North Macedonia · Skopje
Remote Hands in Skopje
Remote hands in Skopje means a Reboot Monkey engineer carries out physical tasks in your rack on your instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey provides on-site IT support in Skopje data centers inside facilities that other companies own and run, so you do not need to send your own staff.
In Remote Hands
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
- ITADon request
Remote Hands
8
services detailed for Skopje
1
agreement for every city
Request Remote Hands in Skopje
Describe the task, the rack and the device, and Reboot Monkey will quote the job.
In depth
Remote Hands: 6 sections, open any to read more.
Remote Hands in Skopje
Neotel DC Skopje stands on Kuzman Josifovski Pitu in Skopje. When your servers and network equipment sit in a Skopje data center, the physical work on them still has to be done by someone who is on site. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network connectivity, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters.
Remote hands is the service for physical tasks carried out on your instruction. You decide what needs to happen and Reboot Monkey engineers perform it in your rack. Typical requests are a reboot of a frozen server, a check of a cable run, the swap of a failed component, or a visual check of the front panel and status lights of a device.
A request starts with your instruction. You describe the task, the rack and the device. The engineer carries it out and reports back when the work is finished, so you have a record of what was done on your equipment. Prices are quoted on request and depend on the customer and the size of the job.
Datacenter Facilities in Skopje
Data centres in Skopje, ordered by the number of networks present:
- Neotel DC Skopje (Neotel DOO export-import Skopje), Kuzman Josifovski Pitu 15, 1000 Skopje: 3 networks
- Faculty of Computer Science and Engineering (Faculty of Computer Science and Engineering, Ss. Cyril and Methodius University in Skopje), "Rugjer Boshkovikj" 16, P.O. Box 393, 1000 Skopje: 2 networks
- Telesmart DC Skopje (Telesmart Telekom doo), Bul. Kiro Gligorov 4, Bul. Nikola Parapunov bb, 1000 Skopje: 2 networks
- Ss. Cyril and Methodius University - Rectorate (Faculty of Computer Science and Engineering, Ss. Cyril and Methodius University in Skopje), blvd. Goce Delcev 9, 1000 Skopje: 1 network
Our Remote Hands Services
Remote hands is one service in a set that covers the life of a rack. Each one has its own scope, and it helps to place your task in the right one before you send a request. When the work needs diagnostic judgement and configuration knowledge, that is smart hands rather than remote hands. When new hardware has to be installed, mounted and cabled, that is rack and stack. Moving equipment between racks, rooms or facilities is server migration. Removing and disposing of retired hardware is data center decommissioning, and IT asset disposition covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. Monitoring of your servers and network equipment is done by the Reboot Monkey NOC as hardware monitoring. Connectivity is part of the same arrangement. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in your rack. If a link problem is suspected at the fibre level, a fibre inspection scope and cleaning kit are available on request.
- Remote hands: reboots, cable checks, component swaps and visual checks on your instruction
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge
- Rack and stack: installing, mounting and cabling new hardware
- Server migration: moving equipment between racks, rooms or facilities
Why Reboot Monkey
Reboot Monkey works for the customer whose equipment is in the rack, and it does not run the building. A second, briefed Reboot Monkey engineer is named as backup for every customer site. If the engineer you expect to see is unavailable, the person who covers the task already knows your site and the task they are being sent for. For a company with equipment in several countries, this means one provider can handle physical work across those sites rather than a different local contractor in each. For a CTO, IT director or procurement manager, the practical value is predictability. You know which service your task belongs to, you know who is named for your site, and you know the work is performed under the rules of the operator whose facility it is. Remote hands in Skopje follows the same method as the work done elsewhere, so a runbook you write once applies to every site.
How Reboot Monkey Works
These terms apply in every facility in Skopje where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does remote hands cover in Skopje?
Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing new hardware is rack and stack. Reboot Monkey engineers perform the tasks in the customer's rack under the facility operator's site rules.
Do you provide on-site IT support in Skopje data centers?
Yes. Reboot Monkey engineers carry out the work in the customer's rack inside the data center. A second, briefed engineer is named as backup for every customer site. Prices are quoted on request.
Do you work in every datacenter in Skopje?
Reboot Monkey engineers work in any facility in Skopje where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Skopje?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the city under one agreement.
How do I get started with remote hands in Skopje?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Request Remote Hands in Skopje
Describe the task, the rack and the device, and Reboot Monkey will quote the job.