Skip to content
Map of Belgium: data centres as dots, the larger cities circled

Map: Natural Earth

Smart Hands

Data Center Smart Hands in Belgium

Smart hands is technical work that needs diagnostic judgement and configuration knowledge. Reboot Monkey provides on-site IT support in Belgium data centers: engineers are dispatched to the customer's facility to carry out that work on the customer's instruction, on equipment the customer already runs.

  • 9

    of our services in Belgium

Choose your city

In depth

Smart Hands: 9 sections, open any to read more.

Data Center Smart Hands in Belgium: How It Works

Smart hands in Belgium is the technical, hands-on layer for equipment that a customer already houses in a Belgium data center. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters.

Smart hands is technical work that needs diagnostic judgement and configuration knowledge. That separates it from remote hands, which covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. The distinction shapes how a request should be written. If the task is a defined physical action, name the action and the device. If the outcome depends on diagnosing a fault or configuring a device, state the symptom, the expected end state and any change window your own team works to.

A request follows a plain sequence. The customer states the facility, the rack and the outcome required. Reboot Monkey engineers are dispatched to the customer's facility and carry out the work on the customer's instruction, which defines the scope of the job. The more precisely the instruction is written, the less an engineer has to interpret on site, and the easier it is for the customer's own team to compare what was done with what was asked.

The equipment, the rack positions and the workloads remain the customer's own; Reboot Monkey works on that estate and does not host it. Any change to the equipment, such as a swapped component or a new patch, is therefore a change to the customer's estate and belongs in the customer's own records.

Datacenter Landscape in Belgium

Data centres in Belgium, ordered by the number of networks present:

  • Digital Realty BRU1 - Brussels, Wezenbeekstraat 2, Zaventem, 1930 Brussels: 103 networks; carriers Arcadiz, Arelion, Eurofiber, LASOTEL, NL-ix and others
  • LCL Brussels (Diegem) (LCL Belgium), Kouterveldstraat 13, Diegem, 1831 Brussels: 47 networks; carriers Arcadiz and Eurofiber
  • Level(3) Brussels (Colt Technology Services Group), Leon Grosjeanlaan 2, 1140 Brussels: 21 networks; carriers Arelion, Colt Technology Services and Eurofiber
  • antwerpdc (Datacenter United), Häifastraat 6, 2030 Antwerp: 17 networks; carriers Arcadiz and Eurofiber
  • brusselsdc (Datacenter United), Excelsiorlaan 15, 1930 Zaventem: 16 networks; carriers Eurofiber and Free Pro
  • Digital Realty BRU3 - Brussels, Mercuriusstraat 27, 1930 Zaventem: 15 networks; carriers Arcadiz
  • LCL Antwerp (LCL Belgium), Noorderlaan 133, 2000 Antwerp: 15 networks; carriers Eurofiber and RETN
  • Unix-Solutions DC Zaventem (Unix-Solutions BV), Hoge Wei 37, 1930 Zaventem: 13 networks; carriers Arcadiz
  • WDC, Rue de la Metallurgie 17, 4530 Villers-le-Bouillet: 12 networks; carriers Arcadiz and Eurofiber
  • LCL Wallonia One (LCL Belgium), Rue Guillaume Fouquet 14, 5032 Gembloux: 11 networks; carriers Arcadiz

Smart Hands by City

City pages for smart hands in Belgium:

  • Brussels: https://www.rebootmonkey.com/en/belgium/brussels/smart-hands/

Data Center Smart Hands in Belgium: What We Deliver

A single smart hands job often crosses into a neighbouring service, so the full set of services Reboot Monkey delivers in Belgium data centers is relevant when you plan the work.

  • Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks).
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Rapid Response in Belgium

Speed in hands-on work depends on three things the buyer can influence: who is sent, how well that person knows the task, and how complete the request is. Reboot Monkey addresses the first two at site level. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a request for a Belgium site has a named engineer and a named backup behind it.

