Skip to content
Map of Indonesia: data centres as dots, the cities with a Reboot Monkey page highlighted: Jakarta

Map: Natural Earth

Smart Hands

Smart Hands in Indonesia

Smart hands is technical work inside a data center that needs diagnostic judgement and configuration knowledge. Reboot Monkey field engineers are dispatched to the customer's facility in Indonesia to carry it out on the customer's own equipment.

  • 8

    of our services in Indonesia

Choose your city

In depth

Smart Hands: 8 sections, open any to read more.

Smart Hands in Indonesia: How It Works

Smart hands is the service for work inside a data center that needs more than following instructions. Reboot Monkey defines it as technical work that needs diagnostic judgement and configuration knowledge. A business with servers, storage or network equipment housed in a data center in Indonesia uses it when a fault has no obvious cause, when equipment has to be configured as well as installed, or when the people who know the environment are not at the facility.

The difference from remote hands is where the decisions sit. Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Smart hands starts where that instruction runs out. The engineer is expected to judge what is wrong and decide how to put it right.

A request starts with a message to Reboot Monkey that names the facility, the equipment concerned and the outcome the customer needs. Reboot Monkey scopes the job against that information and quotes it. Prices are quoted on request and depend on the customer and the size of the job. Once the job is agreed, a Reboot Monkey field engineer is dispatched to the customer's facility to carry it out.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The visit is therefore planned around the way the building admits people and equipment, not around Reboot Monkey's own preferences.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. The backup is part of how the site is set up for the customer, so the arrangement exists before any job is requested and is not improvised when a visit is needed.

Because the scope is agreed before the engineer is dispatched, the buyer knows which equipment will be touched and what the finished work should look like. Anything outside that scope is raised as a new request instead of being added during the visit.

Datacenter Landscape in Indonesia

Data centres in Indonesia, ordered by the number of networks present:

  • Datacenter APJII-Cyber (Asosiasi Penyelenggara Jasa Internet Indonesia), Cyber Building, Jalan Kuningan Barat No. 8, 12710 Jakarta Selatan: 752 networks; carriers DETELNETWORKS, GERBANGAKSES and SG.GS
  • IDC 3D (PT. Internetindo Data Centra Indonesia), Jl. Duren Tiga Raya No.7H, Duren Tiga, Pancoran, 12760 Jakarta Selatan: 535 networks; carriers DETELNETWORKS, Matrix NAP Info and SG.GS
  • NTT Jakarta 2 Data Center (JKT2) (NTT DATA's Global Data Centers division), Jalan Kuningan Barat No.8 NTT building, Kuningan Barat, Mampang Prapatan, Kota Jakarta (inside Cyber Area), 12710: 250 networks; carriers DETELNETWORKS, GERBANGAKSES, Matrix NAP Info and SG.GS
  • OMADATA - E1 - SUB (PT Omadata Padma Indonesia), Gedung Intiland, Jl. Panglima Sudirman No.101-103, Embong Kaliasin, Genteng, 60271 Surabaya: 228 networks; carriers Datakom Padma Jaya and Matrix NAP Info
  • ProDC (PT SOLUSI DATA CEPAT), Jl. Kuningan Barat Raya No.9B, RT03 RW02, Kelurahan Kuningan Barat, Kecamatan Mampang Prapatan, 12710 Jakarta Selatan: 121 networks; carriers SG.GS
  • Cyber Data Center International Jakarta, Cyber Building, 1st & 2nd floor. Jl. Kuningan Barat no. 8, 12710 Jakarta Selatan: 119 networks; carriers Matrix NAP Info
  • neuCentrIX - Karet Tengsin (PT Telekomunikasi Indonesia Int), Jl. K.H. Mas Mansyur No.1, RT.13/RW.8, Karet Tengsin, Kecamatan Tanah Abang, 10250 Jakarta Pusat: 118 networks; carriers Matrix NAP Info
  • EDGE1 (EG1) - Digital Edge JKT1 - Jakarta (Digital Edge Indonesia), Jl. Kuningan Barat Raya, Kuningan Bar., Kec. Mampang Prpt., 12950 Jakarta Selatan: 93 networks; carriers DETELNETWORKS and Matrix NAP Info
  • NEX Datacenter (NEX-JK2) Jakarta (PT. CBN Nusantara (NEX Datacenter)), M-Ten Bldg, Jalan Kapten Tendean 20C, 12710 Jakarta Selatan: 91 networks; carriers DETELNETWORKS and Matrix NAP Info
  • Datacenter APJII-Cyber JAKARTA (PT Dexano Ryu Fusena), Jakarta Selatan, Daerah Khusus Ibukota Jakarta, 12710: 74 networks

Smart Hands by City

City pages for smart hands in Indonesia:

  • Jakarta: https://www.rebootmonkey.com/en/indonesia/jakarta/smart-hands/

Smart Hands in Indonesia: What We Deliver

Smart hands in Indonesia is delivered as on-site IT support in Indonesia data centers: a Reboot Monkey field engineer is dispatched to the customer's facility and works on the customer's own servers and network equipment. The engineer diagnoses the problem, makes the configuration changes the job calls for, and carries out the physical work that goes with them.

