Skip to content
Map of Mexico: data centres as dots, the cities with a Reboot Monkey page highlighted: Queretaro

Map: Natural Earth

ITAD

ITAD in Mexico: IT Asset Disposition

ITAD in Mexico is the end-of-life handling of retired IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey carries it out at the customer's site or data centre.

  • 9

    of our services in Mexico

In depth

ITAD: 7 sections, open any to read more.

ITAD in Mexico: How It Works

IT asset disposition (ITAD) is the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. In Mexico, Reboot Monkey delivers it as a physical service at the customer's own site or data centre. The work is processed by Reboot Monkey staff, either in a partner's processing facility or on the customer's site.

A request begins with a description of what is being retired. The details that matter are where the hardware stands, which kinds of equipment are involved, and what should happen to the storage media in each device. The hardware can be anything that holds data or is being withdrawn from service, such as servers, storage arrays and network equipment. From that description Reboot Monkey splits the job into its parts: collection and transport of the hardware, treatment of the drives, and the question of whether any equipment can be resold or bought back. Each part can be scoped on its own, because one customer may want some drives shredded on site and other equipment taken away for processing.

ITAD can be ordered alone or together with other physical services. Server migration moves equipment between racks, rooms or facilities, and rack and stack installs, mounts and cables new hardware. A customer replacing old equipment with new can describe the retired side of that project as an ITAD request, and the new side as rack and stack or server migration work. These are separate services under one operator, and a request can name one or several of them.

Mexico adds two legal reference points to an ITAD job, one for electronic waste and one for personal data on retired drives, and a request should be written with both in mind.

Three decisions therefore shape every job:

  • Which hardware leaves the site, and from which rooms, racks or locations it is collected.
  • Whether each storage device is wiped or physically destroyed by shredding or degaussing.
  • Whether any equipment is a candidate for resale or buyback, which is quoted case by case.

E-waste Rules in Mexico

In Mexico, electronic waste falls under the Official Standard NOM-161-SEMARNAT-2011. Retired servers, storage arrays, switches and similar electronic equipment are the kind of hardware an ITAD job removes from a data centre or other customer site, so this is the standard to name in a request when the scope is written.

Reboot Monkey's ITAD scope divides retired hardware into two streams. Equipment that can be used again is considered for resale or buyback. Equipment that cannot be used again is disposed of as part of the same job. The split is made per item, not per project. In both streams the storage media are handled by data wiping or by physical destruction, and the customer states which of the two applies to each type of device.

Which stream a given item belongs to is not settled when the request is written. It is established case by case, and the resale or buyback quote follows from it. For that reason a request is better written by equipment type than as a single total, and items the customer wants to keep are named in the request and left out of the collection list.

Collection and transport are part of the ITAD service. Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. Processing is carried out by Reboot Monkey staff in a partner's processing facility, or on the customer's site where the storage media are destroyed there.

A retirement project can take several shapes, and the scope follows the shape. For a full exit from a data centre, ITAD runs alongside data center decommissioning. For a hardware refresh, only the replaced equipment is collected, and the new equipment goes in through rack and stack. For a clear-out of a single room, the scope names that room and nothing else.

A request for the waste side of a retirement project should state:

  • the types of equipment to be retired and the locations they are collected from
  • the items the customer expects to be reusable, to be confirmed case by case
  • the storage devices to be wiped and those to be shredded or degaussed

Personal Data on Retired Drives in Mexico

In Mexico, personal data on retired drives falls under the Federal Law for the Protection of Personal Data in Possession of Private Parties of 2025, overseen by the Secretaría Anticorrupción y Buen Gobierno. A drive taken out of a server or storage array can still hold records about customers, employees or suppliers, so the end of a drive's life is the point at which this law matters to an ITAD job.

The ITAD service offers two ways to deal with a retired drive. Data wiping is processed by Reboot Monkey staff, in a partner's processing facility or on the customer's site. Physical destruction takes place on the customer's site, where storage media can be destroyed by shredding or degaussing. Both shredding and degaussing are carried out there, so the drive is destroyed before any transport leg for that drive begins.

