Map: Natural Earth
Data Center Migration
Data Center Migration in Norway
Data center migration in Norway is the physical move of a customer's equipment between racks, rooms or facilities. Reboot Monkey can run the whole move or work alongside the customer's own team, with engineers dispatched to the customer's facility and the split of tasks agreed per project.
9
of our services in Norway
Choose your city

Photo: Øyvind Holmstad · CC BY-SA 3.0 · cropped · source
Oslo
- Data Center Migration
- Colocation
- Data Center Decommissioning
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
Services in Data Center Migration
In depth
Data Center Migration: 7 sections, open any to read more.
Data Center Migration in Norway: How It Works
A data center migration moves a customer's own equipment between racks, rooms or facilities. In Norway the buildings that hold that equipment belong to other companies, so the work is a physical project on the customer's hardware, carried out by Reboot Monkey engineers who are dispatched to the customer's facility.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
The first decision on any migration is who does what. Reboot Monkey can run the whole physical move or work alongside the customer's own team; who disconnects, reconnects and tests the equipment is agreed per project. A customer whose staff already know the applications may keep the testing, while a customer without spare capacity may hand over the complete move. Either split is settled before a date is set, so each party knows which steps belong to it.
A request passes through the same stages whatever the size of the job.
When a migration brings new hardware into the destination, the installing, mounting and cabling of that hardware is rack and stack work and can be scoped alongside the move. Before the move, an inventory of the equipment and of the cabling in each rack gives the project its starting point, and cable checks and visual checks, which are remote hands tasks, can be requested at either end on the customer's instruction.
The stages are the same for a move between racks, rooms or facilities. What changes is how many sites the project touches and how many cross connects and carrier circuits need to be ordered.
Prices are quoted on request and depend on the customer and the size of the job. A request that sets out the equipment, the origin, the destination and the intended split of tasks gives the quote its basis.
- Request. The customer states which equipment moves, where it sits now, where it is going and which steps Reboot Monkey performs.
- Assignment. A Reboot Monkey engineer is allocated to the project and briefed on the equipment and the destination.
- Destination. Rack space, IP transit, leased IP addresses and network for the new location can be ordered from Reboot Monkey alongside the move.
- Connectivity. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack.
- Move. Equipment is disconnected, moved, mounted and reconnected according to the split agreed at the start.
- Testing. The tests that show the equipment working in its new location are run by whoever the project assigns them to.
- Retirement. Hardware that does not move is removed through data center decommissioning or IT asset disposition.
Datacenter Landscape in Norway
Data centres in Norway, ordered by the number of networks present:
- Vaultica Data Centers | OSL01 (Vaultica Data Centers - NORDICS), 1 Selma Ellefsens Vei, 0581 Oslo: 53 networks; carriers 31173 Services, Arelion, Blix, Portlane and euNetworks
- Bulk Oslo Internet Exchange - OS-IX (Bulk Infrastructure AS), Hans Møller Gasmanns vei 9, 0598 Oslo: 45 networks; carriers Bahnhof, Blix, EXA Infrastructure, Obenet, Portlane and others
- Blix BDC Oslo (Blix Solutions AS), 26 Lindeberg næringsvei, 1067 Oslo: 27 networks; carriers Blix, Obenet and Portlane
- Gigahost Sandefjord (Gigahost AS), Søndre Kullerød 2, 3241 Sandefjord: 18 networks
- Basefarm OSL5 (Basefarm AS), Nordliveien 21, 1476 Rasta: 13 networks; carriers Blix
- DC1-Stavanger (Green Mountain AS), Hodneveien 240, 4159 Rennesøy: 11 networks; carriers Blix
- Vaultica Data Centers | OSL02 (Vaultica Data Centers - NORDICS), Rosenholmveien 25, 1414 Trollåsen, Oslo: 10 networks; carriers Blix
- Arelion Oslo OKR/C, Østre Aker Vei 18, 0581 Oslo: 9 networks; carriers Arelion and Bahnhof
- Verizon HMG9 Oslo (Verizon Communications, Inc.), Hans Moller Gasmansvei 9, 0598 Oslo: 9 networks; carriers Portlane
- Blix CJH Oslo (Blix Solutions AS), C.J. Hambros plass 2, 0164 Oslo: 8 networks; carriers Blix
Data Center Migration by City
City pages for data center migration in Norway:
- Oslo: https://www.rebootmonkey.com/en/norway/oslo/data-center-migration/
Data Center Migration in Norway: What We Deliver
A migration draws on several Reboot Monkey services, each defined by the work it covers, and a project uses as many of them as the move requires.
