Map: Natural Earth
Rack and Stack
Server Racking in Indonesia
Server racking in Indonesia is the installation, mounting and cabling of new hardware inside a data centre that another company owns and runs. Reboot Monkey engineers carry out the work, which covers cabling, labelling and power-on checks. Quotes are provided on request.
8
of our services in Indonesia
Choose your city

Photo: Nanami976 · CC BY-SA 4.0 · cropped · source
Jakarta
- Rack and Stack
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
Services in Rack and Stack
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- ITAD
- Server Migration
- Smart Hands
- Remote Handson request
In depth
Rack and Stack: 8 sections, open any to read more.
Server Racking in Indonesia: How It Works
Server racking in Indonesia, as Reboot Monkey delivers it, is the installation, mounting and cabling of new hardware inside a data centre that another company owns and runs. Reboot Monkey is a third-party datacenter services operator. It is not a hosting company and it does not own datacenters. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, so the space, the equipment, the connectivity and the physical installation can all be ordered from Reboot Monkey.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
To quote the job, Reboot Monkey needs the information any installation needs: which hardware is being installed, in which facility, and what network the rack will use. A rack and stack request in Indonesia then follows a fixed sequence from first contact to finished work.
- First contact: the buyer describes the hardware to be installed, the facility where it is going and the network the rack needs.
- Quote: Reboot Monkey prepares a quote for the job. Prices are quoted on request and depend on the customer and the size of the job.
- Engineer dispatch: a Reboot Monkey engineer is dispatched to the customer's facility, and a second, briefed Reboot Monkey engineer is named as backup for every customer site.
- Installation: the engineer mounts the new hardware in the customer's rack and completes the work agreed in the quote.
- Handover: the rack is left cabled, labelled and checked at power-on, ready for the customer's own configuration or for a follow-on service.
Datacenter Landscape in Indonesia
Data centres in Indonesia, ordered by the number of networks present:
- Datacenter APJII-Cyber (Asosiasi Penyelenggara Jasa Internet Indonesia), Cyber Building, Jalan Kuningan Barat No. 8, 12710 Jakarta Selatan: 752 networks; carriers DETELNETWORKS, GERBANGAKSES and SG.GS
- IDC 3D (PT. Internetindo Data Centra Indonesia), Jl. Duren Tiga Raya No.7H, Duren Tiga, Pancoran, 12760 Jakarta Selatan: 535 networks; carriers DETELNETWORKS, Matrix NAP Info and SG.GS
- NTT Jakarta 2 Data Center (JKT2) (NTT DATA's Global Data Centers division), Jalan Kuningan Barat No.8 NTT building, Kuningan Barat, Mampang Prapatan, Kota Jakarta (inside Cyber Area), 12710: 250 networks; carriers DETELNETWORKS, GERBANGAKSES, Matrix NAP Info and SG.GS
- OMADATA - E1 - SUB (PT Omadata Padma Indonesia), Gedung Intiland, Jl. Panglima Sudirman No.101-103, Embong Kaliasin, Genteng, 60271 Surabaya: 228 networks; carriers Datakom Padma Jaya and Matrix NAP Info
- ProDC (PT SOLUSI DATA CEPAT), Jl. Kuningan Barat Raya No.9B, RT03 RW02, Kelurahan Kuningan Barat, Kecamatan Mampang Prapatan, 12710 Jakarta Selatan: 121 networks; carriers SG.GS
- Cyber Data Center International Jakarta, Cyber Building, 1st & 2nd floor. Jl. Kuningan Barat no. 8, 12710 Jakarta Selatan: 119 networks; carriers Matrix NAP Info
- neuCentrIX - Karet Tengsin (PT Telekomunikasi Indonesia Int), Jl. K.H. Mas Mansyur No.1, RT.13/RW.8, Karet Tengsin, Kecamatan Tanah Abang, 10250 Jakarta Pusat: 118 networks; carriers Matrix NAP Info
- EDGE1 (EG1) - Digital Edge JKT1 - Jakarta (Digital Edge Indonesia), Jl. Kuningan Barat Raya, Kuningan Bar., Kec. Mampang Prpt., 12950 Jakarta Selatan: 93 networks; carriers DETELNETWORKS and Matrix NAP Info
- NEX Datacenter (NEX-JK2) Jakarta (PT. CBN Nusantara (NEX Datacenter)), M-Ten Bldg, Jalan Kapten Tendean 20C, 12710 Jakarta Selatan: 91 networks; carriers DETELNETWORKS and Matrix NAP Info
- Datacenter APJII-Cyber JAKARTA (PT Dexano Ryu Fusena), Jakarta Selatan, Daerah Khusus Ibukota Jakarta, 12710: 74 networks
Rack and Stack by City
City pages for rack and stack in Indonesia:
- Jakarta: https://www.rebootmonkey.com/en/indonesia/jakarta/rack-and-stack/
Server Racking in Indonesia: What We Deliver
Rack and stack work covers cabling, labelling and power-on checks, and quotes are on request. The definition is narrow on purpose: rack and stack means installing, mounting and cabling new hardware. Anything that touches equipment already in service belongs to a different service, and the request is scoped accordingly.