The choice belongs to the customer and can differ within one job. Drives that leave with their host equipment for resale or buyback can be wiped. Drives the customer does not want to leave its premises can be destroyed where they stand. The two routes can sit side by side in one request, with the equipment list marking which drives take which route.

Storage media can sit inside complete systems or be held as loose spares. A request should say which, so that every drive in scope is accounted for under the route chosen. Drives that are not destroyed on site are collected and transported for processing, and the request should identify them before collection, not after.

What the law and the waste standard require of the customer as the holder of the data and the owner of the equipment is for the customer's own legal staff to confirm. Reboot Monkey's part is the physical handling of the media, and it does not advise on how the customer classifies its data. A request for ITAD does not by itself settle the customer's obligations under either text.

For each group of drives, the request names:

  • the equipment the drives sit in, or the fact that they are loose spares
  • the location they are collected from
  • the route: data wiping, shredding or degaussing

How Collection and Destruction Work

An ITAD request in Mexico runs in the following order, from first contact to finished work. The flow is the same whether the job is a single room or a full data centre exit; only the scope changes.

First, the customer sends the request to Reboot Monkey. It describes the hardware to be retired, where it stands, and which route applies to the storage media in each device.

Second, Reboot Monkey scopes the job into collection and transport, data wiping or physical destruction, and resale or buyback. Prices are quoted on request and depend on the customer and the size of the job.

Third, Reboot Monkey engineers are dispatched to the customer's site or data centre for the collection. A second, briefed Reboot Monkey engineer is named as backup for every customer site.

Fourth, the work follows the building's rules. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Fifth, the engineers collect the retired hardware. Where the customer has chosen physical destruction, the storage media are shredded or degaussed on the customer's site.

Sixth, the remaining hardware is transported for processing, where data wiping is carried out for the drives that were not destroyed.

Seventh, equipment that can be used again goes to resale or buyback.

Two details help the visit: the request should name the facility and the contacts who can authorise entry and removal of equipment, and equipment leaving a rack should be identifiable by rack position or asset tag so that what is collected can be matched to the request list.

ITAD covers the end of the hardware's life. Work on equipment that stays in service, such as reboots or cable checks, falls under remote hands, and technical work that needs diagnostic judgement and configuration knowledge falls under smart hands. Hardware monitoring, provided by the Reboot Monkey NOC, applies to the customer's servers and network equipment that remain in service, not to the hardware being retired.

Why Reboot Monkey for ITAD in Mexico

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. Its engineers are dispatched to the customer's facility.

Retired hardware can fall under two services, and the difference matters when a request is written. Data center decommissioning is the removal and disposal of retired hardware. ITAD adds the treatment of the storage media, the transport, and the resale or buyback of equipment that can be used again. A customer leaving a room may need both, while a customer who only needs drives wiped or destroyed and equipment bought back needs ITAD alone.

ITAD work is processed by Reboot Monkey staff, in a partner's processing facility or on the customer's site. The partner provides the facility; the processing is done by Reboot Monkey staff.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That figure describes the company as a whole. A request in Mexico is scoped from its own details: the hardware, the site and the route chosen for the storage media.

The same operator covers every stage of the hardware's time in a data centre, so a customer retiring equipment can also arrange the work before or after it:

  • Rack and stack: new hardware is installed, mounted and cabled.
  • Server migration: equipment moves between racks, rooms or facilities.
  • Remote hands and smart hands: physical tasks on the customer's instruction, and technical work that needs diagnostic judgement.
  • Hardware monitoring: the Reboot Monkey NOC monitors the customer's servers and network equipment.
  • Data center decommissioning and ITAD: retired hardware is removed and disposed of, storage media are wiped or destroyed, and reusable equipment is resold or bought back.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in Mexico.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

Frequently Asked Questions

What does IT asset disposition cover in Mexico?

IT asset disposition in Mexico covers collection of retired hardware at the customer's site or data centre, transport for processing, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Storage media can be destroyed on the customer's site by shredding or degaussing. Electronic waste falls under NOM-161-SEMARNAT-2011.

Where does Reboot Monkey process retired hardware in Mexico?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in Mexico?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in Mexico?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Plan the retirement of your hardware in Mexico

Describe the equipment, its location and the route for the storage media, and Reboot Monkey will scope the job.

Published:

Get a quote