Skip to content
Map of Finland: data centres as dots, the cities with a Reboot Monkey page highlighted: Helsinki

Map: Natural Earth

Rack and Stack

Server Racking in Finland

Server racking in Finland means installing, mounting and cabling new hardware in a data centre that another company owns and runs. Reboot Monkey engineers carry out the cabling, labelling and power-on checks in the customer's rack, and quotes are on request.

  • 9

    of our services in Finland

Choose your city

In depth

Rack and Stack: 8 sections, open any to read more.

Server Racking in Finland: How It Works

A server racking project in Finland begins with one decision: who installs the new hardware, and inside whose building. Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. Rack and stack is the service that covers installing, mounting and cabling new hardware.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Reboot Monkey engineers are dispatched to the data centre where the rack stands, and the installation is carried out there.

Hardware can come from the customer or be ordered through Reboot Monkey, which sells data-centre hardware as well as the services that install it. Either way, a request follows the same sequence:

The request is written from the customer's side. A request that names the target rack for each device lets the engineer mount and cable each device in the position the customer has planned, and a request that states the network requirement at the start gives Reboot Monkey time to order what the facility operator and the carriers must supply.

Rack and stack concerns new hardware. Equipment that already stands in a rack and has to move to another rack, room or facility falls under server migration, which is a separate service.

  • The customer describes the hardware to be installed, the rack it goes into and whether the rack needs network connections.
  • Reboot Monkey scopes the job and issues a quote.
  • A Reboot Monkey engineer is assigned to the site.
  • On site, the engineer mounts the hardware in the rack, cables it, labels the cabling and carries out power-on checks.
  • Where the order includes network, Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineer installs and patches the cabling in the customer's rack.

Datacenter Landscape in Finland

Data centres in Finland, ordered by the number of networks present:

  • Digita Helsinki Pasila Broadcasting Tower (Digita Oy), Radiokatu 5, Uutiskatu 5, Televisiokatu 2, 00240 Helsinki: 57 networks; carriers 31173 Services, Bahnhof, Cinia Oy, DNA, EXA Infrastructure and others
  • Equinix HE6 - Helsinki, Sinimäki (Equinix, Inc.), Sinimaentie 12, 02630 Espoo: 26 networks; carriers Arelion, Blix, Cinia Oy, DNA, Elisa Carrier Business and others
  • Telia Helsinki Datacenter (Telia Company), Valimotie 5, 00380 Helsinki: 26 networks; carriers Arelion, Bahnhof, Cinia Oy, DNA, Elisa Carrier Business and others
  • Innopoli (Technopolis), Tekniikantie 12, 02150 Espoo: 16 networks; carriers DNA, Elisa Carrier Business, RETN and euNetworks
  • Tampere Hallituskatu 14 (Lahtiset Yhtymä Oy), Hallituskatu 14, 33200 Tampere: 16 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane
  • LocalNet Lauttasaari (Nebula) (Local Loop Oy), Kiviaidankatu 2H, 00210 Helsinki: 14 networks; carriers Arelion and Elisa Carrier Business
  • Equinix HE7 - Helsinki, Sinimäki (Equinix, Inc.), Sinimäentie 8, 02630 Espoo: 13 networks; carriers Blix, Cinia Oy, DNA, Elisa Carrier Business, Global Secure Layer and others
  • Hetzner Online HEL1 (Helsinki) (Hetzner Online GmbH), Huurrekuja 10, 04360 Tuusula: 13 networks; carriers Cinia Oy, Core-Backbone, Elisa Carrier Business and aurologic GmbH
  • Equinix HE3 - Helsinki, Suvilahti (Equinix, Inc.), Parrukatu 2, 00540 Helsinki: 12 networks; carriers Arelion, Cinia Oy, DNA, Elisa Carrier Business and Global Secure Layer
  • DNA Oulu Torikatu (DNA Oyj), Torikatu 18, 90100 Oulu: 11 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane

Rack and Stack by City

City pages for rack and stack in Finland:

  • Helsinki: https://www.rebootmonkey.com/en/finland/helsinki/rack-and-stack/
  • Espoo: https://www.rebootmonkey.com/en/finland/espoo/rack-and-stack/

Server Racking in Finland: What We Deliver

Rack and stack work covers cabling, labelling and power-on checks; quotes are on request. Within that scope the engineer mounts each new device in the rack, cables it into the installation, labels the cabling and carries out the power-on checks. The result is hardware that is physically installed and has been switched on in its rack, ready for the customer's own configuration work.

