Map: Natural Earth
Data Center Migration
Data Center Migration in Belgium
Data center migration in Belgium is the physical move of a customer's servers and network equipment between racks, rooms or facilities. Reboot Monkey engineers are dispatched to the customer's facility to disconnect, reconnect and test the equipment, or to work alongside the customer's own team, as agreed for each project.
9
of our services in Belgium
Choose your city
Services in Data Center Migration
In depth
Data Center Migration: 7 sections, open any to read more.
Data Center Migration in Belgium: How It Works
A data center migration in Belgium is a physical project. Equipment leaves one position and arrives at another, and every server, cable and circuit has to be disconnected at the source, reconnected at the destination and tested before the move counts as finished. Reboot Monkey delivers this work as server migration, which is moving equipment between racks, rooms or facilities. The work is carried out by Reboot Monkey field engineers, who are dispatched to the customer's facility in Belgium and work inside it.
The route of the move defines its scope. A move between racks, or between rooms, takes place inside one building. A move between facilities touches two buildings and the site rules of each. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The migration is therefore planned around the access arrangements of every building involved.
Three tasks make up the physical side of any move: disconnecting the equipment at its current position, reconnecting it at the new one, and testing it afterwards. Disconnecting means taking the cabling and circuits off the equipment. Reconnecting means cabling it again and patching it to the network. Testing means checking that the equipment works in its new position. Who does each of these tasks is agreed per project.
Reboot Monkey can run the whole physical move, or it can work alongside the customer's own team. In the first case the customer hands over the physical work and receives its equipment in the new position. In the second case the customer's engineers and Reboot Monkey engineers divide the three tasks between them, and the division is set for that project rather than fixed in advance. A customer can, for example, keep the testing with its own staff while Reboot Monkey handles the disconnecting and reconnecting.
A request for a migration in Belgium follows this sequence:
- The customer describes the move: which equipment is involved, where it sits now and where it is going.
- The customer and Reboot Monkey agree the working model: whether Reboot Monkey runs the whole physical move or works alongside the customer's team, and who disconnects, reconnects and tests.
- Any hardware installation, cabling or network orders that the destination needs are placed through the services that cover them.
- Reboot Monkey engineers are dispatched to the customer's facility and carry out their share of the move.
- Hardware that is retired at the source is handled through decommissioning or IT asset disposition, where the project includes it.
Datacenter Landscape in Belgium
Data centres in Belgium, ordered by the number of networks present:
- Digital Realty BRU1 - Brussels, Wezenbeekstraat 2, Zaventem, 1930 Brussels: 103 networks; carriers Arcadiz, Arelion, Eurofiber, LASOTEL, NL-ix and others
- LCL Brussels (Diegem) (LCL Belgium), Kouterveldstraat 13, Diegem, 1831 Brussels: 47 networks; carriers Arcadiz and Eurofiber
- Level(3) Brussels (Colt Technology Services Group), Leon Grosjeanlaan 2, 1140 Brussels: 21 networks; carriers Arelion, Colt Technology Services and Eurofiber
- antwerpdc (Datacenter United), Häifastraat 6, 2030 Antwerp: 17 networks; carriers Arcadiz and Eurofiber
- brusselsdc (Datacenter United), Excelsiorlaan 15, 1930 Zaventem: 16 networks; carriers Eurofiber and Free Pro
- Digital Realty BRU3 - Brussels, Mercuriusstraat 27, 1930 Zaventem: 15 networks; carriers Arcadiz
- LCL Antwerp (LCL Belgium), Noorderlaan 133, 2000 Antwerp: 15 networks; carriers Eurofiber and RETN
- Unix-Solutions DC Zaventem (Unix-Solutions BV), Hoge Wei 37, 1930 Zaventem: 13 networks; carriers Arcadiz
- WDC, Rue de la Metallurgie 17, 4530 Villers-le-Bouillet: 12 networks; carriers Arcadiz and Eurofiber
- LCL Wallonia One (LCL Belgium), Rue Guillaume Fouquet 14, 5032 Gembloux: 11 networks; carriers Arcadiz
Data Center Migration by City
City pages for data center migration in Belgium:
- Brussels: https://www.rebootmonkey.com/en/belgium/brussels/data-center-migration/
Data Center Migration in Belgium: What We Deliver
A migration project draws on the Reboot Monkey services below, and each project uses only the services its scope requires.
Server migration is the service at the core of the project: moving equipment between racks, rooms or facilities. It covers the physical movement of the customer's equipment from its current position to the new one, with the disconnecting, reconnecting and testing split as agreed for the project.
New hardware at the destination is rack and stack work: installing, mounting and cabling new hardware. A migration includes it when the destination needs additional or replacement hardware alongside the equipment being moved. It is scoped separately from the move, which keeps the installation of new hardware distinct from the relocation of existing equipment.
Equipment that arrives at a new position needs network there. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Reboot Monkey also sells IP transit and leased IP addresses, which a destination rack may need as part of the same project.
Two further services support the work around the move. Remote hands are physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks). Smart hands are technical work that needs diagnostic judgement and configuration knowledge. The difference lies in who supplies the judgement: with remote hands the customer's instruction does, with smart hands the engineer applies it.
At the source, equipment that does not move is retired. Data center decommissioning is the removal and disposal of retired hardware. IT asset disposition (ITAD) covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. It is all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. A migration that ends with an old room being emptied can therefore include the retirement of what is left behind.
Once the equipment is live in its new position, hardware monitoring applies: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. It becomes relevant after the physical work is finished.
A single project can combine several of these services: servers moved out of an old room, new hardware installed at the destination, connectivity ordered and patched, and the old hardware retired. The combination is set per project, and the customer's own team can take any part of it that it prefers to keep.
Why Reboot Monkey for Data Center Migration in Belgium
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters.
For a migration, this position has a practical effect on the work plan. The destination rack space, the IP transit or leased IP addresses it needs, the network for the rack and the engineers who carry out the move are all things Reboot Monkey supplies. A project plan can therefore cover the move and the capacity it lands in together.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. A migration between facilities involves a source site and a destination site, and each of them has its named backup. The project does not depend on a single person: if the first engineer is unavailable, the second one has already been briefed on the site.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. The same engineering model, with engineers dispatched to the customer's facility, applies wherever a project requires it.
Prices are quoted on request and depend on the customer and the size of the job. A request that names the equipment, the route of the move and the preferred division of work between Reboot Monkey and the customer's own team gives the quote its basis. A move of a few servers between racks and a relocation across several rooms are quoted as different jobs because the size of the job differs.
The customer decides how much of the move stays in-house. Reboot Monkey can run the whole physical move or work alongside the customer's own team, and the split of disconnecting, reconnecting and testing is agreed per project. The customer chooses the working model, and Reboot Monkey engineers carry out the part of the physical work assigned to them.
How Reboot Monkey Works
These terms apply in every facility in Belgium where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data Center Migration
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does data center migration cover in Belgium?
Data center migration in Belgium covers moving a customer's equipment between racks, rooms or facilities, carried out by Reboot Monkey engineers dispatched to the customer's facility. Reboot Monkey can run the whole physical move or work alongside the customer's own team, with disconnecting, reconnecting and testing agreed per project. Rack and stack, connectivity orders, decommissioning and ITAD can be part of the same project.
Do you work in every datacenter in Belgium?
Reboot Monkey engineers work in any facility in Belgium where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Belgium?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with data center migration in Belgium?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center migration work is scheduled under the operator's rules.
Cities we cover in Belgium
Plan your data center migration in Belgium
Describe the equipment, the route of the move and the working model you prefer. Prices are quoted on request and depend on the customer and the size of the job.