Map: Natural Earth
Smart Hands
Smart Hands in Denmark
Smart hands in Denmark is technical work inside the data center that needs diagnostic judgement and configuration knowledge. Reboot Monkey dispatches engineers to the customer's racks to provide on-site IT support in Denmark data centers, from diagnosis to configuration changes and hardware work.
9
of our services in Denmark
Choose your city
Services in Smart Hands
In depth
Smart Hands: 7 sections, open any to read more.
Smart Hands in Denmark: How It Works
Smart hands is technical work that needs diagnostic judgement and configuration knowledge. Remote hands, by comparison, is physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. The practical difference is who decides what the work involves. With remote hands the customer states exactly what to do and the engineer does it. With smart hands the engineer is asked to find the cause of a problem or to configure equipment, and to make the decisions the job requires.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own data centers. For smart hands work in Denmark this means the job is done where the customer's equipment already stands, in the customer's own racks, by Reboot Monkey engineers dispatched to the facility.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Smart hands work covers the customer's equipment in the rack, not the building around it.
A request starts with the customer describing the job: which equipment is affected, where it stands in the rack, what the symptom or the required change is, and what the customer has already tried. From that description Reboot Monkey establishes whether the work is remote hands or smart hands and scopes it. Prices are quoted on request and depend on the customer and the size of the job. When the scope is agreed, a Reboot Monkey engineer is dispatched to the customer's facility in Denmark and carries out the work in the customer's racks.
Some jobs change category while they are under way. A reboot is remote hands work; a reboot that does not restore the service and raises a question about configuration is smart hands work. For recurring work, remote hands can also be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request.
A request is easier to act on when it states:
- the affected equipment and its position in the rack
- the symptom, or the change that is required
- configuration details and any recent change that may be related
- a customer contact who can be reached while the engineer is on site
Datacenter Landscape in Denmark
Data centres in Denmark, ordered by the number of networks present:
- Digital Realty Copenhagen CPH1-3, Industriparken 20A, Ballerup, 2750 Copenhagen: 99 networks; carriers 31173 Services, Arelion, Bahnhof, Core-Backbone, Inter.link and others
- GlobalConnect Taastrup 1 (CPH1) (GlobalConnect Group), Hørskætten 3-5 and 12, 2630 Taastrup: 57 networks; carriers Blix, NL-ix, Norlys, Portlane, RETN and others
- Norlys Telehouse Copenhagen (Norlys Digital), Sydvestvej 100, Glostrup, 2600 Copenhagen: 18 networks; carriers Arelion, Bahnhof, Norlys and Portlane
- GlobalConnect Kolding (GlobalConnect Group), Kokbjerg 8, 6000 Kolding: 13 networks
- Norlys Copenhagen (Ørestad/OSD) (Norlys Digital), Metrovej 1, Ørestad, 2300 København S: 9 networks; carriers Arelion and Norlys
- UNI-C (Styrelsen for It og Læring), DTU building 304, 2800 Lyngby: 8 networks; carriers Norlys
- Adeo Datacenter (Adeo DC ApS), herstedvang 8, 2620 Albertslund: 7 networks
- Labicolo (Labitat), H.c. Ørsteds Vej 5, 1879 Frederiksberg C: 7 networks
- GlobalConnect Stilling (GlobalConnect Group), Niels Bohrs Vej 19, DK-8660 Skanderborg: 6 networks
- GlobalConnect Taastrup 2 (GlobalConnect Group), Hørskætten 6C, 2630 Taastrup: 6 networks; carriers Bahnhof
Smart Hands by City
City pages for smart hands in Denmark:
- Copenhagen: https://www.rebootmonkey.com/en/denmark/copenhagen/smart-hands/
Smart Hands in Denmark: What We Deliver
Smart hands in Denmark is not a single task. It is the part of a data center engagement where the engineer applies judgement to the customer's equipment, and it connects to a set of defined services that Reboot Monkey engineers carry out in the customer's racks. The work falls into these groups: installation and change, connectivity, records and hardware, and end of life.
