Skip to content
Map of Belgium: data centres as dots, the larger cities circled

Map: Natural Earth

ITAD

ITAD in Belgium: IT Asset Disposition by Reboot Monkey

ITAD in Belgium covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing.

  • 9

    of our services in Belgium

In depth

ITAD: 7 sections, open any to read more.

ITAD in Belgium: How It Works

ITAD in Belgium is the end-of-life stage of a hardware estate: servers and network equipment that are no longer in service and have to leave the rack, the room or the building in a controlled way. Reboot Monkey handles this stage as a single request. The request covers collection and transport of the retired hardware, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. All of it is processed by Reboot Monkey staff, either on the customer's site or in a processing facility.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own data centres. For a buyer in Belgium this means ITAD is delivered as a service around the customer's own equipment, wherever that equipment currently stands.

ITAD belongs to a group of services that also includes remote hands, smart hands, rack and stack, server migration, data center decommissioning and hardware monitoring. Data center decommissioning is the removal and disposal of retired hardware. ITAD adds the data wiping or destruction, the collection and transport, and the resale or buyback. A project that empties a room can use both, and a customer that only needs retired equipment collected from its own site can request ITAD on its own.

Retired hardware does not all end the same way. Equipment that can be used again is a candidate for resale or buyback. Storage media are either wiped or destroyed physically, and on the customer's site the physical route is shredding or degaussing. Which route applies to which device is decided per request, and that decision starts with an accurate list of what is being retired.

A request to Reboot Monkey therefore names the hardware to be retired, the place where it stands, and the outcome wanted for each item, whether that is wiping, destruction, resale or buyback. With those answers the collection, the processing and the quote can be prepared.

Personal Data on Retired Drives in Belgium

In Belgium, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679), overseen by the Belgian Data Protection Authority. The fact that a drive is retired does not change this. Every disk, solid-state drive and other storage device in the retired equipment is therefore part of the ITAD request from the start, whether it is still installed in a server or has already been taken out of one. The customer's list of retired hardware is, in effect, also its list of storage media.

For the storage media, Reboot Monkey carries out data wiping or physical destruction. The customer chooses the route for each request. On the customer's site, physical destruction is done by shredding or degaussing, and the request states which of these methods is wanted. Where the media are not destroyed on site, they are collected, transported for processing and handled there by Reboot Monkey staff.

The method is the customer's decision. Questions about what the regulation requires for a given set of data are for the customer's own legal and data protection contacts. Reboot Monkey's part is the physical work that the request describes: collecting the hardware, transporting it, and wiping or destroying the storage media.

A request that lists the following keeps the handling of storage media unambiguous:

  • every device that contains storage media, whether it is installed in a server or already removed from one
  • the route wanted for each device: data wiping, or physical destruction by shredding or degaussing
  • the place where each device stands, which is also where on-site destruction would take place
  • the devices that can be used again and are therefore candidates for resale or buyback

How Collection and Destruction Work

Collection starts at the place where the hardware stands. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. Collection and transport are part of the ITAD service itself, so the request that names the hardware also covers its removal from the site.

Where the hardware stands in a data centre, the facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The request should therefore name the data centre and the rack or room, so that the collection can be planned around the access arrangements that apply there.

A second, briefed Reboot Monkey engineer is named as backup for every customer site, and that includes the site where retired hardware is collected or where storage media are destroyed.

Storage media can be destroyed physically on the customer's site, by shredding or degaussing. The work is carried out by Reboot Monkey staff at the place where the hardware was retired, and the request states which method is wanted for which media.

Hardware that is not destroyed on site is transported for processing off site. Reboot Monkey staff process it there. Retired hardware sometimes stands in a customer's own room and sometimes in a rack in a data centre that another company runs. The ITAD request has the same content in both cases, and only the access arrangements differ.

For each collection, the request should state:

  • which devices are leaving and where they stand
  • the data centre, rack or room, when the hardware is in a data centre
  • the method wanted for each storage medium: data wiping, shredding or degaussing
  • which equipment can be used again and is to be offered for resale or buyback

IT Asset Disposition Process Flow

An ITAD request in Belgium follows the order in which the hardware is handled.

First, the customer sends a request to Reboot Monkey that names the hardware being retired, the place where it stands and the outcome wanted for each item. Because resale or buyback is quoted case by case, the request also says which equipment can be used again and is to be offered, so that the value of that equipment is assessed for the job in question and not set in advance.

Second, Reboot Monkey collects the retired hardware at the customer's site or data centre. This is the step in which the hardware physically leaves the rack or the room.

Third, the hardware is transported for processing. Storage media that the customer has chosen to destroy on site are shredded or degaussed on the customer's site, and the rest of the equipment is transported.

Fourth, Reboot Monkey staff process the hardware, either on the customer's site or in a processing facility. This step includes the data wiping of storage media where the customer has chosen wiping and not physical destruction.

Fifth, the equipment that can be used again is handled through resale or buyback, which Reboot Monkey quotes case by case. The amount therefore follows from the equipment in each request.

Replacement hardware is a separate request. Installing, mounting and cabling new hardware is rack and stack, and the ITAD flow above deals only with the hardware that is leaving service. A customer that wants both can raise them together, with the retirement of the old equipment and the installation of the new described in one brief.

Throughout the flow the decisions that belong to the customer are the same: which hardware is retired, which method applies to the storage media, whether processing happens on site or off site, and which equipment is offered for resale or buyback. Reboot Monkey carries out collection, transport and processing on the basis of those decisions.

Why Reboot Monkey for ITAD in Belgium

Reboot Monkey delivers ITAD as one of the services it runs inside data centres that other companies own and run, and at customer sites. Rack and stack installs, mounts and cables new hardware, and ITAD handles the retired hardware that the new equipment replaces, so a customer refreshing equipment can raise both in the same conversation. Server migration and data center decommissioning sit in the same range of services.

The physical handling is done by Reboot Monkey staff. Reboot Monkey collects the retired hardware and transports it, and its staff process it on the customer's site or off site. The organisation that takes the hardware away is therefore the one that wipes or destroys the storage media and quotes the resale or buyback.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer whose hardware stands in other countries as well as in Belgium can raise those locations when making the request.

Reboot Monkey also sells the network for the rack. It orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A customer replacing retired equipment can therefore have the connectivity of the new rack handled by the same operator that retires the old hardware.

Prices are quoted on request and depend on the customer and the size of the job. A request that states the hardware, its location and the outcome wanted for each item gives Reboot Monkey what it needs to prepare that quote.

To start an ITAD request for Belgium, contact Reboot Monkey with the list of retired hardware, the place where it stands, the method wanted for the storage media and the equipment that may be offered for resale or buyback. Reboot Monkey then sets out how collection, transport and processing will be handled for that request.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in Belgium.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

Frequently Asked Questions

What does IT asset disposition cover in Belgium?

It covers collection and transport of retired hardware, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff process the hardware on the customer's site or off site, and on the customer's site storage media can be shredded or degaussed. In Belgium, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679).

Where does Reboot Monkey process retired hardware in Belgium?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in Belgium?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in Belgium?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Request ITAD in Belgium

Tell Reboot Monkey which hardware is being retired, where it stands and what outcome is wanted for each item.

Published:

Get a quote