Map: Natural Earth
Rack and Stack
Server Racking in Norway
Server racking in Norway is the installation, mounting and cabling of new hardware in a customer's rack. Reboot Monkey engineers carry out the work inside the data centre, including cabling, labelling and power-on checks, and quotes are on request. The work takes place in facilities that other companies own and run.
9
of our services in Norway
Choose your city

Photo: Øyvind Holmstad · CC BY-SA 3.0 · cropped · source
Oslo
- Rack and Stack
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Remote Hands
- Server Migration
- Smart Hands
Services in Rack and Stack
In depth
Rack and Stack: 7 sections, open any to read more.
Server Racking in Norway: How It Works
Rack and stack is the installation of new hardware: installing, mounting and cabling servers, switches and other equipment in a rack. For a business deploying equipment in Norway, it is the step that turns delivered hardware into equipment that is physically in place. Reboot Monkey is a third-party datacenter services operator, and it carries out this work inside data centres that other companies own and run. Its engineers are dispatched to the customer's facility to do the physical work.
Rack and stack applies to new hardware, and it ends when that hardware is mounted in its rack, cabled, labelled and has passed its power-on checks. The first question in any request is therefore whether the equipment is new, and the second is what state it should be in when the engineer finishes. Answering both in the request gives the quote and the engineer's brief a clear boundary to work to.
A useful request names the hardware to be installed, the facility and rack it is destined for, how each device is to be cabled and labelled, and the date by which the equipment needs to be in place. Those details let Reboot Monkey scope the work properly. Quotes are on request and depend on the customer and the size of the job, so the request should also say whether it covers a few devices or a larger deployment, and whether the work is to be done in one visit or in stages.
From request to finished work, the job follows this order.
- Scoping. Reboot Monkey reads the request and confirms the hardware, the rack and the cabling the installation needs.
- Quote. The customer receives a quote for the job, based on the customer and the size of the work.
- Assignment. A Reboot Monkey engineer is assigned to the job and briefed on it.
- Installation. The engineer mounts the hardware in the rack and cables it.
- Labelling. Cabling and equipment are labelled as part of the same job.
- Power-on checks. The installed equipment is powered on and checked.
- Handover. The customer takes over the installed hardware, ready for its own configuration or for further work.
Datacenter Landscape in Norway
Data centres in Norway, ordered by the number of networks present:
- Vaultica Data Centers | OSL01 (Vaultica Data Centers - NORDICS), 1 Selma Ellefsens Vei, 0581 Oslo: 53 networks; carriers 31173 Services, Arelion, Blix, Portlane and euNetworks
- Bulk Oslo Internet Exchange - OS-IX (Bulk Infrastructure AS), Hans Møller Gasmanns vei 9, 0598 Oslo: 45 networks; carriers Bahnhof, Blix, EXA Infrastructure, Obenet, Portlane and others
- Blix BDC Oslo (Blix Solutions AS), 26 Lindeberg næringsvei, 1067 Oslo: 27 networks; carriers Blix, Obenet and Portlane
- Gigahost Sandefjord (Gigahost AS), Søndre Kullerød 2, 3241 Sandefjord: 18 networks
- Basefarm OSL5 (Basefarm AS), Nordliveien 21, 1476 Rasta: 13 networks; carriers Blix
- DC1-Stavanger (Green Mountain AS), Hodneveien 240, 4159 Rennesøy: 11 networks; carriers Blix
- Vaultica Data Centers | OSL02 (Vaultica Data Centers - NORDICS), Rosenholmveien 25, 1414 Trollåsen, Oslo: 10 networks; carriers Blix
- Arelion Oslo OKR/C, Østre Aker Vei 18, 0581 Oslo: 9 networks; carriers Arelion and Bahnhof
- Verizon HMG9 Oslo (Verizon Communications, Inc.), Hans Moller Gasmansvei 9, 0598 Oslo: 9 networks; carriers Portlane
- Blix CJH Oslo (Blix Solutions AS), C.J. Hambros plass 2, 0164 Oslo: 8 networks; carriers Blix
Rack and Stack by City
City pages for rack and stack in Norway:
- Oslo: https://www.rebootmonkey.com/en/norway/oslo/rack-and-stack/
Server Racking in Norway: What We Deliver
The scope of a rack and stack job is the installation, mounting and cabling of new hardware, together with labelling and power-on checks. These are the tasks a Reboot Monkey engineer carries out in the customer's rack. Installation means the hardware is mounted in the rack position named in the request and cabled according to the layout agreed with the customer. Labelling is part of the same visit, and the power-on check is the final task, carried out on the equipment that was installed.
Cabling includes the network side of the rack. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. A customer can therefore include connectivity in the same request as the installation.
Where the installation includes fibre links, a fibre inspection scope and cleaning kit are available on request. The customer should ask for them when the request is placed.
Rack and stack is one of several services Reboot Monkey delivers inside customer facilities. The others cover the work around an installation, and each has its own scope.
- Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks).
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Why Reboot Monkey for Server Racking in Norway
The boundary between these services follows the type of work. New hardware going into a rack is rack and stack. Equipment that already stands in a rack and has to move to another rack, room or facility is server migration. Hardware that is being retired is decommissioning, and its disposal route, including data wiping, shredding or degaussing, is ITAD. Once equipment is installed, routine physical tasks on it are remote hands, and anything that needs configuration knowledge is smart hands. A hardware refresh can involve more than one of these: rack and stack for the new equipment and decommissioning for the old. Each is scoped and quoted for the work it involves.
Reboot Monkey is not a hosting company and it does not own datacenters. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. For a buyer in Norway, that means rack space, connectivity and installation can all be requested from the same operator. Data-centre hardware is among the things Reboot Monkey sells, so a request can cover the equipment as well as its installation. Where the customer supplies the hardware, the request names it in the same way.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Reboot Monkey's part in a rack and stack job is the work inside the customer's rack.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. For a buyer, the question of who will do the installation therefore has two named answers before the job starts, and the second engineer has been briefed on the same site.
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. The figure describes the field engineering organisation as a whole.
The people in a buyer's organisation tend to need different things settled before a request is placed. A procurement manager needs the type and quantity of hardware, the facility and the timing, because the quote depends on the customer and the size of the job. A CTO or IT director needs the cabling layout, the connectivity to be ordered and a decision on who takes over configuration once the hardware is powered on. Reboot Monkey works from those inputs because they define the job and what the engineer is briefed on.
How Reboot Monkey Works
These terms apply in every facility in Norway where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Rack and Stack
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Frequently Asked Questions
What does rack and stack cover in Norway?
Rack and stack covers the installation, mounting and cabling of new hardware, together with labelling and power-on checks. Reboot Monkey engineers carry out the work inside the customer's rack in the data centre. Cross connects and carrier circuits are ordered from the facility operator and the carriers present in the facility, and the engineers patch the cabling. Quotes are on request.
Do you work in every datacenter in Norway?
Reboot Monkey engineers work in any facility in Norway where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Norway?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with rack and stack in Norway?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.
Cities we cover in Norway
Plan a rack and stack job in Norway
Send the hardware list, the facility and the timing. Quotes are on request and depend on the customer and the size of the job.