Map: Natural Earth
Data Center Migration
Data Center Migration in Mexico
Data center migration in Mexico is the physical move of servers and network equipment between racks, rooms or facilities. Reboot Monkey engineers are dispatched to the customer's facility, can run the whole move or work alongside the customer's own team, and handle cabling, connectivity and retired hardware.
9
of our services in Mexico
Choose your city

Photo: Carlos Valenzuela · CC BY-SA 4.0 · source
Queretaro
- Data Center Migration
- Colocation
- Data Center Decommissioning
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
Services in Data Center Migration
In depth
Data Center Migration: 7 sections, open any to read more.
Data Center Migration in Mexico: How It Works
Data center migration in Mexico is the physical move of servers, network equipment and storage into, out of or within data centres that other companies own and run. Reboot Monkey is a third-party datacenter services operator. It is not a hosting company and not a datacenter owner, so every migration is planned around the customer's own equipment and the destination the customer has already chosen. Reboot Monkey engineers are dispatched to the customer's facility to carry out the work.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A move that touches two buildings therefore works under two sets of site rules, and the plan for the move has to fit both.
Server migration is moving equipment between racks, rooms or facilities. The three cases differ in distance but share one physical sequence: the equipment is disconnected, moved, reconnected and tested before it returns to service. A move between racks or rooms stays inside one building and one set of site rules. A move between facilities adds a second building and the journey between the two.
Reboot Monkey can run the whole physical move or work alongside the customer's own team; who disconnects, reconnects and tests the equipment is agreed per project. A customer whose own team keeps the testing step can hand over the disconnecting and reconnecting. A customer without a team available for the move can hand over all three steps. Either split is a valid project, provided it is agreed and not assumed.
The scope of a migration request is the physical layer: the equipment, the cabling and connections that serve it, and the removal of hardware that is retired. Keeping the scope there lets the request be described and quoted in terms of racks, rooms and cables, which are the things the engineers handle on the day.
Hardware that is not moving still belongs in the request. Retired hardware follows a different path from relocated hardware, and stating both at the start lets the quote cover the whole project and not only the move. A migration request is handled in the following steps.
- The customer describes the equipment to be moved, where it stands today and where it is going, including any hardware that is not moving and any new hardware arriving.
- The customer states which related work belongs to the project: new hardware to mount, new connectivity to order, retired hardware to remove or dispose of.
- Reboot Monkey prepares a quote for the job based on that description.
- The division of roles is confirmed with the customer's team and the move is scheduled.
- Reboot Monkey engineers are dispatched to the customer's facility and carry out their share of the move.
- The equipment is tested by whichever party was assigned that step before it returns to service.
Datacenter Landscape in Mexico
Data centres in Mexico, ordered by the number of networks present:
- KIO Querétaro 1 (QRO1), Privada de la Princesa 4, Parque Industrial el Marques, 76246: 69 networks; carriers Arelion, Cirion and EdgeUno
- Equinix MX1/MX2 - Mexico City (Equinix, Inc.), Carretera Estatal 431 Kilómetro 2+200, #79, Parque Tecnológico Innovación Querétaro, 76246 El Marques: 34 networks; carriers Arelion
- KIO México 5 (MEX5), Calle Benito Juárez 20 San Mateo Cuautepec, Fuentes del Valle, 54948 Tultitlan: 30 networks; carriers Arelion, Cirion and EdgeUno
- KIO México 2 (MEX2), Prolongacion Paseo de la Reforma 5396, La Rosita, El Yaqui, 05000 Cuajimalpa de Morelos: 25 networks; carriers Arelion and Cirion
- HostDime GDL Mexico Data Center, Avenida López Mateos Sur 2077, Col, Jardines Plaza del Sol, 44510 Guadalajara: 14 networks; carriers Arelion
- Ascenty QRO01 - Querétaro (Ascenty DataCenters e Telecom), Camino a Nativitas 800, 76295 Colón, Vesta Park Querétaro I, Queretaro: 13 networks; carriers Cirion and EdgeUno
- KIO México 1 (MEX1), Prolongacion Paseo de la Reforma 5287, La Rosita Lomas de Vista Hermosa, 05100 Cuajimalpa de Morelos: 12 networks; carriers EdgeUno
- KIO México 4 (MEX4), Blvd Magnocentro 6, Centro Urbano Interlomas, Interlomas, Villa de las Palmas, 52760 Huixquilucan: 12 networks
- Equinix MO1 - Monterrey (Equinix, Inc.), Parque Industrial Kalos de Alta Tecnología, Carretera Miguel Alemán Km 17, Street: 112 Aristoteles Avenue, 6660 Apodaca: 11 networks; carriers Arelion and Cirion
- Ascenty QRO02 - Querétaro (Ascenty DataCenters e Telecom), Carretera Estatal 100, km 17.5, Municipio Colón, 76270 Queretaro: 10 networks; carriers Cirion and EdgeUno
Data Center Migration by City
City pages for data center migration in Mexico:
- Queretaro: https://www.rebootmonkey.com/en/mexico/queretaro/data-center-migration/
Data Center Migration in Mexico: What We Deliver
Server migration is the core of a project, and the services below attach to it when the project needs them. Each is defined by the work it covers, so a request can name exactly which ones apply.
