Skip to content
Map of Finland: data centres as dots, the cities with a Reboot Monkey page highlighted: Helsinki

Map: Natural Earth

Data Center Migration

Data Center Migration in Finland

Data center migration in Finland is the physical move of IT equipment between racks, rooms or facilities. Reboot Monkey engineers carry out the move inside buildings that other companies own and run, either as the whole project or alongside the customer's own team.

  • 9

    of our services in Finland

Choose your city

In depth

Data Center Migration: 8 sections, open any to read more.

Data Center Migration in Finland: How It Works

A data center migration in Finland is a physical project. Equipment leaves one rack, room or facility and is installed, cabled and tested in another. Reboot Monkey carries out that work as a third-party datacenter services operator: it sells rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. A migration plan covers the source and the destination, which may be two racks in one room or two different facilities.

Every migration request starts the same way, whatever the size of the move. The customer describes the move and states which equipment is to be moved, and Reboot Monkey scopes the work from that description. The description names the buildings the equipment is leaving and entering and, where racks are involved, the rack positions on each side. Prices are quoted on request and depend on the customer and the size of the job.

The second decision is who does what. Reboot Monkey can run the whole physical move or work alongside the customer's own team; who disconnects, reconnects and tests the equipment is agreed per project, so the arrangement can differ from one project to the next. Both arrangements start from the same request and the split of work is part of the scope.

For a CTO or IT Director the useful output of this first exchange is a scope that names the equipment, the source, the destination and the division of work between Reboot Monkey and the customer's team. That scope is the basis for the quote.

Once the scope is agreed, Reboot Monkey engineers are dispatched to the customer's facility to carry out their part of the work. The engineers work on the equipment itself, moving it between racks, rooms or facilities and handling the cabling that connects it.

Datacenter Landscape in Finland

Data centres in Finland, ordered by the number of networks present:

  • Digita Helsinki Pasila Broadcasting Tower (Digita Oy), Radiokatu 5, Uutiskatu 5, Televisiokatu 2, 00240 Helsinki: 57 networks; carriers 31173 Services, Bahnhof, Cinia Oy, DNA, EXA Infrastructure and others
  • Equinix HE6 - Helsinki, Sinimäki (Equinix, Inc.), Sinimaentie 12, 02630 Espoo: 26 networks; carriers Arelion, Blix, Cinia Oy, DNA, Elisa Carrier Business and others
  • Telia Helsinki Datacenter (Telia Company), Valimotie 5, 00380 Helsinki: 26 networks; carriers Arelion, Bahnhof, Cinia Oy, DNA, Elisa Carrier Business and others
  • Innopoli (Technopolis), Tekniikantie 12, 02150 Espoo: 16 networks; carriers DNA, Elisa Carrier Business, RETN and euNetworks
  • Tampere Hallituskatu 14 (Lahtiset Yhtymä Oy), Hallituskatu 14, 33200 Tampere: 16 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane
  • LocalNet Lauttasaari (Nebula) (Local Loop Oy), Kiviaidankatu 2H, 00210 Helsinki: 14 networks; carriers Arelion and Elisa Carrier Business
  • Equinix HE7 - Helsinki, Sinimäki (Equinix, Inc.), Sinimäentie 8, 02630 Espoo: 13 networks; carriers Blix, Cinia Oy, DNA, Elisa Carrier Business, Global Secure Layer and others
  • Hetzner Online HEL1 (Helsinki) (Hetzner Online GmbH), Huurrekuja 10, 04360 Tuusula: 13 networks; carriers Cinia Oy, Core-Backbone, Elisa Carrier Business and aurologic GmbH
  • Equinix HE3 - Helsinki, Suvilahti (Equinix, Inc.), Parrukatu 2, 00540 Helsinki: 12 networks; carriers Arelion, Cinia Oy, DNA, Elisa Carrier Business and Global Secure Layer
  • DNA Oulu Torikatu (DNA Oyj), Torikatu 18, 90100 Oulu: 11 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane

Data Center Migration by City

City pages for data center migration in Finland:

  • Helsinki: https://www.rebootmonkey.com/en/finland/helsinki/data-center-migration/
  • Espoo: https://www.rebootmonkey.com/en/finland/espoo/data-center-migration/

Data Center Migration in Finland: What We Deliver

Server migration is the core service, and a migration project can draw on any of the other services Reboot Monkey delivers for a move in Finland, added to the move as the project requires:

In a migration these services fall into a sequence. New hardware that arrives with the move is installed through rack and stack. Once equipment is running in its new location, small follow-up tasks such as a cable check or a visual check are remote hands work on the customer's instruction, while anything that needs diagnosis or configuration is smart hands work. Hardware that is not moving is handled by data center decommissioning, and ITAD applies when the retired devices carry data that must be wiped, shredded or degaussed, or when resale or buyback is being considered. After the move, hardware monitoring lets the Reboot Monkey NOC watch the customer's servers and network equipment from the new location.

