Skip to content
Map of Belgium: data centres as dots, the larger cities circled

Map: Natural Earth

Rack and Stack

Server Racking in Belgium

Server racking in Belgium is the installation of new hardware in a data centre: Reboot Monkey engineers install, mount and cable it in the customer's rack. The scope covers cabling, labelling and power-on checks, and quotes are on request. Reboot Monkey works inside data centres that other companies own and run.

  • 9

    of our services in Belgium

Choose your city

In depth

Rack and Stack: 7 sections, open any to read more.

Server Racking in Belgium: How It Works

Rack and stack is the installation of new hardware in a data centre: installing, mounting and cabling it in the customer's rack. A server racking job in Belgium begins when the customer tells Reboot Monkey what hardware is being installed, which data centre it is going into and what connectivity it needs once it is in place. The request is the working document for everything that follows.

Every rack and stack job in Belgium is carried out at the customer's facility, in the customer's rack. Reboot Monkey engineers are dispatched to that facility to do the work, and the request that opens the job is what the rest of it is planned from. From first contact to finished installation, a request moves through four steps.

A request for server racking in Belgium is most useful when it covers four points. The hardware is what is being installed. The destination is the data centre in Belgium and the customer's rack inside it. The cabling is what has to be connected to what within the rack. The connectivity is any cross connect or carrier circuit the installation needs. These four points map onto the rack and stack scope and onto the network Reboot Monkey sells for the rack, which makes them the natural basis for a quote.

The quote is the point at which the scope is set out. Procurement and IT teams can read the scope lines against their own installation plan before an engineer is dispatched, and the first contact is the right moment to raise anything in the plan that the scope does not mention.

Rack and stack covers hardware that is new to the facility. When a project also moves existing equipment between racks, rooms or facilities, that is server migration, and when it retires hardware, that is data center decommissioning. Both are separate Reboot Monkey services, and the request should name them so that each part of the project has its own scope and quote.

Each reader of a quote looks for something different. An IT director reads it to confirm what is being installed and in which rack, a CTO reads it for the connectivity the installation will depend on, and a procurement manager reads it for the scope and for what the quote depends on.

  • First contact. The customer sends the request to Reboot Monkey and describes the installation in its own terms: the hardware, the data centre in Belgium, the rack, the cabling and the connectivity. The description does not need to be exhaustive to start, because the quote is prepared from it.
  • Quote. Reboot Monkey answers the request with a quote. Prices are quoted on request and depend on the customer and the size of the job. The scope lines of the quote are what the customer checks against its own installation plan.
  • Installation. Reboot Monkey engineers are dispatched to the customer's facility, where they install, mount and cable the new hardware in the customer's rack.
  • Finish. Labelling and power-on checks complete the scope alongside the cabling.

Datacenter Landscape in Belgium

Data centres in Belgium, ordered by the number of networks present:

  • Digital Realty BRU1 - Brussels, Wezenbeekstraat 2, Zaventem, 1930 Brussels: 103 networks; carriers Arcadiz, Arelion, Eurofiber, LASOTEL, NL-ix and others
  • LCL Brussels (Diegem) (LCL Belgium), Kouterveldstraat 13, Diegem, 1831 Brussels: 47 networks; carriers Arcadiz and Eurofiber
  • Level(3) Brussels (Colt Technology Services Group), Leon Grosjeanlaan 2, 1140 Brussels: 21 networks; carriers Arelion, Colt Technology Services and Eurofiber
  • antwerpdc (Datacenter United), Häifastraat 6, 2030 Antwerp: 17 networks; carriers Arcadiz and Eurofiber
  • brusselsdc (Datacenter United), Excelsiorlaan 15, 1930 Zaventem: 16 networks; carriers Eurofiber and Free Pro
  • Digital Realty BRU3 - Brussels, Mercuriusstraat 27, 1930 Zaventem: 15 networks; carriers Arcadiz
  • LCL Antwerp (LCL Belgium), Noorderlaan 133, 2000 Antwerp: 15 networks; carriers Eurofiber and RETN
  • Unix-Solutions DC Zaventem (Unix-Solutions BV), Hoge Wei 37, 1930 Zaventem: 13 networks; carriers Arcadiz
  • WDC, Rue de la Metallurgie 17, 4530 Villers-le-Bouillet: 12 networks; carriers Arcadiz and Eurofiber
  • LCL Wallonia One (LCL Belgium), Rue Guillaume Fouquet 14, 5032 Gembloux: 11 networks; carriers Arcadiz

