Skip to content
Map of Norway: data centres as dots, the cities with a Reboot Monkey page highlighted: Oslo

Map: Natural Earth

Smart Hands

Data Center Smart Hands in Norway

Smart hands is technical work that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers are dispatched to the customer's facility to provide on-site IT support in Norway data centers, working on the customer's own equipment. Each job is scoped and quoted from the customer's description of the task.

  • 9

    of our services in Norway

Choose your city

  • The white marble Oslo Opera House sloping into the fjord, a glass sculpture floating in front and new Bjorvika towers behind

    Photo: Øyvind Holmstad · CC BY-SA 3.0 · cropped · source

    Oslo

    • Smart Hands
    • Colocation
    • Data Center Decommissioning
    • Data Center Migration
    • Rack and Stack
    • Remote Hands
    • Server Migration
    Smart Hands Oslo

In depth

Smart Hands: 9 sections, open any to read more.

Data Center Smart Hands in Norway: How It Works

Smart hands is technical work that needs diagnostic judgement and configuration knowledge. In Norway, Reboot Monkey engineers are dispatched to the customer's facility to carry out that work on the customer's own equipment: finding the cause of a fault, configuring a device after installation, or working through a problem that a fixed checklist does not cover.

The line between smart hands and remote hands decides how a request is written. Remote hands means physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. There the customer says what to do and the engineer does it. With smart hands the customer describes the symptom or the end state they need, and the engineer applies judgement to reach it. Stating clearly which kind applies lets Reboot Monkey scope the work before an engineer is sent.

A request follows a short sequence. The customer describes the task, the facility and the equipment involved. Reboot Monkey scopes the job and quotes it. Once the quote is accepted, an engineer is dispatched to the customer's facility and carries out the work on the equipment named in the request.

A complete request names the rack or cage, the device, the symptom or the target configuration, any change window that the customer's own process requires, and the person on the customer's side who can confirm that the work is finished. Each of those details removes a question that would otherwise have to be asked after the request is raised, and smart hands work, which depends on judgement, benefits from having them stated at the start. The more of this a request carries, the less the engineer has to establish on site.

Datacenter Landscape in Norway

Data centres in Norway, ordered by the number of networks present:

  • Vaultica Data Centers | OSL01 (Vaultica Data Centers - NORDICS), 1 Selma Ellefsens Vei, 0581 Oslo: 53 networks; carriers 31173 Services, Arelion, Blix, Portlane and euNetworks
  • Bulk Oslo Internet Exchange - OS-IX (Bulk Infrastructure AS), Hans Møller Gasmanns vei 9, 0598 Oslo: 45 networks; carriers Bahnhof, Blix, EXA Infrastructure, Obenet, Portlane and others
  • Blix BDC Oslo (Blix Solutions AS), 26 Lindeberg næringsvei, 1067 Oslo: 27 networks; carriers Blix, Obenet and Portlane
  • Gigahost Sandefjord (Gigahost AS), Søndre Kullerød 2, 3241 Sandefjord: 18 networks
  • Basefarm OSL5 (Basefarm AS), Nordliveien 21, 1476 Rasta: 13 networks; carriers Blix
  • DC1-Stavanger (Green Mountain AS), Hodneveien 240, 4159 Rennesøy: 11 networks; carriers Blix
  • Vaultica Data Centers | OSL02 (Vaultica Data Centers - NORDICS), Rosenholmveien 25, 1414 Trollåsen, Oslo: 10 networks; carriers Blix
  • Arelion Oslo OKR/C, Østre Aker Vei 18, 0581 Oslo: 9 networks; carriers Arelion and Bahnhof
  • Verizon HMG9 Oslo (Verizon Communications, Inc.), Hans Moller Gasmansvei 9, 0598 Oslo: 9 networks; carriers Portlane
  • Blix CJH Oslo (Blix Solutions AS), C.J. Hambros plass 2, 0164 Oslo: 8 networks; carriers Blix

Smart Hands by City

City pages for smart hands in Norway:

  • Oslo: https://www.rebootmonkey.com/en/norway/oslo/smart-hands/

Data Center Smart Hands in Norway: What We Deliver

Network work sits alongside smart hands. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When a connection does not come up after patching, tracing the cause is smart hands work, because it calls for diagnostic judgement and configuration knowledge rather than a repeated instruction.

Each service has its own scope, and the service named in a request determines what is scoped and quoted. A job that touches more than one of them, such as a migration followed by the removal of the old hardware, can be described as stages so that each stage is scoped on its own. The quote reflects the size of each stage.

Smart hands also applies inside rack and stack, migration and decommissioning work. When a job of that kind reaches a step that calls for a diagnostic decision or a configuration change, that step is smart hands work, and the request should say where it falls.

