Map: Natural Earth
Data Center Decommissioning
Data Center Decommissioning in Norway
Data center decommissioning in Norway is the removal and disposal of retired hardware from the customer's racks. Reboot Monkey engineers record serial numbers, asset tags and rack positions against the customer's asset list, remove the equipment in a scheduled window, and log every item as it is removed.
9
of our services in Norway
Choose your city

Photo: Øyvind Holmstad · CC BY-SA 3.0 · cropped · source
Oslo
- Data Center Decommissioning
- Colocation
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
Services in Data Center Decommissioning
- Data Center Decommissioning
- Colocation
- Data Center Migration
- ITAD
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
In depth
Data Center Decommissioning: 7 sections, open any to read more.
Data Center Decommissioning in Norway: How It Works
Data center decommissioning in Norway is the removal and disposal of retired hardware from a customer's racks. Reboot Monkey is a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it is not a datacenter owner. The equipment being retired belongs to the customer, and the removal is planned and recorded against the customer's own asset list.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. For the removal itself, Reboot Monkey engineers are dispatched to the customer's facility in Norway, and the plan for a job is built around the access the operator allows.
The work has four parts. The first is identification. Serial numbers, asset tags and rack positions are recorded against the customer's asset list. The asset list is therefore the reference for the whole job: what is in each rack can be compared with what the customer expects to be there, and any difference between the two is visible before anything is taken out.
Because identification comes first, the job does not depend on anyone's memory of what a rack holds. The asset list and the recorded rack positions carry that information from the first part of the work to the last.
The second part is scheduling. Removal is scheduled with the customer in advance, including any out-of-hours or weekend windows the facility requires. The date and the window are agreed before engineers are dispatched, so a requirement for out-of-hours access is part of the plan from the start and is not discovered on the day of the work.
The third part is the removal itself. Retired hardware is taken out of the racks by Reboot Monkey engineers in the window that was agreed. Removal is the step at which equipment physically leaves the customer's racks, and identification and scheduling are completed before it.
The fourth part is logging. Every item is logged as it is removed. The log is the running record of the job: it is written while the work happens and not reconstructed afterwards. Each entry corresponds to one item taken out of a rack. Read together with the asset list, the log shows which recorded items have left the rack and which have not.
Reboot Monkey engineers carry the job from the first record to the last log entry, and the customer's instruction is the authority for what is removed.
A buyer deciding whether to proceed needs three things ready: the customer's asset list, the dates on which access is possible, and a decision on what happens to the hardware once it has left the rack. The first two define the schedule. The third decides whether the job ends at removal or continues into IT asset disposition.
Datacenter Landscape in Norway
Data centres in Norway, ordered by the number of networks present:
- Vaultica Data Centers | OSL01 (Vaultica Data Centers - NORDICS), 1 Selma Ellefsens Vei, 0581 Oslo: 53 networks; carriers 31173 Services, Arelion, Blix, Portlane and euNetworks
- Bulk Oslo Internet Exchange - OS-IX (Bulk Infrastructure AS), Hans Møller Gasmanns vei 9, 0598 Oslo: 45 networks; carriers Bahnhof, Blix, EXA Infrastructure, Obenet, Portlane and others
- Blix BDC Oslo (Blix Solutions AS), 26 Lindeberg næringsvei, 1067 Oslo: 27 networks; carriers Blix, Obenet and Portlane
- Gigahost Sandefjord (Gigahost AS), Søndre Kullerød 2, 3241 Sandefjord: 18 networks
- Basefarm OSL5 (Basefarm AS), Nordliveien 21, 1476 Rasta: 13 networks; carriers Blix
- DC1-Stavanger (Green Mountain AS), Hodneveien 240, 4159 Rennesøy: 11 networks; carriers Blix
- Vaultica Data Centers | OSL02 (Vaultica Data Centers - NORDICS), Rosenholmveien 25, 1414 Trollåsen, Oslo: 10 networks; carriers Blix
- Arelion Oslo OKR/C, Østre Aker Vei 18, 0581 Oslo: 9 networks; carriers Arelion and Bahnhof
- Verizon HMG9 Oslo (Verizon Communications, Inc.), Hans Moller Gasmansvei 9, 0598 Oslo: 9 networks; carriers Portlane
- Blix CJH Oslo (Blix Solutions AS), C.J. Hambros plass 2, 0164 Oslo: 8 networks; carriers Blix
Data Center Decommissioning by City
City pages for data center decommissioning in Norway:
- Oslo: https://www.rebootmonkey.com/en/norway/oslo/data-center-decommissioning/
Data Center Decommissioning in Norway: What We Deliver
Data center decommissioning is the removal and disposal of retired hardware, and the scope of a job in Norway is defined by the equipment rather than by the room it sits in. The categories in scope are servers, switches, storage arrays, and their cabling and rail kits. A request names the categories the customer is retiring, which keeps the asset list, the removal window and the log tied to the same set of equipment.
