Map: Natural Earth
Data Center Migration
Data Center Migration in Denmark
Data center migration in Denmark is the physical move of a customer's equipment between racks, rooms or facilities, including the removal and disposal of retired hardware. Reboot Monkey engineers are dispatched to the customer's facility, and the scope is agreed per project and quoted on request.
9
of our services in Denmark
Choose your city
Services in Data Center Migration
In depth
Data Center Migration: 7 sections, open any to read more.
Data Center Migration in Denmark: How It Works
A data center migration is a physical project before it is anything else. Equipment has to be disconnected, moved, reconnected and tested, and any hardware that is being retired has to be removed. Reboot Monkey handles this work in Denmark as a third-party datacenter services operator: engineers are dispatched to the customer's facility, and the plan is built around the customer's own equipment list and destination.
The first decision on any migration is who does what. Reboot Monkey can run the whole physical move or work alongside the customer's own team; who disconnects, reconnects and tests the equipment is agreed per project. A customer with a capable in-house team can therefore keep part of the work, while a customer without spare engineering capacity can hand over the entire move.
A migration request moves through the stages below. Not every project needs every stage, and the scope is agreed with the customer before work starts.
- Request and quote. The customer describes the equipment to be moved, where it stands today and where it is going. Prices are quoted on request and depend on the customer and the size of the job, so the quote follows the equipment list and the destination the customer supplies.
- Inventory. Where the project includes it, the equipment in the data center is recorded by serial number, asset tag and rack position, against the customer's asset list. The result is a record of what stands in each rack position, and the move and any retirement of hardware can be checked against it.
- Destination design. For a new or expanding deployment, the rack layout and the network topology are designed first, and the work ends with documentation of the design and a controlled handover. The customer receives that documentation as the written record of what was built.
- Connectivity. The cross connects and carrier circuits that the new location needs are arranged alongside the move, so the network is planned together with the equipment.
- The move. Reboot Monkey engineers are dispatched to the customer's facility and carry out the tasks the project agreement assigns to them, working alongside the customer's team where the customer has kept part of the work.
- Retired hardware. Where equipment is not moving to the new location, it is removed and disposed of as part of the same project, as data center decommissioning, with IT asset disposition (ITAD) available for the data wiping, collection and resale or buyback of the hardware.
Datacenter Landscape in Denmark
Data centres in Denmark, ordered by the number of networks present:
- Digital Realty Copenhagen CPH1-3, Industriparken 20A, Ballerup, 2750 Copenhagen: 99 networks; carriers 31173 Services, Arelion, Bahnhof, Core-Backbone, Inter.link and others
- GlobalConnect Taastrup 1 (CPH1) (GlobalConnect Group), Hørskætten 3-5 and 12, 2630 Taastrup: 57 networks; carriers Blix, NL-ix, Norlys, Portlane, RETN and others
- Norlys Telehouse Copenhagen (Norlys Digital), Sydvestvej 100, Glostrup, 2600 Copenhagen: 18 networks; carriers Arelion, Bahnhof, Norlys and Portlane
- GlobalConnect Kolding (GlobalConnect Group), Kokbjerg 8, 6000 Kolding: 13 networks
- Norlys Copenhagen (Ørestad/OSD) (Norlys Digital), Metrovej 1, Ørestad, 2300 København S: 9 networks; carriers Arelion and Norlys
- UNI-C (Styrelsen for It og Læring), DTU building 304, 2800 Lyngby: 8 networks; carriers Norlys
- Adeo Datacenter (Adeo DC ApS), herstedvang 8, 2620 Albertslund: 7 networks
- Labicolo (Labitat), H.c. Ørsteds Vej 5, 1879 Frederiksberg C: 7 networks
- GlobalConnect Stilling (GlobalConnect Group), Niels Bohrs Vej 19, DK-8660 Skanderborg: 6 networks
- GlobalConnect Taastrup 2 (GlobalConnect Group), Hørskætten 6C, 2630 Taastrup: 6 networks; carriers Bahnhof
Data Center Migration by City
City pages for data center migration in Denmark:
- Copenhagen: https://www.rebootmonkey.com/en/denmark/copenhagen/data-center-migration/
Data Center Migration in Denmark: What We Deliver
The services below are the ones a migration draws on. A project uses the ones it needs, and each is delivered by Reboot Monkey engineers or staff inside the data center the customer uses. Two questions settle the scope early: which equipment is moving, and which equipment is being retired. The answers decide whether the project is a server migration, a datacenter exit and relocation, or a combination with decommissioning, and the quote follows that scope.
- Server migration: moving equipment between racks, rooms or facilities. This is the core of a migration engagement, and who disconnects, reconnects and tests the equipment on the day follows what was agreed for the project.
- Datacenter exit and relocation: the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. It is the service for a project in which the old location is being given up.
- Rack and stack: installing, mounting and cabling new hardware. It applies where the destination receives new equipment alongside the moved equipment.
- Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment, carried out by Reboot Monkey engineers in the customer's racks.
- Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover.
- Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
- Cross-connects and carrier circuits: ordered from the facility operator and the carriers present in the facility, with Reboot Monkey engineers installing and patching the cabling in the customer's rack.
- Multi-site rollouts: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. A move that touches more than one location can be run as a single programme.
- GPU and AI cluster deployment: racking, cabling and node swaps for a GPU or AI cluster, for a cluster that is moving or one that is being built at the destination.
- Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
- Data center decommissioning: removing and disposing of retired hardware at the location the customer is leaving.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- ITAD with buyback: IT asset disposition with the buyback of the retired hardware, quoted case by case.
Why Reboot Monkey for Data Center Migration in Denmark
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and does not own datacenters. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
A second, briefed Reboot Monkey engineer is named as backup for every customer site.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.
A migration ends when the equipment runs at its new location, but the customer's need for hands and network continues. The same operator can supply the following once the move is complete.
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge.
- Remote hands retainers and hour blocks: remote hands agreed as a retainer or as a block of hours for recurring work, with terms agreed per customer and quoted on request.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
- IP transit: offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs.
- IPv4 leasing: leasing IPv4 addresses, alone or together with IP transit and rack space under one agreement.
- Dark fibre and wavelengths: dark fibre between data centres and wavelength circuits, ordered from the carriers and quoted on request.
- IT infrastructure turnkey and run: the customer or its investors fund the IT infrastructure, and Reboot Monkey buys, installs, configures and then runs it, inside the data center the customer chooses. The data center itself stays with its operator.
How Reboot Monkey Works
These terms apply in every facility in Denmark where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data Center Migration
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does data center migration cover in Denmark?
Data center migration covers the physical move of a customer's equipment: moving it between racks, rooms or facilities and, where a location is given up, removing and disposing of the retired hardware. Reboot Monkey can run the whole physical move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project.
Do you work in every datacenter in Denmark?
Reboot Monkey engineers work in any facility in Denmark where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Denmark?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with data center migration in Denmark?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center migration work is scheduled under the operator's rules.
Cities we cover in Denmark
Plan a data center migration in Denmark
Send the equipment list and the destination, and Reboot Monkey will agree the scope and the division of work with you.