Connectivity is part of the same work. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A migration request that includes new circuits therefore covers the ordering and the patching together.
Rack and stack is installing, mounting and cabling new hardware. In a migration it applies when new or replacement hardware arrives at the destination and has to be mounted and cabled alongside the equipment that has moved.
Remote hands are physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. After a move they cover the checks and small physical corrections that equipment sometimes needs once it stands in its new rack. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. It applies when a problem found after the move needs more than a physical action, for example a configuration that has to be understood before it is corrected.
Data center decommissioning is removing and disposing of retired hardware. When a migration empties racks or a whole room, the hardware that is not moving can be removed and disposed of within the same project.
IT asset disposition (ITAD) covers data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. All of it is processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. It is the route for retired hardware that holds data which has to be dealt with before the hardware leaves the customer's hands.
Hardware monitoring is monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. It is a separate service from the move itself and can be requested for the equipment once it is installed in its new location.
Which services a project uses follows from what the project changes. A like-for-like move of equipment already in service needs the move and, where the destination is a new facility, the connectivity. A move that also upgrades hardware adds rack and stack. A move that closes a site adds decommissioning and, for hardware that holds data, IT asset disposition. Remote hands, smart hands and hardware monitoring apply once the equipment is running in its new place.
Why Reboot Monkey for Data Center Migration in Mexico
A migration involves three parties: the customer who owns the equipment, the facility operator, and the party that does the physical work. Reboot Monkey takes the third role, and only that role. It neither takes over the customer's workloads nor operates the building. The migration ends with the customer holding the same equipment in a new place, not with workloads moved onto Reboot Monkey infrastructure.
What can be bought in one engagement is wide: rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, all inside data centres that other companies own and run. For a procurement manager, a migration can be bought on its own, or as part of a destination that Reboot Monkey also supplies with space, addresses and network.
A second, briefed Reboot Monkey engineer is named as backup for every customer site, and a migration site is no exception. The engineer assigned to the move and the engineer named as backup are both briefed on the customer's site. Together with roles that are agreed per project, this means that on the day of the move the person responsible for each physical step is already known to the customer's team.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Engineers are dispatched to the facility where the customer's equipment stands, whether the job is a move between racks, between rooms or between facilities.
Prices are quoted on request and depend on the customer and the size of the job. For a migration, the quote is prepared from the description in the request: the equipment, the sites and the share of the work Reboot Monkey takes on. A request that states its related services at the start, such as new hardware, new circuits or retired hardware, receives a quote that covers the whole project.
How Reboot Monkey Works
These terms apply in every facility in Mexico where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data Center Migration
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does data center migration cover in Mexico?
Data center migration in Mexico covers the physical move of equipment between racks, rooms or facilities. Reboot Monkey can run the whole move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project. Related work, such as cabling, new hardware installation and removal of retired hardware, can be included in the same request.
Do you work in every datacenter in Mexico?
Reboot Monkey engineers work in any facility in Mexico where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Mexico?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with data center migration in Mexico?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center migration work is scheduled under the operator's rules.
Cities we cover in Mexico
Plan your data center migration in Mexico
Describe the equipment, where it stands today and where it is going. Reboot Monkey quotes the job on request.