Map: Natural Earth
Data Center Decommissioning
Data Center Decommissioning in Belgium
Data center decommissioning in Belgium is the removal and disposal of retired hardware: servers, switches, storage arrays, and their cabling and rail kits. Reboot Monkey engineers are dispatched to the customer's facility, record serial numbers, asset tags and rack positions against the customer's asset list, and log every item as it is removed.
9
of our services in Belgium
Choose your city
Services in Data Center Decommissioning
- Data Center Decommissioning
- Colocation
- Data Center Migration
- ITAD
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
In depth
Data Center Decommissioning: 7 sections, open any to read more.
Data Center Decommissioning in Belgium: How It Works
Data center decommissioning is the removal and disposal of retired hardware. For a CTO, IT director or procurement manager in Belgium, the work comes down to three decisions: which equipment leaves, when it leaves, and what happens to it afterwards. Reboot Monkey engineers are dispatched to the customer's facility in Belgium to carry out the physical work, and the sequence below applies to every request.
First contact sets the scope: which racks, rooms or cages are being emptied, what hardware is in them, and by when the space has to be handed back. The customer supplies the asset list, and the Reboot Monkey engineer assigned to the job matches it against what is installed. Serial numbers, asset tags and rack positions are recorded against the customer's asset list, so every device that leaves can be traced to a line the customer already holds. The job is defined by that list rather than by a general description of the room, which is why the same steps apply whether one rack or a larger footprint is being cleared. A list that carries a device type and an intended route for each line can be read straight against the removal log. Differences between the list and the racks are worth raising during scoping, because the log records what is physically removed, item by item.
The second step is the schedule. Removal is scheduled with the customer in advance, including any out-of-hours or weekend windows the facility requires. The window is agreed before an engineer is dispatched. Where the retirement follows a server migration, which moves equipment between racks, rooms or facilities, the migration is the first job and the decommissioning the second, and the two are scheduled with that order in mind.
The third step is the removal itself. A Reboot Monkey engineer works through the hardware item by item, identifying each device by its serial number, asset tag and rack position, and every item is logged as it is removed. The log is written during the work, so it is the record of what was taken out and the rack position it came from, set against the asset list the job began with. Decommissioning covers servers, switches, storage arrays, and their cabling and rail kits, so a rack is cleared of the devices and of the cabling and rails that belonged to them.
The fourth step is the decision on the retired hardware. It is worth settling when the request is raised, because it decides whether collection, transport and data handling belong to the job. Decommissioning covers the removal and disposal of retired hardware. Where the customer wants the hardware wiped, shredded, resold or bought back, that is the separate service of IT asset disposition, and it is named in the request alongside the decommissioning.
To open a request, the customer should have four things to hand: the asset list, the rack locations of the equipment, the date by which the space must be clear, and the intended route for the hardware once it is out. Reboot Monkey uses these details to scope the job and to agree the removal window. Once the window is agreed, the engineer assigned to the job holds the same list the customer holds, and the log of removal is built against it.
Datacenter Landscape in Belgium
Data centres in Belgium, ordered by the number of networks present:
- Digital Realty BRU1 - Brussels, Wezenbeekstraat 2, Zaventem, 1930 Brussels: 103 networks; carriers Arcadiz, Arelion, Eurofiber, LASOTEL, NL-ix and others
- LCL Brussels (Diegem) (LCL Belgium), Kouterveldstraat 13, Diegem, 1831 Brussels: 47 networks; carriers Arcadiz and Eurofiber
- Level(3) Brussels (Colt Technology Services Group), Leon Grosjeanlaan 2, 1140 Brussels: 21 networks; carriers Arelion, Colt Technology Services and Eurofiber
- antwerpdc (Datacenter United), Häifastraat 6, 2030 Antwerp: 17 networks; carriers Arcadiz and Eurofiber
- brusselsdc (Datacenter United), Excelsiorlaan 15, 1930 Zaventem: 16 networks; carriers Eurofiber and Free Pro
- Digital Realty BRU3 - Brussels, Mercuriusstraat 27, 1930 Zaventem: 15 networks; carriers Arcadiz
- LCL Antwerp (LCL Belgium), Noorderlaan 133, 2000 Antwerp: 15 networks; carriers Eurofiber and RETN
- Unix-Solutions DC Zaventem (Unix-Solutions BV), Hoge Wei 37, 1930 Zaventem: 13 networks; carriers Arcadiz
- WDC, Rue de la Metallurgie 17, 4530 Villers-le-Bouillet: 12 networks; carriers Arcadiz and Eurofiber
- LCL Wallonia One (LCL Belgium), Rue Guillaume Fouquet 14, 5032 Gembloux: 11 networks; carriers Arcadiz
Data Center Decommissioning by City
City pages for data center decommissioning in Belgium:
- Brussels: https://www.rebootmonkey.com/en/belgium/brussels/data-center-decommissioning/
Data Center Decommissioning in Belgium: What We Deliver
Decommissioning can sit alongside other physical datacenter work in the same project, and each neighbouring service has its own definition. Naming the services a job needs in the request gives the customer and the engineer the same wording for what is included.