Combinations differ by project. A move between racks or rooms in one facility is mostly server migration, with remote hands for the checks that follow. A move from one facility to another adds the network work: cross connects and carrier circuits at the destination, and cabling installed and patched in the customer's rack. A consolidation or an exit from a site adds data center decommissioning and, where equipment is not coming along, IT asset disposition. A refresh carried out during the move adds rack and stack for the new hardware. Hardware monitoring is added where the customer wants the relocated equipment watched from the first day it runs in the new location.
The difference between remote hands and smart hands decides how a task is requested. A task that can be described completely in advance, such as moving a cable to a labelled port or swapping a component, is a remote hands instruction. A task whose outcome depends on what the engineer finds, such as tracing why a link does not come up after the move, needs diagnostic judgement and configuration knowledge and is smart hands. Stating which of the two a task is when the request is raised lets the work be assigned to the right engineer.
Reboot Monkey does not host the equipment it moves: the servers stay the customer's own, placed in rack space that Reboot Monkey sells inside a data centre the operator runs.
- Server migration: moving equipment between racks, rooms or facilities. This is the core of the project and covers the physical relocation of the customer's servers and network equipment.
- Rack and stack: installing, mounting and cabling new hardware. It applies when the destination receives equipment that was not part of the original estate, whether it replaces retired hardware or adds to what moved.
- Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. After a move they cover the checks the customer's team requests on a specific device or cable.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge. Faults that surface when equipment is brought up in its new location are the kind of work this covers.
- Data center decommissioning: removing and disposing of retired hardware. Equipment that stays behind at the source after cutover is handled here.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC, applicable to the relocated equipment once it is in place.
Why Reboot Monkey for Data Center Migration in Norway
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. For a migration this means the capacity at the destination and the physical work of getting equipment there can be requested from the same company.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. The origin and destination of a move are often different buildings and sometimes different countries, which makes the reach of the field engineer network a practical question for any migration.
Reboot Monkey is not a hosting company and not a datacenter owner. A migration therefore does not move workloads onto a platform of Reboot Monkey's own. The equipment being moved is the customer's, it is installed in rack space inside a facility that another company owns, and the decisions about what moves, where it goes and when remain the customer's. Reboot Monkey carries out the physical work that the agreement assigns to it.
That definition also marks the limit of the service. Reboot Monkey fits a migration when the equipment sits, or is going to sit, in a data centre that another company runs, and when the missing capacity is physical: engineers to disconnect, move, mount, cable and reconnect, or to support the equipment once it is in place. It does not fit a request to move workloads to a hosted platform, because Reboot Monkey does not operate one.
Migrations also expose gaps in a customer's own team. Some tasks are instructions that can be followed exactly, and others need an engineer who can read a configuration and diagnose a fault. Reboot Monkey provides both, as remote hands and smart hands, so a customer whose team lacks the time or the specific knowledge for part of the project can assign that part to Reboot Monkey through the per-project agreement.
A second, briefed Reboot Monkey engineer is named as backup for every customer site, and a migration site is treated in the same way as any other customer site.
A migration seldom ends the customer's need for support of the equipment. After the move, the same equipment continues to need reboots, cable checks, component swaps and diagnostic work, and hardware monitoring by the Reboot Monkey NOC remains available for the customer's servers and network equipment. Hardware monitoring is a continuing service rather than a project task, so it can be requested for equipment that has been in place for a long time as well as for equipment that has just moved.
How Reboot Monkey Works
These terms apply in every facility in Norway where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data Center Migration
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does data center migration cover in Norway?
Data center migration in Norway covers the physical move of a customer's equipment between racks, rooms or facilities. Reboot Monkey can run the whole move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project. Rack and stack, data center decommissioning and IT asset disposition can be added to the same project.
Do you work in every datacenter in Norway?
Reboot Monkey engineers work in any facility in Norway where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Norway?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with data center migration in Norway?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center migration work is scheduled under the operator's rules.
Cities we cover in Norway
Plan a data center migration in Norway
Send the equipment list, the origin, the destination and the intended split of tasks, and Reboot Monkey will quote the job.