Skip to content
Map of Mexico: data centres as dots, the cities with a Reboot Monkey page highlighted: Queretaro

Map: Natural Earth

Remote Hands

Remote Hands in Mexico

Remote hands in Mexico means Reboot Monkey engineers carry out physical tasks on your instruction inside the data centre where your equipment sits: reboots, cable checks, component swaps and visual checks. It is on-site IT support in Mexico data centers, ordered from one provider.

  • 9

    of our services in Mexico

Choose your city

In depth

Remote Hands: 7 sections, open any to read more.

Remote Hands in Mexico: How It Works

Remote hands covers the work in a data centre deployment that only a person standing at the rack can do. Reboot Monkey defines it as physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. The customer decides what needs to happen, and the engineer performs it on the hardware in the rack. The instruction is the unit of work, which is why the way it is written matters more than anything else in the request.

A remote hands request in Mexico moves through these steps:

The customer sends an instruction that names the rack, the device and the action required.

Reboot Monkey assigns an engineer to the job and dispatches that engineer to the customer's facility.

The engineer works at the customer's rack and carries out the instruction as written.

The building belongs to someone else, and that shapes how the work is done. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. The customer does not need to arrange anything with the operator for the task itself. The engineer follows the operator's rules while carrying out the instruction.

A precise instruction keeps the task short and the result predictable. Remote hands is a service for tasks where the customer already knows the action. A good instruction therefore identifies the device by its label or position in the rack, states the port, slot or component involved, and says exactly what is to be done. It should also say what must be left untouched, so the engineer does not have to guess where the boundary of the task lies. If the instruction is ambiguous about the physical action, the engineer works to the wording the customer sent.

Tasks that start as a physical request can turn out to need more than that. A server that does not respond after a reboot, or a link that stays down after a cable check, may call for diagnosis. That belongs to a different service, smart hands, and the next section explains where the line falls. Separating the two at the start keeps each request scoped to the work it actually involves.

Prices are quoted on request and depend on the customer and the size of the job. A procurement manager can therefore ask for a quote against a defined task or a defined scope of recurring work, and compare it with the instruction in hand rather than with a generic tariff.

Datacenter Landscape in Mexico

Data centres in Mexico, ordered by the number of networks present:

  • KIO Querétaro 1 (QRO1), Privada de la Princesa 4, Parque Industrial el Marques, 76246: 69 networks; carriers Arelion, Cirion and EdgeUno
  • Equinix MX1/MX2 - Mexico City (Equinix, Inc.), Carretera Estatal 431 Kilómetro 2+200, #79, Parque Tecnológico Innovación Querétaro, 76246 El Marques: 34 networks; carriers Arelion
  • KIO México 5 (MEX5), Calle Benito Juárez 20 San Mateo Cuautepec, Fuentes del Valle, 54948 Tultitlan: 30 networks; carriers Arelion, Cirion and EdgeUno
  • KIO México 2 (MEX2), Prolongacion Paseo de la Reforma 5396, La Rosita, El Yaqui, 05000 Cuajimalpa de Morelos: 25 networks; carriers Arelion and Cirion
  • HostDime GDL Mexico Data Center, Avenida López Mateos Sur 2077, Col, Jardines Plaza del Sol, 44510 Guadalajara: 14 networks; carriers Arelion
  • Ascenty QRO01 - Querétaro (Ascenty DataCenters e Telecom), Camino a Nativitas 800, 76295 Colón, Vesta Park Querétaro I, Queretaro: 13 networks; carriers Cirion and EdgeUno
  • KIO México 1 (MEX1), Prolongacion Paseo de la Reforma 5287, La Rosita Lomas de Vista Hermosa, 05100 Cuajimalpa de Morelos: 12 networks; carriers EdgeUno
  • KIO México 4 (MEX4), Blvd Magnocentro 6, Centro Urbano Interlomas, Interlomas, Villa de las Palmas, 52760 Huixquilucan: 12 networks
  • Equinix MO1 - Monterrey (Equinix, Inc.), Parque Industrial Kalos de Alta Tecnología, Carretera Miguel Alemán Km 17, Street: 112 Aristoteles Avenue, 6660 Apodaca: 11 networks; carriers Arelion and Cirion
  • Ascenty QRO02 - Querétaro (Ascenty DataCenters e Telecom), Carretera Estatal 100, km 17.5, Municipio Colón, 76270 Queretaro: 10 networks; carriers Cirion and EdgeUno

Remote Hands by City

City pages for remote hands in Mexico:

  • Queretaro: https://www.rebootmonkey.com/en/mexico/queretaro/remote-hands/

Remote Hands in Mexico: What We Deliver

The core of the service is four kinds of physical task, each carried out at the customer's rack on instruction.

  • Reboots: a restart of a server or network device performed at the device itself, for the moment when the customer cannot reach it any other way.
  • Cable checks: looking at the cabling in the rack and confirming that it is seated and patched to the ports the instruction names.
  • Component swaps: replacing a component in the customer's hardware as the instruction directs.
  • Visual checks: looking at the equipment in the rack on the customer's behalf, so the customer knows its physical state without travelling to site.

Why Reboot Monkey for Remote Hands in Mexico

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own a datacenter. For a buyer this has a practical meaning: the party that sells the rack space, the network or the hardware is also the party whose engineers service them, so a remote hands request concerns equipment that sits within one commercial relationship.

The same engineers who handle a remote hands request handle the other work on the equipment's life cycle. Delivery and installation, support during operation, relocation and retirement are all services Reboot Monkey provides. A customer who starts with reboots and cable checks can later add rack and stack for new hardware, or server migration when equipment must move, without introducing a new supplier into the facility.

Continuity of cover is handled by naming a person in advance. A second, briefed Reboot Monkey engineer is named as backup for every customer site. The backup is briefed on the site, so an instruction does not depend on the availability of one individual. For an IT Director who has to explain to the business how an out-of-hours physical task will be carried out, this is a concrete answer to the question of who goes to the rack if the first engineer cannot.

Scale matters for customers whose footprint extends beyond a single country. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer with equipment in Mexico and in other countries can raise remote hands requests with one provider, and the same service definitions apply wherever the work is done.

The working model is kept deliberately plain. The customer states the task, an engineer is dispatched to the facility, and the work is done at the rack. The service definitions in this page are the ones Reboot Monkey uses in its operations, and a task that falls outside remote hands is moved to the service that matches it rather than stretched to fit. For a CTO weighing suppliers, that boundary is useful, because it shows what a request will and will not cover before any work is ordered.

A buyer who wants to place the first request can send the instruction, or a description of the recurring tasks expected, through the contact form. Reboot Monkey replies with a quote based on the customer and the size of the job, and the engineering work is then arranged against that scope.

How Reboot Monkey Works

These terms apply in every facility in Mexico where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Mexico?

Remote hands covers physical tasks carried out on the customer's instruction at the customer's rack in Mexico: reboots, cable checks, component swaps and visual checks. Work that needs diagnostic judgement and configuration knowledge falls under smart hands, and installing new hardware falls under rack and stack. The instruction defines the scope of each task.

Do you provide on-site IT support in Mexico data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility and work at the customer's rack, under the site rules of the facility operator. The customer sends an instruction, the engineer carries out the physical task, and anything needing diagnosis or configuration is handled as smart hands. Prices are quoted on request.

Do you work in every datacenter in Mexico?

Reboot Monkey engineers work in any facility in Mexico where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Mexico?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with remote hands in Mexico?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Remote Hands in Mexico

Send the instruction or the scope of recurring tasks, and Reboot Monkey will quote the work.

Published:

Get a quote