Skip to content
Map of Mexico: data centres as dots, the cities with a Reboot Monkey page highlighted: Queretaro

Map: Natural Earth

Smart Hands

Smart Hands in Mexico

Smart Hands in Mexico is on-site IT support in Mexico data centers: Reboot Monkey engineers are dispatched to the customer's facility to carry out technical work that needs diagnostic judgement and configuration knowledge, on the customer's own servers, network equipment and cabling.

  • 9

    of our services in Mexico

Choose your city

In depth

Smart Hands: 7 sections, open any to read more.

Smart Hands in Mexico: How It Works

Smart hands is technical work that needs diagnostic judgement and configuration knowledge. Remote hands is a different service: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. In Mexico the difference decides how a request is written. If the customer knows which action to take, the request is an instruction and belongs to remote hands. If the customer has a symptom and needs an engineer to find the cause on the equipment, the request is smart hands.

Reboot Monkey engineers are dispatched to the customer's facility in Mexico and work on the customer's own servers, network equipment and cabling. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A request for work on the building, its power or its cooling is therefore a matter for the operator, while a request for work on the customer's equipment is a smart hands request.

A smart hands request moves through five steps.

The more precisely a request describes the starting point, the less time the engineer spends on discovery. Useful details are the make and role of the device, the rack and its position, the error or behaviour observed, any recent change and the action already attempted. Where a task touches several systems, the request should say which one has priority.

The scope of smart hands is the customer's equipment inside the facility. Network capacity, IP transit and leased IPv4 addresses are separate services that Reboot Monkey also sells, and cross-connects and carrier circuits are ordered through the facility operator and the carriers present in the facility.

  • Request: the customer states the data center, the rack position, the equipment concerned and the symptom or change that needs attention. A note of what has already been tried lets the engineer begin with diagnosis instead of repetition.
  • Quotation: Prices are quoted on request and depend on the customer and the size of the job.
  • Assignment: Reboot Monkey assigns an engineer to the site. A second, briefed Reboot Monkey engineer is named as backup for every customer site.
  • Dispatch: the engineer is dispatched to the customer's facility and begins the diagnosis on the customer's equipment.
  • Work: where the task calls for it, the engineer changes configuration, swaps a component or re-patches cabling in the customer's rack.

Datacenter Landscape in Mexico

Data centres in Mexico, ordered by the number of networks present:

  • KIO Querétaro 1 (QRO1), Privada de la Princesa 4, Parque Industrial el Marques, 76246: 69 networks; carriers Arelion, Cirion and EdgeUno
  • Equinix MX1/MX2 - Mexico City (Equinix, Inc.), Carretera Estatal 431 Kilómetro 2+200, #79, Parque Tecnológico Innovación Querétaro, 76246 El Marques: 34 networks; carriers Arelion
  • KIO México 5 (MEX5), Calle Benito Juárez 20 San Mateo Cuautepec, Fuentes del Valle, 54948 Tultitlan: 30 networks; carriers Arelion, Cirion and EdgeUno
  • KIO México 2 (MEX2), Prolongacion Paseo de la Reforma 5396, La Rosita, El Yaqui, 05000 Cuajimalpa de Morelos: 25 networks; carriers Arelion and Cirion
  • HostDime GDL Mexico Data Center, Avenida López Mateos Sur 2077, Col, Jardines Plaza del Sol, 44510 Guadalajara: 14 networks; carriers Arelion
  • Ascenty QRO01 - Querétaro (Ascenty DataCenters e Telecom), Camino a Nativitas 800, 76295 Colón, Vesta Park Querétaro I, Queretaro: 13 networks; carriers Cirion and EdgeUno
  • KIO México 1 (MEX1), Prolongacion Paseo de la Reforma 5287, La Rosita Lomas de Vista Hermosa, 05100 Cuajimalpa de Morelos: 12 networks; carriers EdgeUno
  • KIO México 4 (MEX4), Blvd Magnocentro 6, Centro Urbano Interlomas, Interlomas, Villa de las Palmas, 52760 Huixquilucan: 12 networks
  • Equinix MO1 - Monterrey (Equinix, Inc.), Parque Industrial Kalos de Alta Tecnología, Carretera Miguel Alemán Km 17, Street: 112 Aristoteles Avenue, 6660 Apodaca: 11 networks; carriers Arelion and Cirion
  • Ascenty QRO02 - Querétaro (Ascenty DataCenters e Telecom), Carretera Estatal 100, km 17.5, Municipio Colón, 76270 Queretaro: 10 networks; carriers Cirion and EdgeUno

Smart Hands by City

City pages for smart hands in Mexico:

  • Queretaro: https://www.rebootmonkey.com/en/mexico/queretaro/smart-hands/

Smart Hands in Mexico: What We Deliver

Smart hands is rarely the only work in a deployment. The services below are delivered by Reboot Monkey engineers in the customer's facility and can be requested alongside or after a smart hands job, each in the terms in which it is defined.