The prerequisite for an installation is a rack to install into. A customer who already holds space names the rack in the request. A customer without space can order rack space from Reboot Monkey, which sells it inside data centres that other companies own and run. Reboot Monkey also sells IP transit and leased IP addresses, so the connection into the rack and the addresses used on it can come from the same supplier as the installation.

Where the installation includes optical connections, a fibre inspection scope and cleaning kit are available on request.

Rack and stack ends when the new hardware is installed, cabled, labelled and has been through its power-on checks. Work on the same hardware afterwards belongs to separate services, each defined by what the engineer does:

  • Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks).
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Server migration: moving equipment between racks, rooms or facilities.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey for Server Racking in Finland

Three points decide whether a rack and stack supplier fits a project in Finland: who carries out the work, what the work covers and how the job is quoted. Reboot Monkey answers each in operational terms.

The work is carried out by Reboot Monkey engineers in the data centre where the customer's rack stands. Reboot Monkey is not a hosting company, so no customer workload runs on a Reboot Monkey platform, and it does not own datacenters, so the installation is delivered in whichever building holds the rack. A second, briefed Reboot Monkey engineer is named as backup for every customer site, which means a rack and stack job has a named engineer and a named backup for the site where the hardware is installed.

The scope is cabling, labelling and power-on checks around the mounting of new hardware. The same scope works as the handover checklist: the customer can compare the finished rack with the request and look at whether each device sits in the planned position, whether the cabling matches what was ordered, whether the labelling is present and whether the devices have been through their power-on checks.

Prices are quoted on request and depend on the customer and the size of the job. A procurement manager comparing suppliers can set the quote against the scope Reboot Monkey states for the service and ask which items in the request each line of the quote covers.

A complete request for quotation contains the following:

  • The list of devices to be installed, because the size of the job follows from the hardware.
  • The target rack for each device, or a request for rack space from Reboot Monkey where no rack exists yet.
  • The network requirement, so that cross connects and carrier circuits can be ordered from the facility operator and the carriers present in the facility.
  • The cabling expected between devices, so that the engineer installs and patches it in the rack as planned.

How Reboot Monkey Works

These terms apply in every facility in Finland where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Rack and Stack

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Rack and Stack in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A team planning a matching installation in France can request it through Rack and Stack in France.

A rollout that spans several countries is made up of separate site jobs. Each site has its own hardware list, its own rack and its own network requirement, and the cross connects and carrier circuits for each site are ordered from the facility operator and the carriers present there. Cabling, labelling and power-on checks are carried out in each rack. Because a backup engineer is named for every customer site, each site in the rollout has its own named engineer and backup rather than sharing one pair.

Moving equipment that is already in service is a different job from installing new hardware. Moving equipment between racks, rooms or facilities is server migration, and removing and disposing of retired hardware is data center decommissioning. In a refresh project that replaces old hardware with new, the new hardware is rack and stack, and the removal of the old hardware is separate work with its own definition.

For a customer whose equipment is spread over several countries, the useful question when writing a request is which sites receive new hardware. Those sites are the rack and stack sites. Sites where hardware only moves, or where it is retired, are handled by the other services, and the requests for them are scoped separately. Where the customer wants the new servers and network equipment watched once they are running, hardware monitoring by the Reboot Monkey NOC is the service for that.

A phased rollout can therefore be planned site by site. The customer lists the hardware and the rack for the first site, receives a quote, and repeats the same request format for each further site, in Finland or in another country.

Frequently Asked Questions

What does rack and stack cover in Finland?

Rack and stack in Finland covers installing, mounting and cabling new hardware in a rack. The work includes cabling, labelling and power-on checks. Where the order includes network, Reboot Monkey orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and its engineers install and patch the cabling in the customer's rack.

Do you work in every datacenter in Finland?

Reboot Monkey engineers work in any facility in Finland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Finland?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with rack and stack in Finland?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the rack and stack work is scheduled under the operator's rules.

Request a Rack and Stack Quote

Send the hardware list, the target rack and the network requirement for your site in Finland, and Reboot Monkey will scope the job and quote it.

Published:

Get a quote