Map: Natural Earth
Server Migration
Server Migration in Mexico
Server migration in Mexico is the physical movement of servers, storage and network equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project.
9
of our services in Mexico
Choose your city

Photo: Carlos Valenzuela · CC BY-SA 4.0 · source
Queretaro
- Server Migration
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Remote Hands
- Smart Hands
Services in Server Migration
In depth
Server Migration: 7 sections, open any to read more.
Server Migration in Mexico: How It Works
Server migration is the movement of equipment between racks, rooms or facilities. For a business in Mexico, that means servers, storage and network equipment are disconnected from one position, moved, then installed and cabled in another. The work is physical, and it is planned step by step so that every task has an owner on the day.
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. A migration therefore always takes place inside buildings that belong to someone else. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
A migration takes one of three shapes, and the shape decides how much has to be arranged beyond the move itself.
Connectivity needs attention in any move that ends in a different room or building, because a server that is mounted but not connected does not serve traffic. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Where a move ends in a new rack, rack space, IP transit and leased IP addresses are also part of what Reboot Monkey sells, so the destination can be requested together with the move.
A request starts with a description of the job. The details that shape the answer are what is moving, where each item stands today, where it has to end up, and which of the three shapes applies. It also helps to name the equipment that depends on other equipment, so that related items are scheduled together rather than separated. From that description the scope is set, the division of work is agreed, and a quote follows. Reboot Monkey engineers then carry out the physical work in the customer's facility.
- Rack to rack: equipment is taken out of its current rack and mounted in a different rack. The destination position has to be ready before the equipment leaves its current one, and the cabling is patched again once the equipment is in place.
- Room to room: equipment moves to another room. The equipment keeps its role, but its cabling has to be re-established at the new location and the connections tested before the move counts as finished.
- Facility to facility: equipment leaves one data centre and is installed in another. The destination needs rack space, network and cabling in place, and the move involves the operator of each building.
Datacenter Landscape in Mexico
Data centres in Mexico, ordered by the number of networks present:
- KIO Querétaro 1 (QRO1), Privada de la Princesa 4, Parque Industrial el Marques, 76246: 69 networks; carriers Arelion, Cirion and EdgeUno
- Equinix MX1/MX2 - Mexico City (Equinix, Inc.), Carretera Estatal 431 Kilómetro 2+200, #79, Parque Tecnológico Innovación Querétaro, 76246 El Marques: 34 networks; carriers Arelion
- KIO México 5 (MEX5), Calle Benito Juárez 20 San Mateo Cuautepec, Fuentes del Valle, 54948 Tultitlan: 30 networks; carriers Arelion, Cirion and EdgeUno
- KIO México 2 (MEX2), Prolongacion Paseo de la Reforma 5396, La Rosita, El Yaqui, 05000 Cuajimalpa de Morelos: 25 networks; carriers Arelion and Cirion
- HostDime GDL Mexico Data Center, Avenida López Mateos Sur 2077, Col, Jardines Plaza del Sol, 44510 Guadalajara: 14 networks; carriers Arelion
- Ascenty QRO01 - Querétaro (Ascenty DataCenters e Telecom), Camino a Nativitas 800, 76295 Colón, Vesta Park Querétaro I, Queretaro: 13 networks; carriers Cirion and EdgeUno
- KIO México 1 (MEX1), Prolongacion Paseo de la Reforma 5287, La Rosita Lomas de Vista Hermosa, 05100 Cuajimalpa de Morelos: 12 networks; carriers EdgeUno
- KIO México 4 (MEX4), Blvd Magnocentro 6, Centro Urbano Interlomas, Interlomas, Villa de las Palmas, 52760 Huixquilucan: 12 networks
- Equinix MO1 - Monterrey (Equinix, Inc.), Parque Industrial Kalos de Alta Tecnología, Carretera Miguel Alemán Km 17, Street: 112 Aristoteles Avenue, 6660 Apodaca: 11 networks; carriers Arelion and Cirion
- Ascenty QRO02 - Querétaro (Ascenty DataCenters e Telecom), Carretera Estatal 100, km 17.5, Municipio Colón, 76270 Queretaro: 10 networks; carriers Cirion and EdgeUno
Server Migration by City
City pages for server migration in Mexico:
- Queretaro: https://www.rebootmonkey.com/en/mexico/queretaro/server-migration/
Server Migration in Mexico: What We Deliver
The core deliverable is the physical move of equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside the customer's own team. Who disconnects, reconnects and tests the equipment is agreed per project, so each project has its own split of responsibilities rather than a fixed one.