The third factor sits with the customer, and a short checklist removes most avoidable delay. A request that gives the facility, the rack, the identity of the device and the exact action leaves nothing to clarify before the engineer starts. For smart hands tasks, add the symptom observed, what has already been tried and the configuration state expected afterwards. For remote hands tasks, a clear statement of the device and the action is enough.

If you are unsure whether a job is a physical task or one that needs diagnosis, describe the symptom rather than the fix you expect. A precise symptom gives the engineer what is needed to apply diagnostic judgement, and it avoids sending an instruction that turns out to be the wrong remedy.

State whether the task is urgent or can be scheduled, and give the window if there is one. Urgent faults and planned changes are different kinds of request, and saying which one you are raising lets the engineer prepare accordingly.

For recurring tasks, share the standing procedure once. The named engineer and the backup can then work from the same document, and the customer's team does not need to repeat the background each time a request is raised.

Stronger Security in Belgium

Security in smart hands work is mostly a matter of control: who may touch which equipment, under which rules, on whose instruction. Three parties each hold part of it. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The customer decides what work is done and on which devices. Reboot Monkey carries out the instruction as given.

Because the instruction is the scope, its quality is the main security control the customer holds. A good instruction names the person who authorises the work, lists the devices involved and says which neighbouring equipment must not be touched. It also states the expected condition of the equipment when the job is finished. Changes to the scope should come from the customer in the same way as the original request, so that there is one written record of what was asked.

Reboot Monkey is not a hosting company, so the workloads run on the customer's own equipment and are not moved onto infrastructure that Reboot Monkey operates. Where a job involves retiring hardware, the devices fall under data center decommissioning and IT asset disposition, which Reboot Monkey staff process either in a partner's processing facility or on the customer's site.

Keep the written instruction with your change record. When the work is complete, your team can reconcile what was done against what was requested, and any difference is visible against a single document.

Why Reboot Monkey for Data Center Smart Hands in Belgium

The reason to place smart hands with Reboot Monkey is that the work sits next to the rest of the infrastructure order. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. The circuit and the person who patches it come from the same supplier.

Rack space, IP transit, leased IP addresses and data-centre hardware are also sold by Reboot Monkey. A customer who needs a technical task done on equipment ordered through Reboot Monkey deals with one organisation for the order and for the hands-on work.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That reach matters if the estate in Belgium is one part of a wider footprint and the same kind of hands-on support is needed elsewhere.

Prices are quoted on request and depend on the customer and the size of the job. To get a quote, send the facility, a description of the task and the timing you need, and the quote is based on that description.

How Reboot Monkey Works

These terms apply in every facility in Belgium where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What Services Do Smart Hands Provide?

Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, such as diagnosing a fault or configuring a device. Remote hands covers physical tasks on the customer's instruction, including reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers also handle rack and stack, server migration, decommissioning and ITAD.

What does smart hands cover in Belgium?

In Belgium, smart hands covers diagnostic and configuration work on the customer's own equipment, carried out by Reboot Monkey engineers dispatched to the customer's facility on the customer's instruction. It extends to the cabling in the customer's rack, which Reboot Monkey engineers install and patch, while cross connects and carrier circuits are ordered from the facility operator and the carriers present.

Do you provide on-site IT support in Belgium data centers?

Yes. A request starts with the customer naming the facility, the rack and the outcome required. A Reboot Monkey engineer is then dispatched to the customer's facility and does the work on the customer's instruction, whether it is a physical task or technical work that needs configuration knowledge. Hardware monitoring by the Reboot Monkey NOC is a separate service.

Do you work in every datacenter in Belgium?

Reboot Monkey engineers work in any facility in Belgium where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Belgium?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with smart hands in Belgium?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Belgium

Send the facility, a description of the task and the timing you need, and Reboot Monkey will respond with a quote.

Published:

Get a quote