Map: Natural Earth
Smart Hands
Smart Hands in New Zealand
Smart hands is technical work in the data center that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers are dispatched to the customer's facility in New Zealand and carry it out in the customer's racks, alongside installation, cabling and migration work.
8
of our services in New Zealand
Choose your city
Services in Smart Hands
- Smart Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- ITAD
- Remote Hands
- Server Migration
- Rack and Stackon request
In depth
Smart Hands: 8 sections, open any to read more.
Smart Hands in New Zealand: How It Works
Smart hands is technical work in the data center that needs diagnostic judgement and configuration knowledge. The engineer is expected to work out what is wrong, or what a setting should be, and then act on it, rather than repeat a step someone else has already decided. Reboot Monkey provides this work in New Zealand by dispatching engineers to the customer's facility, where they work on the customer's own servers and network equipment. Reboot Monkey is a third-party datacenter services operator: it works inside data centers that other companies own and run, it does not own datacenters, and it is not a hosting company.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Smart hands sits next to remote hands, and the two are separated by the judgement a task needs. Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands starts where a task cannot be reduced to a stated instruction, for example when a fault has to be diagnosed before anything is changed, or when a device has to be configured.
A request for smart hands in New Zealand moves through four steps. First, the customer describes the task, the equipment it concerns, the facility where the equipment sits and, where relevant, the rack position and the symptom or the change required. Second, Reboot Monkey scopes the job against that description. Prices are quoted on request and depend on the customer and the size of the job. Third, an engineer is dispatched to the customer's facility and carries out the work in the customer's racks, from diagnosis through to configuration. Any cabling the work involves is installed, labelled and patched in the customer's rack. Fourth, when the task belongs to a larger piece of work, such as a migration or a new deployment, it is scoped together with the installation and cabling around it.
Datacenter Landscape in New Zealand
Data centres in New Zealand, ordered by the number of networks present:
- DataCentre220 (Data Centre Limited), 220 Queen Street, Auckland Central, 1010: 96 networks; carriers Global Secure Layer, One New Zealand Ltd. and Vocus
- Data Vault Auckland Data Center (Data Vault Limited), 162 Grafton Road, Auckland 1010: 63 networks
- 2degrees Auckland - Albany, 7A Parkhead Place, Albany, Auckland 0632: 46 networks; carriers Falcore Australia Pty Ltd and Vocus
- Mayoral Drive Exchange (MDR) (Spark New Zealand Trading Limited), 31 Airedale Street, Auckland 1010: 41 networks; carriers Global Secure Layer
- Datacom - Orbit Data Centre (Auckland) (Datacom Data Centres Ltd), 6 Orbit Drive, Rosedale, Auckland 0632: 23 networks
- Chorus Mount Eden Exchange (MOD) (Chorus New Zealand Limited), 2B Poronui St, Mt Eden, Auckland 1024: 22 networks
- Datacom - Kapua Data Centre (Hamilton) (Datacom Data Centres Ltd), 14 Simsey Place, Hamilton 3200: 22 networks
- Spark Wellington Central (Featherston) (Spark New Zealand Trading Limited), 70 Featherston St, Wellington: 22 networks; carriers Global Secure Layer
- Xtreme Networks - Wellington DC (Xtreme Networks Limited), The Thorndon Centre, 191 Thorndon Quay, Wellington 6011: 20 networks; carriers Megaport
- Data Vault Hamilton Data Center (Data Vault Limited), 32 The Boulevard, Te Rapa Park, Hamilton 3200: 19 networks
Smart Hands by City
City pages for smart hands in New Zealand:
- Auckland: https://www.rebootmonkey.com/en/new-zealand/auckland/smart-hands/
Smart Hands in New Zealand: What We Deliver
Smart hands in New Zealand is delivered as on-site IT support in New Zealand data centers: Reboot Monkey engineers are dispatched to the customer's facility and work on the customer's equipment there. Diagnostic and configuration tasks are scoped one by one, and they can also sit inside a larger piece of work. Each service below has its own definition and scope, so a request names the service it belongs to as well as the task. These are the related services a smart hands request can be combined with.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
- Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover.
- Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
- GPU and AI cluster deployment: racking, cabling and node swaps.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
- Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
Why Reboot Monkey for Smart Hands in New Zealand
Smart hands is one part of a wider range of physical and network services. Reboot Monkey also sells rack space, IP transit, leased IP addresses, network and data-centre hardware, alongside the services that deliver, install and support them. A deployment in New Zealand can therefore draw on several of these services, and each one is scoped on its own terms.
IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. IPv4 addresses can be leased alone or together with IP transit and rack space under one agreement. A procurement manager comparing offers can see in each case what is being bought and how it is quoted.
Reboot Monkey sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. The company that orders the circuit is the company that patches it. A fibre inspection scope and cleaning kit are available on request for fibre work.
Recurring physical work can be agreed as remote hands retainers or as a block of hours, with terms agreed per customer and quoted on request. Hardware can be supplied through Reboot Monkey and then installed by its engineers, which keeps the purchase and the installation within one relationship.
For customers who want the infrastructure run for them, Reboot Monkey offers IT infrastructure turnkey and run. You or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. When equipment is retired, ITAD with buyback is IT asset disposition with the buyback of the retired hardware, quoted case by case.
How Reboot Monkey Works
These terms apply in every facility in New Zealand where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Smart Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Smart Hands in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer with equipment in New Zealand and in other countries can use the same services in each, from a single diagnostic task to a full deployment. A customer with equipment in the Netherlands as well can arrange the work through Smart Hands in Netherlands. In every country the first step is the same: the customer names the task, the equipment and the facility, and Reboot Monkey scopes the work from that description.
When the same work has to be done at several of the customer's sites, the multi-site rollouts service applies: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. A second, briefed Reboot Monkey engineer is named as backup for every customer site, including each site in a multi-site programme.
A move between locations is a separate kind of request. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. It is scoped as one job, so the move and the removal are planned together rather than as two unrelated tasks.
Where the customer's sites have to be linked, dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request. The cabling at the customer's rack end of those circuits is installed and patched by Reboot Monkey engineers, in the same way as any other cabling work in a facility.
Frequently Asked Questions
Smart Hands vs. Remote Hands | What's the Difference?
Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. The difference lies in the judgement the task requires: a stated physical step is remote hands, while a fault that must be diagnosed or a device that must be configured is smart hands.
What does smart hands cover in New Zealand?
In New Zealand, smart hands covers technical work in the customer's racks that needs diagnostic judgement and configuration knowledge. Related services scoped alongside it include rack and stack, server migration, structured cabling, rack and network design, asset inventory and GPU and AI cluster deployment. Each job is scoped from the customer's description of the task, and prices are quoted on request.
Do you provide on-site IT support in New Zealand data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's facility in New Zealand and carry out the work on the customer's servers, network equipment and cabling in the customer's racks. A request starts with the task, the equipment and the facility. Reboot Monkey scopes the job from that description, and an engineer then attends the site to do the work.
Do you work in every datacenter in New Zealand?
Reboot Monkey engineers work in any facility in New Zealand where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in New Zealand?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with smart hands in New Zealand?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.
Cities we cover in New Zealand
Request Smart Hands in New Zealand
Describe the task, the equipment and the facility, and Reboot Monkey will scope the job and quote it on request.