Skip to content
Map of New Zealand: data centres as dots, the larger cities circled

Map: Natural Earth

ITAD

ITAD in New Zealand

ITAD in New Zealand covers the collection and transport of retired IT hardware, data wiping or physical destruction of storage media, and resale or buyback of equipment that can be used again. Reboot Monkey engineers are dispatched to the customer's site or data centre, and each job is quoted on request.

  • 8

    of our services in New Zealand

In depth

ITAD: 7 sections, open any to read more.

ITAD in New Zealand: How It Works

A retirement project usually begins with a list of hardware and a decision about where that hardware will be processed. In New Zealand, Reboot Monkey handles the physical side of that project. Its engineers are dispatched to the customer's site or data centre, collect the retired hardware and transport it for processing. The customer decides which equipment is retired and how each item is treated.

The hardware in scope is the customer's IT hardware: servers, network equipment and the storage media inside them. The request starts with the customer's description of the job: which equipment is retiring, where it stands, and what should happen to the storage media inside it. The job is then scoped around how the storage media are treated, by wiping or by physical destruction, and around what happens to equipment that can be used again, which is the question of resale or buyback. Both are settled in the request, before any hardware is moved.

Resale and buyback are quoted case by case, so the value of one batch of retired equipment is not assumed for another. Equipment that cannot be used again is removed and disposed of as part of the same project.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network connectivity and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. ITAD sits at the end of that range, after hardware has been installed, run and replaced.

ITAD belongs with the other physical services Reboot Monkey runs inside data centres: remote hands, smart hands, rack and stack, server migration and data center decommissioning. Remote hands covers physical tasks carried out on the customer's instruction, and smart hands covers technical work that needs diagnostic judgement and configuration knowledge.

Each job is quoted on request, and the quote depends on the customer and the size of the job. A request is most useful when it states the following.

  • the site or data centre where the retired hardware stands
  • the types of equipment that are retiring
  • the treatment wanted for the storage media
  • whether resale or buyback of reusable equipment is wanted

Personal Data on Retired Drives in New Zealand

In New Zealand, personal data on retired drives falls under the Privacy Act 2020, overseen by the Office of the Privacy Commissioner. Retired servers, storage arrays and laptops keep their drives until someone deals with them, so the treatment of every storage device is settled before the hardware leaves the rack.

The drive is the unit that matters. A server can be reused, resold or scrapped, but the storage media inside it carry the data, so the treatment is stated for the media and not only for the machine. For a CTO, an IT Director or a procurement manager, the practical questions are operational: which devices hold personal data, whether each drive is wiped or physically destroyed, and where that happens.

ITAD covers both routes for storage media. The first is data wiping. The second is physical destruction, which on the customer's site is done by shredding or degaussing. Reboot Monkey staff carry out both.

The choice between wiping and destruction is made per job and stated in the request, before any hardware is collected. A customer that wants destruction on its own premises says so at that point, and the job is planned around the customer's site. A customer that wants the drives processed away from the site says that instead, and the hardware is collected and transported.

Hardware that is bought back is a separate question from the treatment of its drives, and the request names both so that the quote covers the buyback and the handling of the media.

Questions about how the Privacy Act 2020 applies to a particular set of data belong with the customer's own advisers and with the Office of the Privacy Commissioner. What Reboot Monkey takes on is the handling of the physical media: wiping or destruction, together with the collection and transport that move the hardware to processing.

For each group of devices, the request states:

  • the device type and where it stands
  • whether it holds personal data
  • the treatment wanted: wiping, or shredding or degaussing on the customer's site
  • whether the hardware is collected for processing or processed on the customer's site

How Collection and Destruction Work

A collection job in New Zealand runs in a set order, and each stage has its own scope.

Request and scope. The customer describes the equipment, where it stands and the treatment wanted for the storage media. That description fixes what is collected and how each item is handled afterwards, so the later stages follow from it.

Identification. Where equipment has to be matched to the customer's records before it leaves, asset inventory records it by serial number, asset tag and rack position, against the customer's asset list. Each physical unit is tied to a line in that list.

