Skip to content

Zimbabwe · Harare

Rack and Stack in Harare

Rack and stack in Harare is the installation of new hardware in the customer's rack: mounting, cabling, labelling and power-on checks, carried out by Reboot Monkey engineers dispatched to the customer's facility. Reboot Monkey is a vendor-neutral third-party datacenter services operator, and quotes are on request.

Rack and Stack

  • 8

    services detailed for Harare

  • 1

    agreement for every city

Plan your rack and stack work in Harare

Describe the hardware and the rack it is going into, and Reboot Monkey will quote the job.

In depth

Rack and Stack: 6 sections, open any to read more.

Rack and Stack in Harare

Rack and stack means installing, mounting and cabling new hardware. For a business in Harare, Reboot Monkey carries out this work in the customer's rack.

The scope of a rack and stack job is cabling, labelling and power-on checks. The work is carried out by Reboot Monkey engineers. Engineers are dispatched to the customer's facility to mount the hardware, run and label the cables, and power the equipment on to check it.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, which makes rack and stack one service within a wider set that runs from delivery to support. It is not a hosting company and does not own data centres, so the rack space, the hardware and the network for the rack come from the same operator.

Rack and stack covers new hardware only. Equipment that already stands in a rack and has to move is server migration, and equipment that has to leave service is data center decommissioning. Anything else is quoted as its own service, so the scope of the job stays clear.

Datacenter Facilities in Harare

Data centres in Harare, ordered by the number of networks present:

  • Utande Internet Services, Level 9, Pegasus House, 54 Samora Machel Avenue, Harare

Our Rack and Stack Services

Rack and stack connects to the other physical services Reboot Monkey delivers in Harare, and each can be ordered with it. Reboot Monkey also sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Where the cabling is fibre, a fibre inspection scope and cleaning kit are available on request.

The services that sit next to rack and stack are defined as follows:

  • Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey

A rack and stack job is organised around the building it happens in. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Reboot Monkey's part is the hardware, the network order and the physical work on it; the building stays with the operator.

Reboot Monkey works as a vendor-neutral third-party operator, so the hardware it installs is whatever the customer has chosen or ordered through it.

A rack and stack request for Harare moves through these steps:

  • The customer describes the hardware to be installed and the rack it is going into.
  • Reboot Monkey quotes the job on request, based on the customer and the size of the job.
  • A second, briefed Reboot Monkey engineer is named as backup for every customer site, alongside the engineer assigned to the job.
  • After the power-on checks, the customer can add remote hands, smart hands or hardware monitoring for the same equipment.

How Reboot Monkey Works

These terms apply in every facility in Harare where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Harare?

Rack and stack in Harare covers installing, mounting and cabling new hardware. The work includes cabling, labelling and power-on checks. Reboot Monkey also orders cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. Quotes are on request and depend on the customer and the size of the job.

Do you work in every datacenter in Harare?

Reboot Monkey engineers work in any facility in Harare where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Harare?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with rack and stack in Harare?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Plan your rack and stack work in Harare

Describe the hardware and the rack it is going into, and Reboot Monkey will quote the job.

Published:

Get a quote