Iceland · Reykjavik
Remote Hands in Reykjavik
Remote hands in Reykjavik means Reboot Monkey engineers carry out physical tasks in your rack on your instruction: reboots, cable checks, component swaps and visual checks. It is on-site IT support in Reykjavik data centers for teams that run equipment they cannot reach in person, delivered by a third-party operator inside facilities that other companies own and run.
In Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- ITADon request
Remote Hands
8
services detailed for Reykjavik
1
agreement for every city
Plan remote hands for your Reykjavik equipment
Send the site details and the tasks you expect, and Reboot Monkey will quote against them.
In depth
Remote Hands: 8 sections, open any to read more.
Remote Hands in Reykjavik
RIX-K2 stands on Katrínartún in Reykjavik. A team with equipment in the city usually needs a physical action performed quickly and exactly as written, without sending its own staff to the site. That is the job remote hands does. You describe the task, a Reboot Monkey engineer carries it out in your rack, and you receive confirmation of what was done. Reboot Monkey is a third-party datacenter services operator. It does not host your workloads and does not own the buildings where it works.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. For a buyer this has a practical meaning: the work you request is scoped to your own equipment, and access follows whatever procedure the operator has set. Reboot Monkey stays independent of the building, so the same arrangement applies whichever operator runs the space where your hardware sits.
Remote hands is the right choice when the task is physical and fully specified. If the work needs diagnostic judgement or configuration knowledge, it belongs to smart hands, which is a separate service with its own scope.
Datacenter Facilities in Reykjavik
Data centres in Reykjavik, ordered by the number of networks present:
- RIX-K2 (Internet á Íslandi hf), Katrínartún 2, 104 Reykjavik: 8 networks
- RIX-TG (Internet á Íslandi hf), Tæknigarður, Dunhagi 5, 107 Reykjavik: 5 networks
- Ármúli 25 (Mila hf.), Ármúli 25, 108 Reykjavik: 5 networks
- RIX-MH (Internet á Íslandi hf), Suðurlandsbraut 28, 108 Reykjavik: 3 networks
- Reykjavik DC (Opin Kerfi hf.), Blikastaðavegur 2-8, Korputorg, 112 Reykjavik: 2 networks
- SDC Capital (Stormur Datacenters ehf.), Neshaga 16, 107 Reykjavik: 2 networks
- Reykjavík Campus (Borealis Data Center), Blikastaðuavegur 2-8, 112 Reykjavík: 1 network
- Borealis Data Center, Suðurlandsbraut 4, 108 Reykjavík
- DataCell Reykjavik 1, Höfdatorg, 101 Reykjavik
Our Remote Hands Services
Remote hands covers physical tasks carried out on the customer's instruction. In Reykjavik that means the following work inside your rack:
- Reboots of servers and network equipment that you instruct us to power-cycle.
- Cable checks, including tracing a run and confirming that a patch is seated where your instruction says it should be.
- Component swaps, where you supply the part and give the exact instruction.
- Visual checks of equipment, such as reading indicator lights and reporting what is displayed.
How a request is handled
A request starts with the instruction you write: which rack, which device, which action, and what you expect to see afterwards. Reboot Monkey engineers carry out that instruction in your rack and report back what they found and what they changed. The clearer the instruction, the less is left to interpretation, so a good request names the device, the port or component, and the end state you want.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. The backup knows the site and your instructions, so a task does not stall because one person is unavailable.
Cabling work follows the same pattern. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A fibre inspection scope and cleaning kit are available on request, which helps when a link will not come up and a dirty or damaged connector is the suspect.
Where remote hands ends and other services begin
Choosing the right service saves time on both sides. Remote hands is for physical tasks that you have already decided on. When a fault needs someone to investigate and decide, smart hands applies: technical work that needs diagnostic judgement and configuration knowledge. When new hardware arrives, rack and stack covers installing, mounting and cabling it. When equipment must move between racks, rooms or facilities, server migration covers the move.
For retired equipment, data center decommissioning handles removing and disposing of hardware, and IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, with resale or buyback quoted case by case. If you would like someone watching your devices continuously, hardware monitoring is the monitoring of your servers and network equipment by the Reboot Monkey NOC.
These services fit together, so a single site can use several of them as its needs change. Prices are quoted on request and depend on the customer and the size of the job.
Why Reboot Monkey
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. For a CTO, IT Director or procurement manager, that means one operator for the physical work around your equipment, with no hosting platform or owned building attached to the relationship.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. If your estate reaches beyond Reykjavik, the same way of working applies to your other sites.
To set up remote hands for your equipment in Reykjavik, send the site details and the kind of tasks you expect, and Reboot Monkey will quote against them.
How Reboot Monkey Works
These terms apply in every facility in Reykjavik where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Reykjavik?
Remote hands covers physical tasks carried out on your instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer performs the task in your rack and reports what was done. Work that needs diagnostic judgement or configuration knowledge is smart hands, and new hardware installation is rack and stack.
Do you provide on-site IT support in Reykjavik data centers?
Yes. Reboot Monkey engineers work on site in your rack. You send an instruction naming the rack, the device and the action, the engineer carries it out and reports back, and a second briefed engineer is named as backup for your site. Prices are quoted on request and depend on the customer and the size of the job.
Do you work in every datacenter in Reykjavik?
Reboot Monkey engineers work in any facility in Reykjavik where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Reykjavik?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with remote hands in Reykjavik?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Plan remote hands for your Reykjavik equipment
Send the site details and the tasks you expect, and Reboot Monkey will quote against them.