Skip to content
Map of Malaysia: data centres as dots, the larger cities circled

Map: Natural Earth

Remote Hands

Data Center Remote Hands in Malaysia

Data center remote hands in Malaysia are physical tasks that Reboot Monkey engineers carry out on your instruction, at your own equipment inside the data center: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to your site.

  • 9

    of our services in Malaysia

Choose your city

In depth

Remote Hands: 7 sections, open any to read more.

Data Center Remote Hands in Malaysia: How It Works

Remote hands is the physical side of running equipment in a data center that the customer's own staff do not attend. Reboot Monkey defines it as physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. The tasks are physical and bounded, and each one acts on a single device or a single cable at the rack. In Malaysia, Reboot Monkey engineers are dispatched to the customer's site to carry out those tasks, while the customer's own team decides what needs to happen and when.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. Remote hands in Malaysia is therefore delivered inside a building whose operator is a different company, and every request is written around the customer's own equipment: a named server, a named port, a named component.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

The service suits a customer whose equipment is in a data center in Malaysia and whose own staff are elsewhere. The customer keeps ownership of the equipment and decides what is done to it. Reboot Monkey supplies the physical hands and, where the customer orders them, the network and rack space around that equipment. The division of work is simple: the customer's team directs, and the engineer performs.

A request for remote hands in Malaysia moves through two steps.

  • The customer states the task. The instruction names the device, its position in the rack and the physical action wanted. A reboot, a cable check, a component swap and a visual check each need different detail, so the instruction says what is to be done to which device rather than describing the symptom alone. When several devices are involved, the instruction lists them in the order the customer wants them handled.
  • A Reboot Monkey engineer is dispatched to the customer's site and carries out the instruction inside the data center, in person, at the equipment the instruction names. A request can be a single task or a planned sequence, for example a component swap followed by a visual check of the replaced part. Each task in the sequence is still a remote hands task, because each is a physical action on the customer's instruction, and the customer's team remains the party that decides what happens next.

Datacenter Landscape in Malaysia

Data centres in Malaysia, ordered by the number of networks present:

  • AIMS Kuala Lumpur (AIMS Data Centre Sdn Bhd), Ground Floor, Menara AIMS, Changkat Raja Chulan, Kuala Lumpur 50200: 103 networks; carriers SG.GS
  • CSF CX1 / TelcoHub1 Kuala Lumpur (CSF Group), CSF Building, Computer Exchange 1, Jalan Teknokrat 6, Cyberjaya 63000: 35 networks; carriers SG.GS
  • CX2 / MY01 Cyberjaya Malaysia (Bridge Data Centres), MY02, 7118 Jalan Impact, Cyberjaya 63000: 28 networks; carriers SG.GS
  • CJ1 CYBERJAYA (Mytelehaus), No.1, Jalan Cyber Point 4, Cyber 8, Cyberjaya 63000: 24 networks; carriers SG.GS
  • Equinix JH1 - Johor (Equinix, Inc.), No.2 & 6, Jalan Teknologi Perintis, 1/3, Taman Teknologi, Nusajaya, Iskandar Puteri 79200: 18 networks; carriers SG.GS
  • NTT Cyberjaya Data Center (CBJ) (NTT DATA's Global Data Centers division), 43000 Jalan APEC, Cyberjaya, Selangor Darul Ehsan, 63000: 15 networks; carriers SG.GS
  • Open DC JB1 - Menara MSC Cyberport (OPEN DC SDN BHD), Level 16, Menara MSC Cyberport, 5, Jalan Bukit Meldrum, Tanjung Puteri, Johor Bahru 80300: 15 networks
  • TM ONE KVDC, Cyberjaya (Telekom Malaysia Berhad (TM)), Lingkaran Teknokrat Timur, Cyberjaya 63000: 14 networks; carriers SG.GS
  • AIMS Cyberjaya (AIMS Data Centre Sdn Bhd), Jalan Teknokrat 1/2, Cyber 3, Cyberjaya 63000: 10 networks; carriers SG.GS
  • AIMS CJ1 Cyberjaya (AIMS Data Centre Sdn Bhd), Jalan Cyber Point 4, Cyber 8, Cyberjaya 63000: 7 networks; carriers SG.GS

Remote Hands by City

City pages for remote hands in Malaysia:

  • Cyberjaya: https://www.rebootmonkey.com/en/malaysia/cyberjaya/remote-hands/

Data Center Remote Hands in Malaysia: What We Deliver

On-site IT support in Malaysia data centers divides into two services in Reboot Monkey's terms. Remote hands is physical work on the customer's instruction. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. The difference is who supplies the judgement: in remote hands the customer decides what is wrong and what should be done, and the engineer performs it; in smart hands the engineer brings diagnostic judgement and configuration knowledge to the task. A customer who is unsure which applies can state the problem in the request, and the task then falls under whichever definition fits.