Connectivity is part of the same conversation. Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. For fibre links, a fibre inspection scope and cleaning kit are available on request.
Once the hardware is installed, other Reboot Monkey services cover what comes next. Each is defined by what the work involves:
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey for Server Racking in Indonesia
Reboot Monkey works as a third-party operator inside data centres that other companies own and run. It does not host customer workloads on a platform of its own, and it does not operate the building. What it provides is the physical work and the supply around it: hardware, rack space, IP transit, leased IP addresses and network. For a buyer who needs a rack installed, that separation keeps the responsibilities clear. The operator runs the facility, the customer runs the equipment, and Reboot Monkey installs and supports it.
Continuity on site is handled by naming people before the job starts. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the installation does not depend on a single engineer being available on the day. A procurement manager or IT director can ask for the primary and the backup engineer to be identified as part of the request.
A new rack rarely needs only an installation. It usually needs address space, transit or circuits to be useful. Because Reboot Monkey sells IP transit, leased IP addresses and network alongside the installation, these items can be raised in the same request as the hardware instead of being split across several suppliers. The cabling that connects the rack to those circuits is installed and patched by Reboot Monkey engineers in the customer's rack, and the circuits themselves are ordered from the facility operator and the carriers present in the facility.
The same applies after the installation. Remote hands, smart hands, server migration, decommissioning, ITAD and hardware monitoring are all Reboot Monkey services, so a later change to the same equipment starts from a supplier that has already worked on the rack. The quote for each piece of work is built on the customer and the size of the job, which keeps each request scoped to what is actually being done.
How Reboot Monkey Works
These terms apply in every facility in Indonesia where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Rack and Stack in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a buyer, the practical meaning is that a hardware roll-out does not have to stop at one border. A build that continues in a second or third country can be described in the same request, with each site named separately, and an engineer is dispatched to each customer facility.
Buyers planning installs elsewhere in Asia can look at Rack and Stack in India for projects in that country. Hong Kong is covered on its own page for those who need a rack installed there: Rack and Stack in Hong Kong. For a European installation, Rack and Stack in Ireland sets out the service for Ireland.
For each country the work is the installation, mounting and cabling of new hardware, and the quote is prepared per customer and per job. Equipment that already stands in a rack, or that needs to move between rooms and facilities, is handled as server migration instead. Retired equipment is handled through data center decommissioning and, where data wiping, shredding or degaussing and resale are needed, ITAD.
When a project spans several countries, the request is easiest to scope if each site lists its hardware and its network needs separately. Reboot Monkey then prepares a quote for each job and names a backup engineer for each customer site, in line with how it staffs every other installation.
Frequently Asked Questions
What does rack and stack cover in Indonesia?
Rack and stack covers installing, mounting and cabling new hardware. The work includes cabling, labelling and power-on checks, and quotes are on request. Reboot Monkey engineers carry it out in the customer's facility in Indonesia. Network for the rack is ordered through Reboot Monkey, which orders the cross connects and carrier circuits and patches the cabling in the customer's rack.
Do you work in every datacenter in Indonesia?
Reboot Monkey engineers work in any facility in Indonesia where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Indonesia?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with rack and stack in Indonesia?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Cities we cover in Indonesia
Plan Your Rack and Stack Job in Indonesia
Send the hardware list, the facility and the network the rack needs, and Reboot Monkey will prepare a quote for the job.