Map: Natural Earth
Data Center Decommissioning
Data Center Decommissioning in Finland
Data center decommissioning in Finland is the removal and disposal of retired servers, switches, storage arrays and their cabling and rail kits. Reboot Monkey engineers are dispatched to the customer's facility, record serial numbers, asset tags and rack positions against the customer's asset list, and log every item as it is removed.
9
of our services in Finland
Choose your city

Photo: Markus Säynevirta · CC BY-SA 4.0 · cropped · source
Espoo
- Data Center Decommissioning
- Colocation
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands

Photo: Ввласенко · CC BY-SA 3.0 · source
Helsinki
- Data Center Decommissioning
- Colocation
- Data Center Migration
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
Services in Data Center Decommissioning
- Data Center Decommissioning
- Colocation
- Data Center Migration
- ITAD
- Rack and Stack
- Remote Hands
- Server Migration
- Smart Hands
In depth
Data Center Decommissioning: 8 sections, open any to read more.
Data Center Decommissioning in Finland: How It Works
Data center decommissioning is the removal and disposal of retired hardware. In Finland, Reboot Monkey delivers it as a third-party datacenter services operator: engineers are dispatched to the customer's facility, work from the customer's own asset list and take the equipment out of the racks. A project begins with a request that identifies the hardware being retired and ends with a record of every item that left the site. The stages in between are set out below so that an IT director or procurement manager can plan around them.
The request is where the questions that shape the rest of the job are settled: which hardware is in scope, which windows the facility requires, and how each category of removed equipment is to be disposed of. The work on site then follows the instructions the customer gave at that point.
The stages run in this order:
The recording stage is the one an IT director will want to see in practice. Each serial number, asset tag and rack position is entered against the matching line of the customer's asset list, and each item is logged as it is removed. At the end of the job the log and the asset list can be read side by side to confirm that every listed device has been accounted for.
Scheduling is agreed before an engineer is dispatched. Where the facility requires an out-of-hours or weekend window, that window is built into the plan with the customer in advance, so the date and time of removal are known to both sides before work starts.
- Request and scope: the customer identifies the hardware to be retired and supplies the asset list that the work is recorded against.
- Scheduling: removal is scheduled with the customer in advance, including any out-of-hours or weekend windows the facility requires.
- Recording: serial numbers, asset tags and rack positions are recorded against the customer's asset list.
- Removal: servers, switches, storage arrays and their cabling and rail kits are taken out, and every item is logged as it is removed.
- Disposal: the removed hardware is disposed of as agreed with the customer.
Datacenter Landscape in Finland
Data centres in Finland, ordered by the number of networks present:
- Digita Helsinki Pasila Broadcasting Tower (Digita Oy), Radiokatu 5, Uutiskatu 5, Televisiokatu 2, 00240 Helsinki: 57 networks; carriers 31173 Services, Bahnhof, Cinia Oy, DNA, EXA Infrastructure and others
- Equinix HE6 - Helsinki, Sinimäki (Equinix, Inc.), Sinimaentie 12, 02630 Espoo: 26 networks; carriers Arelion, Blix, Cinia Oy, DNA, Elisa Carrier Business and others
- Telia Helsinki Datacenter (Telia Company), Valimotie 5, 00380 Helsinki: 26 networks; carriers Arelion, Bahnhof, Cinia Oy, DNA, Elisa Carrier Business and others
- Innopoli (Technopolis), Tekniikantie 12, 02150 Espoo: 16 networks; carriers DNA, Elisa Carrier Business, RETN and euNetworks
- Tampere Hallituskatu 14 (Lahtiset Yhtymä Oy), Hallituskatu 14, 33200 Tampere: 16 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane
- LocalNet Lauttasaari (Nebula) (Local Loop Oy), Kiviaidankatu 2H, 00210 Helsinki: 14 networks; carriers Arelion and Elisa Carrier Business
- Equinix HE7 - Helsinki, Sinimäki (Equinix, Inc.), Sinimäentie 8, 02630 Espoo: 13 networks; carriers Blix, Cinia Oy, DNA, Elisa Carrier Business, Global Secure Layer and others
- Hetzner Online HEL1 (Helsinki) (Hetzner Online GmbH), Huurrekuja 10, 04360 Tuusula: 13 networks; carriers Cinia Oy, Core-Backbone, Elisa Carrier Business and aurologic GmbH
- Equinix HE3 - Helsinki, Suvilahti (Equinix, Inc.), Parrukatu 2, 00540 Helsinki: 12 networks; carriers Arelion, Cinia Oy, DNA, Elisa Carrier Business and Global Secure Layer
- DNA Oulu Torikatu (DNA Oyj), Torikatu 18, 90100 Oulu: 11 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane
Data Center Decommissioning by City
City pages for data center decommissioning in Finland:
- Helsinki: https://www.rebootmonkey.com/en/finland/helsinki/data-center-decommissioning/
- Espoo: https://www.rebootmonkey.com/en/finland/espoo/data-center-decommissioning/
Data Center Decommissioning in Finland: What We Deliver
Decommissioning in Finland covers servers, switches, storage arrays, and their cabling and rail kits. The scope follows the rack: when a device is removed, the cabling attached to it and the rail kit that held it come out with it, and every item is logged as it is removed.