Removal and collection. Reboot Monkey engineers remove the retired hardware and collect it at the customer's site or data centre. This is the physical part of data center decommissioning, which is the removal and disposal of retired hardware.

Site rules. When the hardware stands in a data centre, the work follows the facility's rules. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Transport and processing. The collected hardware is transported for processing. Reboot Monkey staff carry out the processing in a partner's processing facility or on the customer's site, depending on the job. Data wiping belongs to this stage, and storage media can instead be destroyed on the customer's site by shredding or degaussing. The partner's processing facility is used when the customer wants the work done away from its own site.

Resale or buyback. Equipment that can be used again goes to resale or buyback, quoted case by case. When the customer wants the hardware bought back, the work is ordered as ITAD with buyback, which is IT asset disposition with the buyback of the retired hardware.

A retirement can also be a part of an installation. A set of servers replaced during a refresh leaves through ITAD while the rest of the rack stays in service, and the replacement hardware is installed through rack and stack, which is installing, mounting and cabling new hardware.

Why Reboot Monkey for ITAD in New Zealand

Reboot Monkey staffs ITAD itself. Collection is carried out by Reboot Monkey engineers dispatched to the customer's site or data centre, and processing is carried out by Reboot Monkey staff. The request is handled by one operator from the first description of the job to the collection of the hardware, so the party that quotes the project is the party that carries it out.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. That applies to a site where hardware is being retired in the same way as to a site where hardware is being installed or supported.

ITAD is the last step of a hardware lifecycle that Reboot Monkey's other services cover. Rack and network design settles the rack layout and the network topology of a new or expanding deployment, and ends with documentation of the design and a controlled handover. Hardware supply and spares provides data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request. Rack and stack puts the new hardware in place, and structured cabling installs, labels and patches the cabling between the customer's racks and network equipment. Server migration moves equipment between racks, rooms or facilities. The equipment that comes out of service then leaves through ITAD.

Equipment that comes out of service in other projects is retired hardware like any other. In a GPU or AI cluster, where the work is racking, cabling and node swaps, the customer can ask for a swapped-out node to be collected. After a server migration, the customer can ask for the equipment that is not moving to the new location to be handled the same way. In each case the request names the items and the treatment wanted for the storage media.

For a buyer, this means the end of one equipment generation can be planned alongside the start of the next. A refresh that brings in new servers and takes out old ones can be discussed as one project: what is supplied and racked, what is migrated, and what is retired and how its storage media are treated.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in New Zealand.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

IT Asset Disposition (ITAD) in Other Countries

For a customer whose retired hardware is not all in New Zealand, coverage matters. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A project can run in New Zealand alone or alongside other countries. In a project with several locations, each location is described in the request on its own: where the equipment stands, what it is, how its storage media are treated, and whether resale or buyback applies.

The stages of a single job then repeat at each location. Engineers are dispatched to the customer's site or data centre, the retired hardware is removed and collected there, and it is transported for processing. Reboot Monkey staff process it in a partner's processing facility or on the customer's site, and that choice can differ from one location to the next.

Asset inventory suits a project of this kind, because it records equipment by serial number, asset tag and rack position against the customer's asset list. A record kept for each location ties each unit to its site before collection begins.

Where a customer is leaving a location altogether, datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired.

Multi-site rollouts are one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. When the same customer later retires hardware at those sites, the site list from the programme is a starting point for the request.

Customers with hardware to retire in the Netherlands as well can start from IT Asset Disposition (ITAD) in Netherlands.

The reference to the Privacy Act 2020 applies to New Zealand only. A project in another country is scoped for that country.

Resale and buyback stay case by case in a multi-location project: the quote for the buyback of one location's hardware does not set the terms for another's.

Frequently Asked Questions

What does IT asset disposition cover in New Zealand?

In New Zealand, IT asset disposition covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. On the customer's site, storage media can be destroyed by shredding or degaussing.

Where does Reboot Monkey process retired hardware in New Zealand?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in New Zealand?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in New Zealand?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Request a Quote for ITAD in New Zealand

Describe the retired equipment, where it stands and the treatment wanted for the storage media. Each job is quoted on request.

Published:

Get a quote