Rack and Stack by City

City pages for rack and stack in Belgium:

  • Brussels: https://www.rebootmonkey.com/en/belgium/brussels/rack-and-stack/

Server Racking in Belgium: What We Deliver

A rack and stack engagement in Belgium has a defined scope. Reboot Monkey engineers install, mount and cable new hardware in the customer's rack, and the work covers cabling, labelling and power-on checks. Quotes are on request.

Reboot Monkey sells the network for the rack, so a server racking job can include connectivity as well as cabling. A cross connect is a physical link made inside the facility between the customer's equipment and another network or party in the building, and a carrier circuit is a network service delivered to the facility by a carrier. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and from the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack. The order for the circuits and the patching of the cabling sit in the same request.

A fibre inspection scope and cleaning kit are available on request. A customer whose installation includes fibre cabling can ask for them when the request is made, alongside the rest of the scope.

The scope ends with hardware that is installed, cabled, labelled and checked. Technical work beyond that, the kind that needs diagnostic judgement and configuration knowledge, is a separate service from rack and stack and is requested separately from the installation.

Reboot Monkey sells data-centre hardware together with the services that deliver and install it, so a request can include the hardware as well as its installation.

When rack and stack quotes are compared, the useful comparison is by scope line: whether cabling, labelling and power-on checks are each included, and whether connectivity and fibre inspection are part of the request or ordered separately. A Reboot Monkey quote for Belgium is written against the scope of cabling, labelling and power-on checks, with connectivity and fibre tools added when the request asks for them.

  • Installing and mounting. Mounting is the physical step of fixing new hardware into the customer's rack, and installing is placing it there as part of the job. It comes first, because the cabling, the labelling and the power-on checks all depend on the hardware being in place. Reboot Monkey engineers carry it out in the customer's rack at the customer's facility.
  • Cabling. Reboot Monkey engineers install and patch the cabling in the customer's rack. This part of the scope connects the new hardware to the network that Reboot Monkey sells for the rack, and it follows from the connectivity named in the request.
  • Labelling. Labelling is part of the scope and is carried out alongside the cabling. Because it is a named part of the scope, it is a line the customer can read in the quote and check against its own requirements.
  • Power-on checks. Once the hardware is installed and cabled, power-on checks are carried out as part of the scope. The scope ends with hardware that has been powered on and checked.

Why Reboot Monkey for Server Racking in Belgium

Reboot Monkey is a third-party datacenter services operator. A hosting company sells hosted infrastructure that it runs itself, and a datacenter owner builds and runs the facility. Reboot Monkey is neither. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run.

Several parties take part in a rack and stack job, and each has a distinct part. The customer specifies the hardware and the rack it goes into. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The carriers present in the facility provide the carrier circuits. Reboot Monkey engineers install, mount, cable, label and check the hardware, and Reboot Monkey orders the connectivity the installation needs.

A second, briefed Reboot Monkey engineer is named as backup for every customer site. For a server racking job this means the engineer assigned to the installation is not the only person briefed on the site.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Rack and stack in Belgium is delivered as part of that field operation.

Installation is one of several physical and technical services Reboot Monkey delivers inside customer facilities. Remote hands are physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands are technical work that needs diagnostic judgement and configuration knowledge. Hardware monitoring is monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

A customer can therefore place the installation, the follow-on tasks and the monitoring with the same operator, and each is quoted on request.

How Reboot Monkey Works

These terms apply in every facility in Belgium where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does rack and stack cover in Belgium?

Rack and stack in Belgium covers installing, mounting and cabling new hardware in the customer's rack at the customer's facility. The scope includes cabling, labelling and power-on checks. Where the installation needs connectivity, Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present, and its engineers install and patch the cabling. Quotes are on request.

Do you work in every datacenter in Belgium?

Reboot Monkey engineers work in any facility in Belgium where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Belgium?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with rack and stack in Belgium?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Request a Rack and Stack Quote for Belgium

Describe the hardware, the destination data centre, the cabling and the connectivity. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote