Skip to content
Map of Norway: data centres as dots, the cities with a Reboot Monkey page highlighted: Oslo

Map: Natural Earth

Remote Hands

Remote Hands in Norway

Remote hands in Norway is physical work carried out on the customer's instruction inside a data center: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the customer's facility and perform the task at the rack.

  • 9

    of our services in Norway

Choose your city

  • The white marble Oslo Opera House sloping into the fjord, a glass sculpture floating in front and new Bjorvika towers behind

    Photo: Øyvind Holmstad · CC BY-SA 3.0 · cropped · source

    Oslo

    • Remote Hands
    • Colocation
    • Data Center Decommissioning
    • Data Center Migration
    • Rack and Stack
    • Server Migration
    • Smart Hands
    Remote Hands Oslo

In depth

Remote Hands: 8 sections, open any to read more.

Remote Hands in Norway: How It Works

Remote Hands in Norway is physical work on equipment that stays where it is, inside the data center that houses it, carried out on the customer's instruction. The tasks are reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the customer's facility in Norway, perform the task at the rack and work to the instruction the customer has given. The customer decides what is done, and the engineer carries it out. Remote hands is defined by the instruction and not by the engineer's diagnosis. The customer names the device and the task, and the engineer performs that task. A restart is remote hands, and so is exchanging a named component. Work that depends on the engineer deciding what is wrong, or on knowledge of how a device is configured, is scoped as a different service. Remote hands requests are carried out by Reboot Monkey field engineers. As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That figure describes the field operation of the company as a whole. Three questions decide whether remote hands is the right order. Is the task physical work? Can the customer state it as an instruction? Is the equipment already in a data center in Norway? When all three answers are yes, the job fits remote hands. The engineer then goes to where the equipment already is, and nothing has to move to a different building for the task to be done. The same definition serves each reader differently. For a CTO, the instruction is the interface to the engineer: whatever is written in it is what gets done at the rack. For an IT director, it is the way to hand physical work to Reboot Monkey while the team keeps the decisions about the systems. For a procurement manager, the list of tasks is the scope of what is being ordered, and anything outside it is a separate service. None of these readings changes the task itself, which stays a physical action on the customer's instruction.

Datacenter Landscape in Norway

Data centres in Norway, ordered by the number of networks present:

  • Vaultica Data Centers | OSL01 (Vaultica Data Centers - NORDICS), 1 Selma Ellefsens Vei, 0581 Oslo: 53 networks; carriers 31173 Services, Arelion, Blix, Portlane and euNetworks
  • Bulk Oslo Internet Exchange - OS-IX (Bulk Infrastructure AS), Hans Møller Gasmanns vei 9, 0598 Oslo: 45 networks; carriers Bahnhof, Blix, EXA Infrastructure, Obenet, Portlane and others
  • Blix BDC Oslo (Blix Solutions AS), 26 Lindeberg næringsvei, 1067 Oslo: 27 networks; carriers Blix, Obenet and Portlane
  • Gigahost Sandefjord (Gigahost AS), Søndre Kullerød 2, 3241 Sandefjord: 18 networks
  • Basefarm OSL5 (Basefarm AS), Nordliveien 21, 1476 Rasta: 13 networks; carriers Blix
  • DC1-Stavanger (Green Mountain AS), Hodneveien 240, 4159 Rennesøy: 11 networks; carriers Blix
  • Vaultica Data Centers | OSL02 (Vaultica Data Centers - NORDICS), Rosenholmveien 25, 1414 Trollåsen, Oslo: 10 networks; carriers Blix
  • Arelion Oslo OKR/C, Østre Aker Vei 18, 0581 Oslo: 9 networks; carriers Arelion and Bahnhof
  • Verizon HMG9 Oslo (Verizon Communications, Inc.), Hans Moller Gasmansvei 9, 0598 Oslo: 9 networks; carriers Portlane
  • Blix CJH Oslo (Blix Solutions AS), C.J. Hambros plass 2, 0164 Oslo: 8 networks; carriers Blix

Remote Hands by City

City pages for remote hands in Norway:

  • Oslo: https://www.rebootmonkey.com/en/norway/oslo/remote-hands/

Remote Hands in Norway: What We Deliver

On-site IT support in Norway data centers at Reboot Monkey is a set of defined services, and each one is named for the work the engineer performs. Remote hands is the service for physical tasks on instruction. The related services cover work that needs judgement, work on new or moving equipment, work at the end of a system's life, and monitoring.

The boundaries between these services follow the task. A restart is remote hands, while working out why a device keeps failing is smart hands. Mounting a new server in a rack is rack and stack, while exchanging a component in a server that is already racked is a component swap under remote hands. Shifting a server from one rack to another, or from one room or facility to another, is server migration. Taking hardware out of service for good is decommissioning, and ITAD covers what happens to the data and the hardware once it has been taken out.

Monitoring is a different kind of service from the physical ones. Hardware monitoring is performed by the Reboot Monkey NOC, which watches the customer's servers and network equipment, while the physical tasks at the rack are carried out by field engineers. Each service has its own definition, and a request is scoped against the definition it matches.

The remote hands definition names tasks, not device types. What matters for scope is whether the task is a physical action on the customer's instruction, and whether it stops short of diagnosis and configuration. The related services are defined as follows.

  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Rack and stack: installing, mounting and cabling new hardware.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

What Remote Hands Looks Like in Practice

Each remote hands task has a concrete shape at the rack, and the request that triggers it is short. A reboot is the restart of a device, carried out by an engineer standing at it as the instruction asks. A cable check is an inspection of the cabling in the customer's rack against the instruction. Reboot Monkey engineers install and patch the cabling in the customer's rack, and a fibre inspection scope and cleaning kit are available on request. A component swap is the physical exchange of the component the instruction names. A visual check is an engineer looking at the equipment in the rack as the instruction directs.

The engineer does not widen the job. A reboot request is a reboot, a visual check is a look at the named equipment, and a component swap is the exchange of the named component. If the work turns out to need diagnostic judgement and configuration knowledge, it is smart hands by definition and is scoped as that service.

The instruction is the main input to a good job. It identifies the device and the rack, names the task, and states the outcome the customer expects. Visual checks and cable checks look at the equipment without changing it, while reboots and component swaps change its state. Saying in the instruction which kind of task is wanted keeps the job inside the remote hands definition. A request written that way leaves the engineer nothing to interpret, and the customer's team keeps every decision about the systems.

Every task is carried out inside the customer's own facility. The customer's equipment, racks and cabling are what the engineer handles, and Reboot Monkey does not move anything to a site of its own. The job runs in this order.

  • First, the customer states the device, the rack and the task in the request.
  • Next, a Reboot Monkey engineer is dispatched to the customer's facility.
  • The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
  • A second, briefed Reboot Monkey engineer is named as backup for every customer site.
  • Then the engineer carries out the task at the rack as the instruction states it.

Why Reboot Monkey for Remote Hands in Norway

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. Remote hands is one of the support services in that range.

For a buyer, the practical consequence is that the operator that sells the rack space and the network also supplies the engineers who work on the equipment in the rack. For an IT director, that means one operator to contact for a task, an installation or a monitoring question. If a job grows beyond remote hands, the neighbouring services (rack and stack, server migration, data center decommissioning, ITAD and hardware monitoring) come from the same operator.

Network follows the same pattern. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility. The customer asks Reboot Monkey for the network, and Reboot Monkey places the orders with the parties that provide the circuits.

Remote hands also fits the way Reboot Monkey is organised. Services are defined by the work performed, field engineers carry out the physical work, and the NOC handles monitoring. A request for remote hands in Norway is therefore a request for a specific piece of field work, and the definitions of the related services keep each quote tied to the work performed.

Prices are quoted on request and depend on the customer and the size of the job. A request therefore starts with the device, the rack and the task, so the size of the job is clear from the first message.

A procurement manager can check the order against concrete items: the task list, the device and the rack, the engineer dispatched to the customer's facility, and a quote that follows from the customer and the size of the job.

How Reboot Monkey Works

These terms apply in every facility in Norway where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Remote Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Frequently Asked Questions

What does remote hands cover in Norway?

Remote hands in Norway covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. A Reboot Monkey engineer is dispatched to the customer's facility and performs the task at the rack. Work that needs diagnostic judgement and configuration knowledge is smart hands, and installing new hardware is rack and stack, so each is scoped as its own service.

Do you provide on-site IT support in Norway data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility in Norway and work at the customer's rack. Physical tasks on the customer's instruction are remote hands, and technical work needing diagnostic judgement and configuration knowledge is smart hands. A request starts with the customer naming the device, the rack and the task, and the quote depends on the customer and the size of the job.

Do you work in every datacenter in Norway?

Reboot Monkey engineers work in any facility in Norway where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Norway?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with remote hands in Norway?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.

Request Remote Hands in Norway

Send Reboot Monkey the device, the rack and the task, and receive a quote for the job.

Published:

Get a quote