Skip to content
Map of Denmark: data centres as dots, the larger cities circled

Map: Natural Earth

Remote Hands

Remote Hands in Denmark

Remote hands in Denmark means Reboot Monkey engineers carry out physical tasks at your equipment inside the data center, on your instruction: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement is handled separately as smart hands.

  • 9

    of our services in Denmark

In depth

Remote Hands: 8 sections, open any to read more.

Remote Hands in Denmark: How It Works

Remote hands in Denmark is the service that places a Reboot Monkey engineer at your equipment when your own staff are elsewhere. The engineer carries out physical tasks on the customer's instruction: reboots, cable checks, component swaps and visual checks. You decide what is to be done and describe it, the engineer does it at the rack, and you receive the outcome. Technical work that needs diagnostic judgement and configuration knowledge is a different service, smart hands, and the services are scoped separately so that each request is staffed and quoted for what it involves.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. For a request in Denmark, this means the work takes place in the facility where your equipment already stands. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For each job, an engineer is dispatched to the customer's facility in Denmark, and a second, briefed Reboot Monkey engineer is named as backup for every customer site.

A request begins with a written instruction from the customer. A useful instruction names the facility, the rack and the position of the device, and states the action to be taken, such as rebooting a server that has stopped responding or checking that a cable is seated in the port you name. Reboot Monkey reviews the instruction, confirms whether it falls under remote hands or needs the judgement of smart hands, and assigns the engineer. Prices are quoted on request and depend on the customer and the size of the job.

Because remote hands is defined by the customer's instruction, the engineer's task is limited to what the instruction says. If the job turns out to need diagnosis or configuration, that part is a smart hands job and is handled as such.

Datacenter Landscape in Denmark

Data centres in Denmark, ordered by the number of networks present:

  • Digital Realty Copenhagen CPH1-3, Industriparken 20A, Ballerup, 2750 Copenhagen: 99 networks; carriers 31173 Services, Arelion, Bahnhof, Core-Backbone, Inter.link and others
  • GlobalConnect Taastrup 1 (CPH1) (GlobalConnect Group), Hørskætten 3-5 and 12, 2630 Taastrup: 57 networks; carriers Blix, NL-ix, Norlys, Portlane, RETN and others
  • Norlys Telehouse Copenhagen (Norlys Digital), Sydvestvej 100, Glostrup, 2600 Copenhagen: 18 networks; carriers Arelion, Bahnhof, Norlys and Portlane
  • GlobalConnect Kolding (GlobalConnect Group), Kokbjerg 8, 6000 Kolding: 13 networks
  • Norlys Copenhagen (Ørestad/OSD) (Norlys Digital), Metrovej 1, Ørestad, 2300 København S: 9 networks; carriers Arelion and Norlys
  • UNI-C (Styrelsen for It og Læring), DTU building 304, 2800 Lyngby: 8 networks; carriers Norlys
  • Adeo Datacenter (Adeo DC ApS), herstedvang 8, 2620 Albertslund: 7 networks
  • Labicolo (Labitat), H.c. Ørsteds Vej 5, 1879 Frederiksberg C: 7 networks
  • GlobalConnect Stilling (GlobalConnect Group), Niels Bohrs Vej 19, DK-8660 Skanderborg: 6 networks
  • GlobalConnect Taastrup 2 (GlobalConnect Group), Hørskætten 6C, 2630 Taastrup: 6 networks; carriers Bahnhof

Remote Hands by City

City pages for remote hands in Denmark:

  • Copenhagen: https://www.rebootmonkey.com/en/denmark/copenhagen/remote-hands/

Remote Hands in Denmark: What We Deliver

Buyers who ask for on-site IT support in Denmark data centers usually need one service from a short list, and the right one depends on whether the task is a physical action or needs judgement. Remote hands covers the physical actions. The services around it are defined as follows.

Larger programmes build on the same engineers. GPU and AI cluster deployment covers racking, cabling and node swaps. Data center decommissioning covers removing and disposing of retired hardware. Datacenter exit and relocation covers the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired.

