Zimbabwe · Harare
Remote Hands in Harare
Remote hands in Harare means physical tasks carried out on your instruction inside a data centre: reboots, cable checks, component swaps and visual checks. Reboot Monkey dispatches an engineer to your facility, who carries out the instructed task at your rack and reports back. Request a quote to scope the job.
In Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- ITADon request
Remote Hands
8
services detailed for Harare
1
agreement for every city
Scope a Remote Hands job in Harare
Send the task and the equipment concerned, and Reboot Monkey replies with a quote.
In depth
Remote Hands: 6 sections, open any to read more.
Remote Hands in Harare
Remote hands is the set of physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. For equipment in Harare, the customer states the task, and a Reboot Monkey engineer is dispatched to the customer's facility to carry it out at the rack.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and does not own datacenters.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A job is therefore scoped around what happens at the customer's rack: the instruction, the physical action and the result reported back to the customer. Where a task involves optical cabling, a fibre inspection scope and cleaning kit are available on request.
Work that needs diagnostic judgement or configuration knowledge is smart hands rather than remote hands, and the two are kept distinct so the instruction matches the work.
Datacenter Facilities in Harare
Data centres in Harare, ordered by the number of networks present:
- Utande Internet Services, Level 9, Pegasus House, 54 Samora Machel Avenue, Harare
Our Remote Hands Services
Remote hands is the entry point to a wider set of datacenter services. Reboot Monkey provides on-site IT support in Harare data centers through engineers who are dispatched to the customer's facility, and the same engineers can take on adjacent work as the need arises. The services available, in the terms Reboot Monkey uses for them:
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey
A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the first engineer is unavailable, the customer has a named person who already knows the job.
Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A Harare deployment can therefore combine connectivity, hardware and hands-on work through one supplier instead of several.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That experience comes from the same delivery model the customer receives: an instruction, an engineer at the rack and a reported result.
Prices are quoted on request and depend on the customer and the size of the job. To scope a Harare task, send the instruction and the equipment concerned through the contact form, and Reboot Monkey replies with a quote.
How Reboot Monkey Works
These terms apply in every facility in Harare where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Harare?
Remote hands covers physical tasks carried out at the customer's rack on the customer's instruction: reboots, cable checks, component swaps and visual checks. A fibre inspection scope and cleaning kit are available on request. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing new hardware is rack and stack.
Do you provide on-site IT support in Harare data centers?
Yes. A Reboot Monkey engineer is dispatched to the customer's facility to carry out the instructed work at the rack. That ranges from remote hands tasks to installing, mounting and cabling new hardware, moving equipment between racks, and removing retired hardware. The customer sends the request and the task, and Reboot Monkey quotes the job on request.
Do you work in every datacenter in Harare?
Reboot Monkey engineers work in any facility in Harare where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Harare?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with remote hands in Harare?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Scope a Remote Hands job in Harare
Send the task and the equipment concerned, and Reboot Monkey replies with a quote.