A replacement project reads in a clear order. New hardware is installed through rack and stack, which is installing, mounting and cabling new hardware. Equipment that is relocating rather than retiring moves through server migration, which is moving equipment between racks, rooms or facilities. The retired hardware is then removed through decommissioning, and its onward route is carried out through IT asset disposition (ITAD). Where hardware is retired but not replaced, only decommissioning and ITAD are involved.
Each element of ITAD is a separate decision. ITAD is data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff. Each of these can be named in the request, and resale or buyback is quoted case by case rather than assumed in the decommissioning quote.
Smaller tasks around a removal belong to the hands services. Remote hands is physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks). Smart hands is technical work that needs diagnostic judgement and configuration knowledge. The customer states in the request which of the two a task needs, so the engineer arrives knowing whether the task is an instruction to follow or a problem to diagnose.
Hardware monitoring is a separate service from decommissioning: the Reboot Monkey NOC monitors the customer's servers and network equipment. A customer who has monitoring in place on hardware that is about to be retired should name that hardware in the request, so the asset list and the monitored equipment describe the same estate.
Cabling is the point where decommissioning meets connectivity. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When a rack is retired, its cabling and rail kits are part of the removal, and any connectivity that served the rack is something the customer should raise in the same request.
Each of these services is scoped in the request in the terms above. Work that falls outside the scope the request sets out is a separate line to be added, not an assumption made on the day of the job.
Why Reboot Monkey for Data Center Decommissioning in Belgium
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. For a decommissioning buyer, that makes the retirement of hardware one service in a range that also covers installation, migration and support, supplied by one operator.
A customer who has had equipment installed, migrated or monitored through Reboot Monkey can have the same operator retire it. A customer replacing the retired hardware can buy data-centre hardware from Reboot Monkey and have it delivered and installed by Reboot Monkey engineers through rack and stack.
Continuity is handled by naming people. A second, briefed Reboot Monkey engineer is named as backup for every customer site.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.
Prices are quoted on request and depend on the customer and the size of the job. A request that carries the asset list, the rack locations, the target date and the intended route for the hardware gives the quote what it depends on.
Each reader of the request asks a different question, and the way the job is run answers each. A CTO asks what left the rack and where it went: the log of removal, set against the asset list, answers the first half, and the route named in the request answers the second. An IT director asks when the work happens: the window agreed in advance. A procurement manager asks what the quote covers: the services named in the request and the size of the job.
How Reboot Monkey Works
These terms apply in every facility in Belgium where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does data center decommissioning cover in Belgium?
Data center decommissioning is the removal and disposal of retired hardware. In Belgium it covers servers, switches, storage arrays, and their cabling and rail kits. Serial numbers, asset tags and rack positions are recorded against the customer's asset list, and every item is logged as it is removed. Removal is scheduled with the customer in advance, including any out-of-hours or weekend windows the facility requires.
Do you work in every datacenter in Belgium?
Reboot Monkey engineers work in any facility in Belgium where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Belgium?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with data center decommissioning in Belgium?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center decommissioning work is scheduled under the operator's rules.
Cities we cover in Belgium
Request a data center decommissioning quote for Belgium
Send the asset list, the rack locations, the target date and the intended route for the hardware. Prices are quoted on request and depend on the customer and the size of the job.