A moved server is only useful once it is connected. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. Connectivity therefore belongs in the scope of the move from the start, because the cross connects and circuits are ordered from parties outside Reboot Monkey.

Where the destination needs IP transit or leased IP addresses, these are sold by Reboot Monkey and can be requested as part of the same project.

  • Rack and stack: installing, mounting and cabling new hardware at the destination.
  • Remote hands: physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks.
  • Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
  • Data center decommissioning: removing and disposing of retired hardware.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.

Why Reboot Monkey for Data Center Migration in Finland

A second, briefed Reboot Monkey engineer is named as backup for every customer site, which in a migration means both the site the equipment leaves and the site it enters.

Because the destination capacity, the connectivity into it and the physical move are all things Reboot Monkey sells or delivers, they can be raised with one supplier in a single request. A procurement manager can ask for one scope covering rack space, IP transit, leased IP addresses and network where the project needs them, together with the move itself.

The division of work can take several forms, and the form is agreed for each project, not fixed in advance. In one arrangement Reboot Monkey runs the whole physical move, so Reboot Monkey engineers disconnect, move, reconnect and test the equipment. In another the customer's own team disconnects and tests while Reboot Monkey engineers carry out the physical move and the cabling at the destination. In a third, the customer's team keeps only the testing.

Procurement can use these arrangements to compare like with like. Each one has the same ingredients: a described set of equipment, a source and a destination, a named division of work and a quote issued on request. Where a project spans several buildings, the same ingredients are described for each building.

After the move, remote hands tasks continue on the customer's instruction and smart hands work covers anything that needs diagnosis or configuration, so the relationship that carried the migration also carries the support of the equipment in its new location.

Five items prepared before the first request make the scope easier to write:

  • A list of the equipment, with each item marked as moving, being replaced or being retired.
  • The connectivity each moved system needs in its new location, so that cross connects and carrier circuits can be ordered.
  • The tasks the customer's own team will keep, such as disconnecting, reconnecting or testing.
  • Whether the servers and network equipment should be monitored once they are running in the new location.
  • Whether new hardware is arriving with the move and needs installing at the destination.

How Reboot Monkey Works

These terms apply in every facility in Finland where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Data Center Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Data Center Migration in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Data center migration in Finland follows the same method wherever the equipment stands: a described move, a scope, an agreed division of work and engineers dispatched to the customer's facility.

A customer whose project also involves equipment in France can request Data Center Migration in France in the same way, with the same questions about equipment, division of work and connectivity.

A project that spans two countries is planned as two sets of work under one scope. Each location is scoped on its own description of the move. Each has its own source or destination building, so the cross connects and carrier circuits for that location are ordered from the operator and the carriers present in that building. The division of work between Reboot Monkey and the customer's team is agreed per project and can differ between locations.

Because the work is carried out by field engineers dispatched to the customer's facility, the request starts with the location of the equipment and the work is organised around it. That applies equally to a single rack and to a project with several sites.

What carries across borders is the structure of the request, not the building: the equipment list, the source and destination and the division of work stay the same, while the building and the carriers present differ. A project that includes Finland and other locations is requested in the same way, and the first conversation covers the equipment, the move, the division of work and the connectivity.

A project with locations in Finland and elsewhere raises a sequencing question: whether the equipment at the source is retired once it has been moved. Whether old hardware is retired or reused is the customer's decision. Retirement connects the migration to data center decommissioning, which removes and disposes of retired hardware, and to ITAD, where devices are wiped, shredded or degaussed, collected and transported, or resold or bought back as quoted case by case. Both are services of their own, separate from the move itself.

Frequently Asked Questions

What does data center migration cover in Finland?

Data center migration in Finland covers the physical move of equipment between racks, rooms or facilities. Reboot Monkey can run the whole physical move or work alongside the customer's own team, and who disconnects, reconnects and tests the equipment is agreed per project. Related services such as rack and stack, remote hands, smart hands, decommissioning, ITAD and hardware monitoring can be added.

Do you work in every datacenter in Finland?

Reboot Monkey engineers work in any facility in Finland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Finland?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with data center migration in Finland?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the data center migration work is scheduled under the operator's rules.

Plan your data center migration in Finland

Describe the equipment, the source and the destination, and Reboot Monkey will scope the move with you.

Published:

Get a quote