On site, Reboot Monkey engineers disconnect and remove the equipment and record each item as it leaves the rack. The customer's asset list defines what is in scope, so the list is the first thing to prepare. The size of a job follows from the hardware on that list. Prices are quoted on request and depend on the customer and the size of the job.
Retired hardware that carries data is handled through IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. All of it is processed by Reboot Monkey staff, either in a partner's processing facility or on the customer's site. The customer chooses between those two places for the processing when the job is scoped.
Decommissioning sits beside other services in the same range that cover the work around a retirement project:
- Server migration moves equipment between racks, rooms or facilities, which applies to hardware that is being kept rather than retired.
- Rack and stack installs, mounts and cables new hardware, which applies when retired equipment is being replaced.
- Remote hands carries out physical tasks on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
- Smart hands covers technical work that needs diagnostic judgement and configuration knowledge.
Why Reboot Monkey for Data Center Decommissioning in Finland
Reboot Monkey sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. Decommissioning is therefore delivered the way the rest of the range is delivered: by engineers working inside a facility that someone else runs.
The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.
A second, briefed Reboot Monkey engineer is named as backup for every customer site. For a decommissioning project this means the customer has two named engineers attached to the site for the length of the work.
Cabling is part of the work in both directions. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When the rack is retired, the same cabling is inside the decommissioning scope and is logged with the rest of the equipment.
What the customer needs to have ready is short:
- The asset list for the hardware being retired, since serial numbers, asset tags and rack positions are recorded against it.
- Any out-of-hours or weekend window the facility requires for removal, so it can be scheduled in advance.
- A decision on whether data-bearing devices go through IT asset disposition, and whether processing takes place on the customer's site or in a partner's processing facility.
How Reboot Monkey Works
These terms apply in every facility in Finland where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Data sanitization and certificates
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
- NIST SP 800-88 data sanitization
- Certificate of Destruction issued per storage device processed
Data Center Decommissioning in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A decommissioning project that starts in Finland can therefore be one part of a larger programme in which hardware is retired at several sites.
The method does not change from site to site. At each location the customer's asset list is the reference, serial numbers, asset tags and rack positions are recorded against it, removal is scheduled in advance with any out-of-hours or weekend windows the facility requires, and every item is logged as it is removed. A customer retiring equipment in more than one place receives the same kind of record for each of them, which makes the results easy to compare with a single asset register.
Each customer site has its own named backup engineer, so a multi-site programme does not rely on one engineer's availability in any location. Scheduling is handled per site, because the windows a facility requires are set for that facility and are agreed with the customer before work begins there.
For retired hardware in France, see Data Center Decommissioning in France.
Processing of retired assets follows the customer's decision at each site. Data-bearing devices can be handled through IT asset disposition, with data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case. Prices are set per customer and per job, so a programme across several countries is scoped from the combined asset lists rather than from a fixed tariff.
Frequently Asked Questions
What does data center decommissioning cover in Finland?
In Finland, data center decommissioning covers the removal and disposal of retired hardware: servers, switches, storage arrays, and their cabling and rail kits. Reboot Monkey engineers record serial numbers, asset tags and rack positions against the customer's asset list and log every item as it is removed. Removal is scheduled in advance, including any out-of-hours or weekend windows the facility requires.
Do you work in every datacenter in Finland?
Reboot Monkey engineers work in any facility in Finland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Finland?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with data center decommissioning in Finland?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center decommissioning work is scheduled under the operator's rules.
Plan the removal of your retired hardware
Send the asset list and any windows the facility requires. Prices are quoted on request and depend on the customer and the size of the job.