Skip to content

Zimbabwe · Harare

Smart Hands in Harare

Smart Hands in Harare means technical work inside a data centre that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers are dispatched to your facility to deliver on-site IT support in Harare data centers, and each job is quoted on request.

Smart Hands

  • 8

    services detailed for Harare

  • 1

    agreement for every city

Request Smart Hands in Harare

Describe the facility, the equipment and the task, and Reboot Monkey will quote the job on request.

In depth

Smart Hands: 6 sections, open any to read more.

Smart Hands in Harare

A smart hands request is the right choice when the task needs diagnostic judgement and configuration knowledge, not only a pair of hands at the rack. The practical question for a buyer is whether the work can be written down as an instruction or whether someone first has to work out what is wrong. Where the answer is the second, smart hands is the service to request.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. In Harare, smart hands is therefore work done in the facility where your equipment is housed, by Reboot Monkey engineers dispatched to that facility.

A request starts with the facility, the equipment involved and the fault or change. Describe the symptoms you have already seen, such as the alerts raised or the steps already tried, so the engineer starts from your findings and not from zero.

Datacenter Facilities in Harare

Data centres in Harare, ordered by the number of networks present:

  • Utande Internet Services, Level 9, Pegasus House, 54 Samora Machel Avenue, Harare

Our Smart Hands Services

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge. When a fault is not yet understood, or a change depends on how the equipment is configured, this is the service to request. Neighbouring services cover the other kinds of work in the rack, and each is defined by what the engineer does.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Smart hands tasks are therefore scoped to what an engineer can do on the equipment in the customer's rack.

  • Remote hands: physical tasks carried out on your instruction, such as reboots, cable checks, component swaps and visual checks.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case.
  • Hardware monitoring: monitoring of your servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey

Reboot Monkey sells the network for the rack as well as the hands that work on it. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A fibre inspection scope and cleaning kit are available on request.

Continuity is handled at the level of the customer site. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so the briefing on your equipment is held by two engineers and not one.

Each job is quoted on request, and the quote depends on the customer and the size of the job. Because one operator sells the rack space, IP transit, leased IP addresses and network, a single request can cover the hands work and the connectivity it depends on. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

How Reboot Monkey Works

These terms apply in every facility in Harare where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does smart hands cover in Harare?

Smart hands in Harare covers technical work that needs diagnostic judgement and configuration knowledge, carried out at your rack by a Reboot Monkey engineer dispatched to the facility. Physical tasks given as instructions, such as reboots or cable checks, are remote hands. Installing new hardware is rack and stack, and moving equipment between racks, rooms or facilities is server migration.

Do you provide on-site IT support in Harare data centers?

Yes. A request for on-site IT support is handled by a Reboot Monkey engineer dispatched to the customer's facility, who works on the equipment in the customer's rack. For network work, the engineer installs and patches the cabling in the rack, while the cross connects and carrier circuits are ordered from the facility operator and the carriers present. A request starts with the facility, the equipment and the task.

Do you work in every datacenter in Harare?

Reboot Monkey engineers work in any facility in Harare where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Harare?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.

How do I get started with smart hands in Harare?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Harare

Describe the facility, the equipment and the task, and Reboot Monkey will quote the job on request.

Published:

Get a quote