Slovenia · Ljubljana
Remote Hands in Ljubljana
Remote Hands in Ljubljana means a Reboot Monkey field engineer carries out physical tasks in your rack on your instruction: reboots, cable checks, component swaps and visual checks. The same engineers provide on-site IT support in Ljubljana data centers for equipment you already run there.
In Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- ITADon request
Remote Hands
8
services detailed for Ljubljana
1
agreement for every city
Request remote hands for your Ljubljana racks
Tell Reboot Monkey which facility and which tasks are involved, and receive a quote based on that scope.
In depth
Remote Hands: 6 sections, open any to read more.
Remote Hands in Ljubljana
SIX SI Ljubljana Technology Park stands on Tehnološki park in Ljubljana. When your servers, switches or storage sit in a Ljubljana data center and your own staff are elsewhere, remote hands is the service that turns your instruction into a physical action in the rack. You tell Reboot Monkey what needs doing, and a field engineer does it and reports back what was done. Reboot Monkey is a third-party datacenter services operator. It does not own or run data centers and it is not a hosting company. That arrangement keeps the service independent of whichever building your equipment is in. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. For a customer with racks in several places, a request in Ljubljana is handled in the same way as a request anywhere else.
Datacenter Facilities in Ljubljana
Data centres in Ljubljana, ordered by the number of networks present:
- SIX SI Ljubljana Technology Park (Arnes), Tehnološki park 18, 1000 Ljubljana: 9 networks
- Telemach Tier3 DC (Telemach UG d.o.o.), Brnciceva 49, SI-1231 Ljubljana: 7 networks
- IT TEL Ljubljana (IT TEL d.o.o.), Tivolska Cesta 50, 1000 Ljubljana: 6 networks
- SIX SI Jozef Stefan Institute (Arnes), Jamova 39, 1000 Ljubljana: 4 networks
- Telekom Slovenije - DC Cigaletova (Telekom Slovenije d.d), Cigaletova ulica 10, 1000 Ljubljana: 3 networks; carriers EXA Infrastructure and Inter.link
- DC Vojkova 58 (MEGA M, d.o.o.), Vojkova cesta 58, 1000 LJubljana: 1 network
- Softnet Ljubljana DC, Tivolska cesta 50, 1000 Ljubljana: 1 network
Our Remote Hands Services
Remote hands covers physical tasks carried out on the customer's instruction. In practice that means the following work in your rack:
Where a task needs diagnostic judgement and configuration knowledge, it belongs to smart hands, a separate service. Where you need new hardware installed, mounted and cabled, that is rack and stack. Moving equipment between racks, rooms or facilities is server migration. Reboot Monkey keeps these definitions apart so that you know what you are ordering and what the engineer is expected to do.
Network work follows the same pattern. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack. A fibre inspection scope and cleaning kit are available on request, which matters when a link that should be up is dark and the cause is a dirty connector.
Retired equipment is handled by data center decommissioning, which removes and disposes of hardware, and by IT asset disposition (ITAD), which covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. Hardware monitoring is the monitoring of your servers and network equipment by the Reboot Monkey NOC, so a fault can be raised and then passed to an engineer for action on site.
- Reboots and power cycling of servers and network devices on your instruction
- Cable checks and re-seating of connections
- Component swaps, such as drives, memory or power supplies, using parts you supply
- Visual checks of equipment, including status lights and labels, reported back to you
Why Reboot Monkey
A request for remote hands usually arrives when something is already wrong, so the way the work is staffed matters as much as the task list. A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer is unavailable, the work does not wait for someone to be found and introduced to your environment.
Reboot Monkey sits between you and the facility. You do not need to build a relationship with each operator or each carrier to get a cross connect ordered, a cable patched or a faulty part replaced. One supplier takes the instruction and carries it through, while the operator keeps control of the building and its access rules.
Commercial terms are kept plain. Prices are quoted on request and depend on the customer and the size of the job. To start, tell Reboot Monkey which racks and which facility are involved and what kind of tasks you expect, and the quote is built around that scope.
How Reboot Monkey Works
These terms apply in every facility in Ljubljana where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Ljubljana?
Remote hands covers physical tasks that a Reboot Monkey field engineer carries out in your rack on your instruction: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement and configuration knowledge is smart hands, installing new hardware is rack and stack, and moving equipment is server migration. The facility operator keeps control of power, cooling and access.
Do you provide on-site IT support in Ljubljana data centers?
Yes. Reboot Monkey field engineers work on site in the customer's rack. They carry out physical tasks on your instruction, install and patch cabling, and replace components. Each customer site has a second, briefed engineer named as backup. The engineers work under the facility operator's site rules, and prices are quoted on request, depending on the customer and the size of the job.
Do you work in every datacenter in Ljubljana?
Reboot Monkey engineers work in any facility in Ljubljana where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Ljubljana?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with remote hands in Ljubljana?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Request remote hands for your Ljubljana racks
Tell Reboot Monkey which facility and which tasks are involved, and receive a quote based on that scope.