Two further services start from the same physical presence at the rack but are different work. Rack and stack is installing, mounting and cabling new hardware. Server migration is moving equipment between racks, rooms or facilities. A remote hands task acts on hardware that is already in place.

Cabling in the rack sits next to network supply. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A cable check on that cabling is a remote hands task like any other, requested the same way as a reboot or a component swap.

Remote hands in Malaysia covers the four kinds of physical task in the service definition. Each one is carried out by a Reboot Monkey engineer at the customer's equipment, on the customer's instruction, and each one has a clear end point: the task is done when the physical action has been performed.

  • Reboots. An engineer reboots the named device at the rack, on the customer's instruction. A reboot may be of a single unit or of several units handled in the order the customer sets. The reboot is a physical action at the device; any configuration change that should follow it is a different kind of work.
  • Cable checks. An engineer follows the named cable between the named points and checks the cable and its connectors physically. For fibre links, a fibre inspection scope and cleaning kit are available on request.
  • Component swaps. An engineer replaces the named component in the customer's equipment. The instruction identifies the component and the device it belongs to, and the swap is the whole of the task: the replacement of a part, not the diagnosis of why it failed.
  • Visual checks. An engineer looks at the named device, port or indicator in person. A visual check gives the customer a direct observation of equipment that a remote session cannot show.

Why Reboot Monkey for Data Center Remote Hands in Malaysia

Reboot Monkey does not host customer workloads and does not own the data centers it works in. That shapes what a remote hands request means: the customer's equipment, and the customer's choice of data center, stay the customer's, and Reboot Monkey acts on that equipment where it already stands. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. For an IT director responsible for several sites, each site therefore has its own named engineer and its own named backup, and the briefing applies to the backup as much as to the first engineer.

Prices are quoted on request and depend on the customer and the size of the job. For a procurement manager, that makes the scope the first thing to settle. Three decisions define it: which sites the work will take place at, which equipment is covered, and which kinds of task will be requested. A customer with a stable estate and occasional reboots has a different job size from one planning a hardware refresh, and the quote follows the job. A request that names the sites, the equipment and the kind of task gives Reboot Monkey what it needs to scope the work.

Hardware that has been serviced through remote hands eventually leaves service, and two further services cover that stage. Data center decommissioning is the removal and disposal of retired hardware. IT asset disposition (ITAD) comprises data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. Because resale or buyback is quoted case by case, the value of retired equipment is settled per job rather than in advance.

A hardware refresh shows how the services fit together. New hardware is installed under rack and stack, the old hardware is moved under server migration, remote hands covers individual physical tasks at the rack while the project runs, and the retired equipment is removed under data center decommissioning. Each step is requested and quoted as its own piece of work.

Hardware monitoring is the monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. It is a separate service from remote hands: the NOC watches the equipment, and remote hands is the physical work at the rack.

How Reboot Monkey Works

These terms apply in every facility in Malaysia where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Malaysia?

Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer is dispatched to the customer's site in Malaysia and performs the task at the equipment. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, and installing new hardware is rack and stack.

Do you provide on-site IT support in Malaysia data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's site in Malaysia and work on the customer's equipment inside the data center. The support ranges from physical tasks on instruction (remote hands) to technical work with diagnostic judgement (smart hands), rack and stack installations and server migrations. A request starts with the customer describing the device and the action wanted.

Do you work in every datacenter in Malaysia?

Reboot Monkey engineers work in any facility in Malaysia where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Malaysia?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with remote hands in Malaysia?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Data Center Remote Hands in Malaysia

Send the sites, the equipment and the tasks you need carried out, and Reboot Monkey will scope the job and quote it.

Published:

Get a quote