Each of these is requested the same way as remote hands: the customer states the equipment, the location and the task, and Reboot Monkey scopes the work and quotes it.

  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
  • Cross-connects and carrier circuits: ordered from the facility operator and the carriers present in the facility, with Reboot Monkey engineers installing and patching the cabling in the customer's rack.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
  • Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
  • Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
  • Remote hands retainers and hour blocks: remote hands agreed as a retainer or as a block of hours for recurring work, with terms agreed per customer and quoted on request.

What Remote Hands Looks Like in Practice

A remote hands job in Denmark usually falls into one of a few kinds. A reboot restarts a server or network device that has stopped responding. A cable check confirms that a cable is connected, seated and labelled as the customer's documentation says. A component swap replaces a failed part with a spare the customer has on hand. A visual check reports what the engineer sees at the rack, on a device the customer names.

The sequence is the same each time. The customer sends the instruction. Reboot Monkey confirms the scope and names the engineer and the backup. The engineer is dispatched to the facility and carries out the task at the rack. The engineer then reports the result to the customer, and the customer decides on the next step.

The line between remote hands and smart hands is judgement. If the instruction can be written as a single physical action, it is remote hands. If the engineer must diagnose a fault, interpret a configuration or choose between options, it is smart hands. A job that starts as remote hands can therefore turn into smart hands once a check shows that more is needed, and the technical work is then handled as smart hands.

Cabling is a frequent subject of remote hands requests. A fibre inspection scope and cleaning kit are available on request for jobs that involve fibre cabling.

There are prerequisites. The customer's equipment must already be installed in the facility, because installing new hardware is rack and stack and not remote hands. The instruction must identify the device clearly, so that the engineer acts on the right equipment at the right rack position. Spare parts for a swap must be on hand or supplied beforehand. Customers who expect the same task to recur, such as a routine check of a rack, can agree the work as a retainer or a block of hours instead of sending each instruction as a new request.

Why Reboot Monkey for Remote Hands in Denmark

Remote hands is rarely the only thing a deployment needs, so it matters that the neighbouring services come from the same operator. Reboot Monkey sells the network for the rack. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. IPv4 addresses can be leased alone or together with IP transit and rack space under one agreement.

Reboot Monkey does not own or operate datacenters, so its remote hands service is not tied to renting space in a building it runs. The work follows the customer's equipment into the data center the customer has chosen. Customers who want the whole stack handled can use IT infrastructure turnkey and run: you or your investors fund the IT infrastructure, and Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose.

A customer with sites in Denmark and in other countries can place a rollout as one installation programme carried out by Reboot Monkey engineers at several of those sites.

A few questions are worth settling with Reboot Monkey before the first job, because they are specific to your equipment and decide how the request is scoped:

  • Which racks and devices the instruction will cover.
  • Who on the customer's side may send instructions.
  • Whether spare parts will be on hand for component swaps.
  • Whether the work is a single request or recurring.
  • Whether any of it needs smart hands rather than remote hands.

How Reboot Monkey Works

These terms apply in every facility in Denmark where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Denmark?

Remote hands covers physical tasks that Reboot Monkey engineers carry out at the customer's equipment on the customer's instruction: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing new hardware is rack and stack. Remote hands can also be agreed as a retainer or as a block of hours for recurring work.

Do you provide on-site IT support in Denmark data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility to carry out the work on site. Physical tasks are remote hands, and technical work that needs diagnostic judgement and configuration knowledge is smart hands. A request starts with the customer's instruction, and a second, briefed Reboot Monkey engineer is named as backup for every customer site. Prices are quoted on request.

Do you work in every datacenter in Denmark?

Reboot Monkey engineers work in any facility in Denmark where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Denmark?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with remote hands in Denmark?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Remote Hands in Denmark

Send the facility, the equipment and the task, and Reboot Monkey will scope the work and quote it.

Published:

Get a quote