The split matters because the three tasks are different in kind. Disconnecting is where the existing cabling is taken apart and the equipment is released from its rack. Reconnecting is where the equipment is mounted and cabled at the destination, with the network the customer has ordered. Testing is where the customer finds out whether the equipment behaves as it did before the move. A customer with its own infrastructure team can keep any of these three tasks and hand the others to Reboot Monkey, or hand over all three.
Around the move itself, Reboot Monkey delivers other services that a migration often needs. Each is defined on its own terms and is added only where the project calls for it.
Reading the list as a sequence helps with planning. Equipment that is retiring leaves through decommissioning or ITAD, equipment that is new arrives through rack and stack, and equipment that is moving is covered by the migration itself. Once a server is running in its new place, remote hands and smart hands are available for the tasks that come up, and hardware monitoring follows the servers and network equipment from the NOC. Which of these a project uses is settled when the scope is set.
Choosing between remote hands and smart hands follows the nature of the task. If the customer can say exactly what to do, such as reboot a server or check a cable, it is a remote hands task. If the task needs someone to diagnose before acting, or to apply configuration knowledge, it is smart hands work.
- Data center decommissioning: removing and disposing of retired hardware. It applies to equipment that stays behind at the source instead of travelling.
- Rack and stack: installing, mounting and cabling new hardware. It applies when the destination receives new equipment alongside the migrated servers.
- Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks). It applies after the move, for tasks the customer can describe precisely.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge. It applies when migrated equipment does not behave as expected at the destination.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. It applies once the equipment is running in its new position.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site. It applies to equipment that is retired rather than moved.
Why Reboot Monkey for Server Migration in Mexico
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That figure describes the company as a whole and is not a count of work in Mexico. For a migration, the practical point is that Reboot Monkey engineers work in the customer's facility, and in a move between facilities in each facility the move involves.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. The word briefed matters here: the second engineer is familiar with the site and the work, which is the condition for a backup to be of use in a project with a defined start and end.
Reboot Monkey does not host workloads. It moves, installs, connects and supports the customer's equipment inside buildings that other companies run, and that is the scope a migration request is measured against.
Prices are quoted on request and depend on the customer and the size of the job. For a migration, that makes the first conversation the place where the job is sized: the quantity and kind of equipment, the shape of the move, the services around it, and who does the disconnecting, reconnecting and testing.
When a migration quote from Reboot Monkey arrives, these are the points worth confirming against the job as the customer understands it:
- The split of responsibilities for disconnecting, reconnecting and testing, since this is agreed per project and differs between customers.
- The named backup engineer, who is set for every customer site involved in the move.
- How network at the destination is ordered, meaning the cross connects and carrier circuits, and who patches the cabling in the rack.
- Which related services (rack and stack, remote hands, smart hands, decommissioning, ITAD, hardware monitoring) are part of the scope and which are not.
- Whether equipment that is leaving service is handled in the same project as the equipment that is moving.
How Reboot Monkey Works
These terms apply in every facility in Mexico where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Server Migration
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does server migration cover in Mexico?
Server migration covers moving equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project. When the move ends in a new rack, Reboot Monkey orders the cross connects and carrier circuits, and its engineers install and patch the cabling.
Do you work in every datacenter in Mexico?
Reboot Monkey engineers work in any facility in Mexico where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Mexico?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with server migration in Mexico?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the server migration work is scheduled under the operator's rules.
Cities we cover in Mexico
Plan Your Server Migration in Mexico
Describe what is moving, where it stands today and where it has to end up, and Reboot Monkey will quote the job.