A typical sequence shows how they fit together. A server that fails in its rack is diagnosed as a smart hands task and the faulty component is swapped. Where spares are kept in the customer's rack on request, the replacement part is taken from there. If the fault traces to a patch lead, the engineer re-patches the cabling between the customer's racks and network equipment.

Fibre links have their own tools. A fibre inspection scope and cleaning kit are available on request for work on fibre connections.

When equipment leaves the facility, datacenter exit and relocation is the physical move of the customer's equipment to its new location together with the removal and disposal of the hardware that is retired. Data center decommissioning is the removal and disposal of retired hardware on its own.

  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Structured cabling: installing, labelling and patching the cabling between the customer's racks and network equipment.
  • Cross-connects and carrier circuits: ordered from the facility operator and the carriers present in the facility, with Reboot Monkey engineers installing and patching the cabling in the customer's rack.
  • Rack and network design: the rack layout and the network topology of a new or expanding deployment, ending with documentation of the design and a controlled handover.
  • Asset inventory: recording the customer's equipment in the data center by serial number, asset tag and rack position, against the customer's asset list.
  • GPU and AI cluster deployment: racking, cabling and node swaps.
  • Hardware supply and spares: supply of data-centre hardware, servers, network equipment and spare parts, with spares kept in the customer's rack on request.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey for Smart Hands in Mexico

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and it is not a datacenter owner. For a buyer in Mexico this means smart hands sits next to the services that put equipment in the rack in the first place.

IP transit is offered as Economy, Premium and DDoS Premium plans, each quoted per data center for the capacity the customer needs. IPv4 addresses can be leased alone or together with IP transit and rack space under one agreement. Dark fibre between data centres and wavelength circuits are ordered from the carriers and quoted on request. All of these can be bought alongside smart hands.

For customers who prefer not to buy and run hardware themselves, IT infrastructure turnkey and run works as follows: you or your investors fund the IT infrastructure. Reboot Monkey buys, installs, configures and then runs it for you, inside the data center you choose. The data center itself stays with its operator. In that model the customer decides the data center and the scope, and Reboot Monkey carries the purchasing, installation, configuration and day-to-day running.

Recurring work is covered by remote hands retainers and hour blocks: remote hands agreed as a retainer or as a block of hours for recurring work, with terms agreed per customer and quoted on request.

Customers with equipment at more than one site can use multi-site rollouts: one installation programme carried out at several of the customer's sites by Reboot Monkey engineers. A deployment in Mexico can be one of those sites. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

When a request is scoped, three questions decide which service applies. Does the task need the engineer to diagnose or configure, or only to carry out a stated action? Does it involve new equipment, which is rack and stack, or equipment already in place? Is it a single job, or recurring work that suits a retainer or a block of hours?

How Reboot Monkey Works

These terms apply in every facility in Mexico where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What Services Do Smart Hands Provide?

Smart hands is technical work that needs diagnostic judgement and configuration knowledge, carried out by a Reboot Monkey engineer on the customer's equipment inside the data center. Typical tasks are fault diagnosis, configuration changes, component swaps, re-patching cabling in the customer's rack and installing new hardware through rack and stack.

What does smart hands cover in Mexico?

In Mexico, smart hands covers technical work on the customer's own servers, network equipment and cabling inside the facility where that equipment stands. Reboot Monkey engineers are dispatched to the facility for diagnosis, configuration changes and component swaps. Rack and stack, structured cabling, server migration and equipment inventory by serial number, asset tag and rack position are available as separate services for the same site.

Do you provide on-site IT support in Mexico data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility in Mexico to provide on-site IT support on the customer's equipment: diagnosis, configuration work, component swaps, cabling and hardware installation. A request names the data center, the equipment concerned and the task, and the job is quoted on request.

Do you work in every datacenter in Mexico?

Reboot Monkey engineers work in any facility in Mexico where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Mexico?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with smart hands in Mexico?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Mexico

Describe the data center, the equipment and the task, and Reboot Monkey will quote the job.

Published:

Get a quote