Cabling is part of that work. Reboot Monkey sells the network for the rack, and its engineers install and patch the cabling in the customer's rack. Where a job needs a cross connect or a carrier circuit, Reboot Monkey orders it from the facility operator and from the carriers present in the facility. A fibre inspection scope and cleaning kit are available on request, which matters when a link fails and the fault may sit in the connector, not the equipment.

Smart hands sits beside the other physical services Reboot Monkey runs, and a single request can combine them:

  • Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey for Smart Hands in Indonesia

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. For a buyer, that settles who does what on a smart hands job: the customer owns the equipment and sets the objective, and a Reboot Monkey engineer does the work on it.

That position matters to a CTO or IT director weighing a provider for work in Indonesia. The customer keeps the choice of building. Reboot Monkey does not ask equipment to move into a facility it operates, because it operates none. The smart hands engineer arrives at the place where the equipment already stands, or where it is being installed.

Procurement managers usually want to know what sits behind a single visit. Behind each customer site there is a named engineer and a second, briefed engineer named as backup, which keeps the site from depending on one person. Behind the network work there is Reboot Monkey's own ordering of cross connects and carrier circuits, placed with the facility operator and the carriers present in the facility, with the cabling installed and patched by Reboot Monkey engineers in the customer's rack.

The same provider can also take the work that comes before and after a smart hands visit. New hardware can be installed through rack and stack, equipment can be moved through server migration, and retired hardware can be removed through decommissioning and ITAD. The customer does not have to brief a separate supplier at each stage of the hardware lifecycle.

The work stays inside what the facts support. Reboot Monkey engineers work on the customer's equipment and cabling. The building, its power and its cooling remain with the operator, and Reboot Monkey does not present them as part of the smart hands service.

How Reboot Monkey Works

These terms apply in every facility in Indonesia where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Smart Hands in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A business with equipment spread across several countries can therefore place requests for different sites through the same provider and the same way of working.

A request for another country is made the way it is for Indonesia: the work needed is stated in the request, Reboot Monkey scopes and quotes it, and a field engineer is dispatched to the customer's facility. Each country page applies that same flow to its own market.

For equipment in East Asia, a company that also runs hardware in Hong Kong can read about Smart Hands in Hong Kong. A team planning work in South Asia can look at Smart Hands in India, and a company with a footprint in Europe can use Smart Hands in Ireland to plan the same kind of visit there.

A multi-country project usually combines several of the services Reboot Monkey runs. A server migration may end with decommissioning of the old hardware in one country while rack and stack work begins in another. Each of those jobs is requested, scoped and quoted in the same way, and each is carried out by a field engineer dispatched to the customer's facility in the country concerned.

The same backup arrangement applies as well: a second, briefed engineer is named for every customer site, whichever country the site is in. A customer who adds a site later does not need to restart the conversation about who covers the job when the first engineer is unavailable.

The country pages above show the same service for each market. A customer who has already worked out the process for Indonesia has done most of the work for the next country.

Frequently Asked Questions

Smart Hands vs. Remote Hands | What's the Difference?

Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge, so the engineer works out the cause of a problem and decides how to fix it. Reboot Monkey offers both services, and a single request can involve either.

What does smart hands cover in Indonesia?

Smart hands covers technical work on the customer's servers and network equipment that needs diagnostic judgement and configuration knowledge, carried out by a Reboot Monkey field engineer dispatched to the customer's facility. It includes installing and patching cabling in the customer's rack. Rack and stack, server migration, decommissioning, ITAD and hardware monitoring are separate services that can be requested alongside it.

Do you provide on-site IT support in Indonesia data centers?

Yes. The customer sends a request naming the facility, the equipment and the work needed. Reboot Monkey scopes and quotes the job, then dispatches a field engineer to the customer's facility to carry it out. The work ranges from remote hands tasks to diagnostic and configuration work, and prices are quoted on request, depending on the customer and the size of the job.

Do you work in every datacenter in Indonesia?

Reboot Monkey engineers work in any facility in Indonesia where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Indonesia?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with smart hands in Indonesia?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Indonesia

Send the facility, the equipment and the work needed. Reboot Monkey scopes the job and quotes it.

Published:

Get a quote