Installation and change work covers new equipment and equipment that moves:
- Rack and stack: installing, mounting and cabling new hardware. - Server migration: moving equipment between racks, rooms or facilities. - Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment. - GPU and AI cluster deployment: racking, cabling and node swaps. - Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover.
Connectivity work follows the same pattern. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request. IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. Where a fibre link needs checking or cleaning, a fibre inspection scope and cleaning kit are available on request.
Records and hardware are handled alongside the physical work. Inventory work records the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list. Hardware supply and spares covers data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request. Hardware monitoring is carried out by the Reboot Monkey NOC, which monitors the customer's servers and network equipment.
When equipment reaches the end of its life, data center decommissioning removes and disposes of the retired hardware. Datacenter exit and relocation covers the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired.
Multi-site rollouts are one installation programme carried out at several of the customer's sites by Reboot Monkey engineers, under one agreement. A customer with equipment at several sites, in Denmark or elsewhere, can have the installation work run as one programme.
A single visit can include more than one of these. A request that names a component swap, a new cabling run and an update to the asset record lets the engineer work through all three at the rack in one visit. The limit of smart hands is the customer's equipment and the cabling in the customer's rack.
Why Reboot Monkey for Smart Hands in Denmark
Smart hands is seldom the only requirement. The equipment that needs hands-on work also needs rack space, connectivity and often hardware, and Reboot Monkey sells these next to the engineers who install and support them. A smart hands job in Denmark can therefore sit inside a wider order. Reboot Monkey is not limited to the hands-on layer: the range around it runs from cabling and hardware to IP transit and monitoring.
Hardware and addresses follow the same logic. Hardware supply is part of the range, so the part and the engineer who fits it come from the same operator. IPv4 leasing is available alone or together with IP transit and rack space under one agreement.
Some customers want the infrastructure but not the purchasing and the operation. IT infrastructure turnkey and run is built for that case: You or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. At the level of a single customer site, continuity is handled by naming people: a second, briefed Reboot Monkey engineer is named as backup for every customer site.
These questions settle what a smart hands order has to state:
- Is the task a defined physical step, or does it need diagnosis and configuration? The first is remote hands and the second is smart hands.
- Is it a single visit, recurring work or a programme? Recurring work can be agreed as a remote hands retainer or a block of hours, and a programme across several sites is a multi-site rollout.
- Does the job touch connectivity? Cross-connects and carrier circuits are ordered from the facility operator and the carriers present, and the cabling in the customer's rack is installed and patched by Reboot Monkey engineers.
- Does the job need hardware or spare parts? These can be supplied, and spares can stay in the customer's rack on request.
How Reboot Monkey Works
These terms apply in every facility in Denmark where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
Smart Hands vs. Remote Hands | What's the Difference?
Remote hands is physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. In short, remote hands carries out a step the customer has already decided on, while smart hands covers work where the engineer has to diagnose a problem or configure equipment.
What does smart hands cover in Denmark?
In Denmark, smart hands covers technical work on the customer's equipment in the customer's own racks: work that needs diagnostic judgement and configuration knowledge, plus rack and stack, server migration, structured cabling, node swaps for GPU and AI clusters, equipment inventory, and installing and patching cross-connect cabling. Which of these a job involves is set when the request is scoped.
Do you provide on-site IT support in Denmark data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility in Denmark to work on the customer's equipment in its racks. A request begins with a description of the equipment, its rack position and the symptom or change needed. The job is scoped and quoted on request, then carried out on site by a Reboot Monkey engineer.
Do you work in every datacenter in Denmark?
Reboot Monkey engineers work in any facility in Denmark where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Denmark?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with smart hands in Denmark?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Cities we cover in Denmark
Request Smart Hands in Denmark
Describe the equipment, its rack position and the job. Reboot Monkey scopes the work and quotes it on request.