation programme carried out at several of the customer's sites by Reboot Monkey engineers, under one agreement.

Recurring work is handled with remote hands retainers and hour blocks: remote hands agreed as a retainer or as a block of hours for recurring work, with terms agreed per customer and quoted on request. A one-off instruction suits an occasional task. A retainer or a block of hours suits work that returns, such as scheduled reboots or regular cable checks, because the terms are agreed once instead of for each request.

For customers who want the infrastructure run end to end, IT infrastructure turnkey and run works as follows: you or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose.

Prices are quoted on request and depend on the customer and the size of the job. A request for a quote is easiest to answer when it names the task, the facility and whether the work is a single visit or recurring work. The terms for a retainer or a block of hours are agreed per customer at that point.

How Reboot Monkey Works

These terms apply in every facility in Czech Republic where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Czech Republic?

Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer is dispatched to the customer's facility in Czech Republic to carry out the task. Work that needs diagnostic judgement and configuration knowledge is scoped as smart hands, and installing new hardware is scoped as rack and stack. Recurring tasks can be agreed as a retainer or a block of hours.

Do you provide on-site IT support in Czech Republic data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's data center in Czech Republic for remote hands tasks, smart hands work, rack and stack, structured cabling and server migration. A request names the task, the device and the facility, and the engineer carries it out as instructed. Each request is matched to the service that fits the work.

Do you work in every datacenter in Czech Republic?

Reboot Monkey engineers work in any facility in Czech Republic where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Czech Republic?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with remote hands in Czech Republic?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Remote Hands in Czech Republic

Send the task, the device and the facility, and Reboot Monkey will quote the work.

Published:

Get a quote