Map: Natural Earth
Remote Hands
Data Center Remote Hands in New Zealand
Data center remote hands in New Zealand is physical work on a customer's equipment, such as reboots, cable checks, component swaps and visual checks, carried out by Reboot Monkey engineers on the customer's instruction inside the data center that houses the equipment.
8
of our services in New Zealand
Choose your city
Services in Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- ITAD
- Server Migration
- Smart Hands
- Rack and Stackon request
In depth
Remote Hands: 8 sections, open any to read more.
Data Center Remote Hands in New Zealand: How It Works
Remote hands in New Zealand is physical work on the customer's own equipment, carried out on the customer's instruction by a Reboot Monkey engineer who is dispatched to the data center where that equipment is installed. The customer decides what needs to be done and sends the instruction, and the engineer carries it out at the rack. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company, and it does not own a data center.
The service is defined by the kind of task. Remote hands covers reboots, cable checks, component swaps and visual checks, and a request names the equipment, its position in the customer's rack and the action wanted. Where a task needs diagnostic judgement and configuration knowledge, it is smart hands work and is requested as such.
A reboot restarts the customer's equipment on the customer's instruction. A cable check is a physical check of the cabling at the customer's rack. A component swap replaces a part in the customer's equipment with a spare part. A visual check is an engineer inspecting the equipment at the rack by eye.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Anything that involves the building's power or cooling therefore stays with the operator, and Reboot Monkey engineers handle the equipment in the customer's rack.
A small task can show that more work is needed. A cable check may lead to re-patching, a component swap to a hardware replacement, or a visual check to a decommissioning request. Reboot Monkey offers each of those as a separate service with its own definition, so the customer raises the larger work as its own request.
Reboot Monkey works inside the data center the customer has chosen. The customer remains the owner of the equipment and the source of the instruction, and Reboot Monkey supplies the engineer who carries it out.
Datacenter Landscape in New Zealand
Data centres in New Zealand, ordered by the number of networks present:
- DataCentre220 (Data Centre Limited), 220 Queen Street, Auckland Central, 1010: 96 networks; carriers Global Secure Layer, One New Zealand Ltd. and Vocus
- Data Vault Auckland Data Center (Data Vault Limited), 162 Grafton Road, Auckland 1010: 63 networks
- 2degrees Auckland - Albany, 7A Parkhead Place, Albany, Auckland 0632: 46 networks; carriers Falcore Australia Pty Ltd and Vocus
- Mayoral Drive Exchange (MDR) (Spark New Zealand Trading Limited), 31 Airedale Street, Auckland 1010: 41 networks; carriers Global Secure Layer
- Datacom - Orbit Data Centre (Auckland) (Datacom Data Centres Ltd), 6 Orbit Drive, Rosedale, Auckland 0632: 23 networks
- Chorus Mount Eden Exchange (MOD) (Chorus New Zealand Limited), 2B Poronui St, Mt Eden, Auckland 1024: 22 networks
- Datacom - Kapua Data Centre (Hamilton) (Datacom Data Centres Ltd), 14 Simsey Place, Hamilton 3200: 22 networks
- Spark Wellington Central (Featherston) (Spark New Zealand Trading Limited), 70 Featherston St, Wellington: 22 networks; carriers Global Secure Layer
- Xtreme Networks - Wellington DC (Xtreme Networks Limited), The Thorndon Centre, 191 Thorndon Quay, Wellington 6011: 20 networks; carriers Megaport
- Data Vault Hamilton Data Center (Data Vault Limited), 32 The Boulevard, Te Rapa Park, Hamilton 3200: 19 networks
Remote Hands by City
City pages for remote hands in New Zealand:
- Auckland: https://www.rebootmonkey.com/en/new-zealand/auckland/remote-hands/
Data Center Remote Hands in New Zealand: What We Deliver
Customers who need on-site IT support in New Zealand data centers can draw on a set of physical services, all carried out by Reboot Monkey engineers at the customer's own racks. The services differ in the judgement they require and in the size of the job.
Smart hands and remote hands differ in what the engineer is asked to judge. In remote hands the customer has already decided what to do and the engineer performs it. In smart hands the engineer applies diagnostic judgement and configuration knowledge to reach a result.