Alongside smart hands and remote hands, Reboot Monkey delivers the following services.

  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Rapid Response in Norway

Rapid response in smart hands depends on who is available and what they bring to site. For every customer site, Reboot Monkey names a second, briefed engineer as backup. The cover is arranged per site, so the person who would step in is identified before a request is raised. A backup does not change the scope of the job; it changes who can take it up.

Tools are part of the response. A fibre inspection scope and cleaning kit are available on request, so a request that involves a suspect fibre link can ask for them when it is raised. A fibre link that fails needs diagnosis, and inspecting and cleaning the connector is one of the steps that diagnosis can include.

Customers who use hardware monitoring can raise a smart hands request when an alert points to a fault that needs someone at the rack. Monitoring shows that something is wrong; smart hands is the step in which an engineer works out why and puts it right.

Work that depends on a new connection should say so in the request. The cross connect or carrier circuit is ordered from the facility operator or the carrier, and the engineer then patches the cabling, so such a request is scoped as linked pieces of work.

Smart hands engineers apply configuration knowledge, but the intended configuration is the customer's decision, so having the current configuration of the affected device and the intended change ready when the request is raised keeps the work on site short. If the fault proves wider than the request describes, the customer contact named in the request is the person the engineer turns to.

Stronger Security in Norway

Security on a smart hands job starts with who controls access to the building. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

On the customer's side, security is a matter of how the request is written. Name the devices that are in scope and state what must not be touched. Smart hands work includes configuration, so any change to a live configuration should be tied to an instruction the customer has approved before the engineer starts.

Retired hardware raises a separate question: what happens to the data on it. Data wiping, shredding and degaussing belong to IT asset disposition rather than to a smart hands visit, so a request that involves retired storage should be raised under that service.

Anything outside the devices named in a request is raised as a new request, so that it is scoped and quoted on its own and the customer approves it separately. That keeps the approved scope and the work actually done aligned.

Before a configuration change, the customer should keep a copy of the existing configuration so that the change can be reversed if the result is not what was intended. Where an engineer needs credentials for a device, the customer decides what access to give and for how long, and withdraws it when the job is finished.

A request that identifies the task, the devices and the person who approved the work also gives the customer a record to set against its own change log. Where a job runs over several visits, each visit is raised as its own request for the same reason.

Why Reboot Monkey for Data Center Smart Hands in Norway

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. It is not a hosting company and it does not own datacenters.

Because the same company sells the rack space, the IP transit, the leased IP addresses and the network, a smart hands request can refer to equipment and connections that Reboot Monkey itself supplied. A request can therefore name the equipment and the connection together. The engineer who patches a cable in the customer's rack is working within the delivery of that connection, not outside it.

The roles on a job are plain. The customer instructs and approves, Reboot Monkey scopes the job, quotes it and sends the engineer, and the work is carried out on the customer's own equipment and cabling.

Prices are quoted on request and depend on the customer and the size of the job.

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

When comparing suppliers for smart hands, the useful questions are factual ones. Procurement can put them to Reboot Monkey before a job is raised. Which service type does the work fall under? Who is the named backup for the site? Which tools, such as a fibre inspection scope, should be requested in advance? Does the job need a new cross connect or carrier circuit ordered first? Is retired storage involved, which belongs under IT asset disposition? Is hardware monitoring already in place, so that an alert can be cited in the request? Each of them maps to a defined part of how the service is delivered.

How Reboot Monkey Works

These terms apply in every facility in Norway where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What Services Do Smart Hands Provide?

Smart hands provides technical work that needs diagnostic judgement and configuration knowledge, carried out by Reboot Monkey engineers on the customer's equipment. It sits alongside remote hands (physical tasks on the customer's instruction), rack and stack, server migration, data center decommissioning, IT asset disposition and hardware monitoring, which are defined as separate services with their own scope.

What does smart hands cover in Norway?

In Norway, smart hands covers technical work on the customer's own equipment that needs diagnostic judgement and configuration knowledge, including tracing a connection that does not come up after patching. Reboot Monkey scopes and quotes each job from the customer's description of the task, the facility and the equipment, then dispatches an engineer to the customer's facility.

Do you provide on-site IT support in Norway data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility in Norway to carry out on-site IT support work such as smart hands, remote hands, rack and stack and server migration. The customer describes the task and the equipment, Reboot Monkey quotes the job, and the engineer works on the equipment named in the request.

Do you work in every datacenter in Norway?

Reboot Monkey engineers work in any facility in Norway where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Norway?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with smart hands in Norway?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Data Center Smart Hands in Norway

Describe the task, the facility and the equipment, and Reboot Monkey will scope and quote the job.

Published:

Get a quote