Cabling is part of the same job and is not a separate request. The cabling and the rail kits that held the equipment in the rack are removed together with the hardware they served, and each is logged as it comes out.
Each category is handled within one job and not as separate requests. A customer retiring only one category, for example storage arrays, names that category in the request, and the same recording against the asset list, scheduling in advance and logging as each item is removed apply to it. The category list matters to a procurement manager because it fixes what the quote covers: the retired equipment and the work around it, and nothing else.
Decommissioning ends with disposal, and the route is set with the customer. Where retired hardware carries data or has resale value, the work continues as IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. Collection and transport are part of the disposition work, so the movement of hardware away from the customer's site is arranged within the same service. Reboot Monkey staff carry out the processing, either in a partner's processing facility or on the customer's site. Because resale and buyback are quoted case by case, the value of retired hardware is assessed for each job.
The neighbouring services have their own definitions, and a request is easier to scope when they are kept apart from decommissioning:
- Server migration: moving equipment between racks, rooms or facilities. Equipment that is moved and stays in service falls under this service, not under decommissioning, and the move is requested as its own piece of work.
- Rack and stack: installing, mounting and cabling new hardware. It is the service that applies to replacement equipment when retired hardware is being swapped out.
- Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks). These are individual actions on equipment that stays in place, not a removal programme.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge. It applies where a task needs an engineer to decide what to do and not only to carry out an instruction.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. It is a monitoring service and not part of the physical removal.
Why Reboot Monkey for Data Center Decommissioning in Norway
Reboot Monkey delivers decommissioning alongside rack and stack, server migration, remote hands, smart hands, IT asset disposition and hardware monitoring. A customer whose hardware was delivered, installed or supported through Reboot Monkey can retire it through the same operator, and a retirement that forms part of a larger change can be requested together with the neighbouring service. The usual combinations follow directly from the service definitions.
In a hardware refresh, the old equipment is decommissioned and the replacement hardware is installed, mounted and cabled through rack and stack. Both pieces of work are carried out by Reboot Monkey engineers in the customer's facility, so the retired and the new equipment are handled by the same operator.
In a consolidation, equipment that stays in service moves between racks, rooms or facilities through server migration, and the equipment that is no longer needed is decommissioned. The asset list divides the equipment into what moves and what goes, and each group falls under its own service.
Where the retired hardware holds data or has resale value, decommissioning removes it and IT asset disposition takes over from there, so removal and processing are planned together.
The network side of a rack is handled by the same operator. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. That cabling is within the scope of a decommissioning, so a customer who bought the network through Reboot Monkey has one operator for both the installation and the removal of it.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. The backup is named per customer site, so it applies to a decommissioning window in the same way as to any other work at that site, and the removal agreed with the customer does not rest on a single person being available.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. The figure describes the company as a whole and is not a count of work in Norway.
Ordering starts with a request that states the equipment to be retired, the access windows available and, where relevant, the disposal route. Prices are quoted on request and depend on the customer and the size of the job. Engineers are dispatched to the customer's facility in the agreed window, and the recording, removal and logging follow in that order.
How Reboot Monkey Works
These terms apply in every facility in Norway where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Frequently Asked Questions
What does data center decommissioning cover in Norway?
Data center decommissioning in Norway covers the removal and disposal of retired hardware: servers, switches, storage arrays, and their cabling and rail kits. Serial numbers, asset tags and rack positions are recorded against the customer's asset list, removal is scheduled in advance including any out-of-hours or weekend windows the facility requires, and every item is logged as it is removed.
Do you work in every datacenter in Norway?
Reboot Monkey engineers work in any facility in Norway where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Norway?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with data center decommissioning in Norway?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center decommissioning work is scheduled under the operator's rules.
Cities we cover in Norway
Plan a Decommissioning in Norway
Send the equipment to be retired and the access windows available. Prices are quoted on request and depend on the customer and the size of the job.