Rack and stack applies to new hardware arriving in the data center, while server migration applies to equipment that already exists and is moving between racks, rooms or facilities.
For cable checks and cabling work on fibre links, a fibre inspection scope and cleaning kit are available on request.
Hardware can be supplied as well as installed. Hardware supply covers data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
An asset inventory is recorded against the customer's asset list, so the record shows the serial number, asset tag and rack position of each item the list names.
The physical services are:
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
- Cross-connects and carrier circuits: ordered from the facility operator and the carriers present in the facility, with Reboot Monkey engineers installing and patching the cabling in the customer's rack.
- Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
- Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover.
- Data center decommissioning: removing and disposing of retired hardware.
Why Reboot Monkey for Data Center Remote Hands in New Zealand
Reboot Monkey sells the network for the rack as well as the hands that work in it, so a connectivity order and the physical work that follows it are placed with the same supplier.
IP transit is offered as Economy, Premium and DDoS Premium plans. Each plan is quoted per data center for the capacity the customer needs, so a customer with equipment in more than one facility receives a quote for each facility rather than one figure for all of them.
IPv4 leasing covers leasing IPv4 addresses, alone or together with IP transit and rack space under one agreement. A customer who needs only addresses can lease only addresses, and a customer who also needs transit and rack space can place all three in the same agreement.
Rack space, IP transit and leased IP addresses can therefore be bought together, and a later remote hands request for the same rack is raised with the same supplier and carried out by a Reboot Monkey engineer.
Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request.
For recurring work, remote hands can be agreed as a retainer or as a block of hours, with terms agreed per customer and quoted on request. Retainers and hour blocks are therefore set up for each customer and not as a standard package. A customer with recurring work can therefore agree the terms once for that work. Prices are quoted on request and depend on the customer and the size of the job.
For GPU or AI clusters, the GPU and AI deployment package covers racking, cabling and node swaps.
IT infrastructure turnkey and run is the arrangement for customers who want the infrastructure bought, installed and run for them. You or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. Purchase, installation, configuration and running are therefore carried out by Reboot Monkey as one engagement for the customer. The choice of data center stays with the customer.
How Reboot Monkey Works
These terms apply in every facility in New Zealand where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Remote Hands in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer whose equipment is spread across several countries can place a request for each location with the same supplier. Remote hands means the same thing in every country: physical tasks carried out on the customer's instruction.
Teams that also run equipment in the Netherlands can request the same remote hands work through Remote Hands in Netherlands. A request there is raised in the same way as a request for New Zealand: the customer states the equipment, the rack and the task.
When the same installation is needed at several of the customer's sites, multi-site rollouts apply. They are one installation programme carried out at those sites by Reboot Monkey engineers, and the customer places the programme once rather than site by site. The request flow does not change with the number of sites: the customer sends the instruction and a Reboot Monkey engineer is dispatched to the data center concerned.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. The backup is named per site, so a customer with sites in several places has a named backup at each of them.
A multi-site programme and a data center exit are both work that spans locations: the first installs equipment at several sites, and the second moves equipment from one location to another. Datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. The move and the removal belong to one piece of work, so the equipment that travels and the equipment that is retired are dealt with together.
Retired hardware can leave a data center with its data handled. IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. It is processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. ITAD with buyback adds the buyback of the retired hardware and is quoted case by case.
Frequently Asked Questions
What does remote hands cover in New Zealand?
Remote hands covers physical tasks that Reboot Monkey engineers carry out on the customer's instruction at the customer's equipment: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing, mounting and cabling new hardware is rack and stack. Remote hands can also be agreed as a retainer or as a block of hours for recurring work.
Do you provide on-site IT support in New Zealand data centers?
Yes. For equipment in New Zealand data centers, Reboot Monkey engineers are dispatched to the data center where the customer's equipment sits and work at the customer's racks. Remote hands covers physical tasks on instruction, smart hands covers work that needs diagnostic judgement and configuration knowledge, and rack and stack, server migration and structured cabling are available as separate services.
Do you work in every datacenter in New Zealand?
Reboot Monkey engineers work in any facility in New Zealand where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in New Zealand?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with remote hands in New Zealand?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Cities we cover in New Zealand
Request Remote Hands in New Zealand
Describe the equipment, the rack and the task, and Reboot Monkey will quote the work.