Map: Natural Earth
Remote Hands
Data Centre Remote Hands in Finland
Data centre remote hands in Finland means Reboot Monkey engineers are dispatched to your rack to carry out physical tasks on your instruction, including reboots, cable checks, component swaps and visual checks, inside data centres that other companies own and run.
9
of our services in Finland
Choose your city

Photo: Markus Säynevirta · CC BY-SA 4.0 · cropped · source
Espoo
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands

Photo: Ввласенко · CC BY-SA 3.0 · source
Helsinki
- Remote Hands
- Colocation
- Data Center Decommissioning
- Data Center Migration
- Rack and Stack
- Server Migration
- Smart Hands
Services in Remote Hands
In depth
Remote Hands: 9 sections, open any to read more.
Data Centre Remote Hands in Finland: How It Works
Remote hands is the work that needs a person at the rack when the customer's own staff are somewhere else. For equipment placed in Finland, Reboot Monkey carries it out as physical tasks on the customer's instruction: reboots, cable checks, component swaps and visual checks. The customer decides what is to be done, and the engineer does exactly that at the rack.
A request starts with the instruction. A useful instruction names the device and its position in the rack, states the action to be taken, and says what should happen if the situation at the rack differs from the description. For a reboot, that can mean stating whether the device should be restarted on sight or only after a visual check of its status. For a cable check, it means naming both ends of the link.
Work that turns out to need diagnostic judgement or configuration knowledge is smart hands, not remote hands. Stating the likely scope when the request is made lets it be handled as the right kind of task from the start. Reboot Monkey engineers are dispatched to the customer's site for the work, and a second, briefed Reboot Monkey engineer is named as backup for every customer site.
The building itself is not part of the instruction. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules. Instructions therefore describe work on the customer's own equipment and cabling.
Because the customer keeps control of what is done, remote hands suits tasks that are routine and well understood: a device that has stopped responding and needs a restart, a cable that needs to be checked, a failed component with a replacement already on site, or a visual check of status indicators that the customer cannot read remotely.
Datacenter Landscape in Finland
Data centres in Finland, ordered by the number of networks present:
- Digita Helsinki Pasila Broadcasting Tower (Digita Oy), Radiokatu 5, Uutiskatu 5, Televisiokatu 2, 00240 Helsinki: 57 networks; carriers 31173 Services, Bahnhof, Cinia Oy, DNA, EXA Infrastructure and others
- Equinix HE6 - Helsinki, Sinimäki (Equinix, Inc.), Sinimaentie 12, 02630 Espoo: 26 networks; carriers Arelion, Blix, Cinia Oy, DNA, Elisa Carrier Business and others
- Telia Helsinki Datacenter (Telia Company), Valimotie 5, 00380 Helsinki: 26 networks; carriers Arelion, Bahnhof, Cinia Oy, DNA, Elisa Carrier Business and others
- Innopoli (Technopolis), Tekniikantie 12, 02150 Espoo: 16 networks; carriers DNA, Elisa Carrier Business, RETN and euNetworks
- Tampere Hallituskatu 14 (Lahtiset Yhtymä Oy), Hallituskatu 14, 33200 Tampere: 16 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane
- LocalNet Lauttasaari (Nebula) (Local Loop Oy), Kiviaidankatu 2H, 00210 Helsinki: 14 networks; carriers Arelion and Elisa Carrier Business
- Equinix HE7 - Helsinki, Sinimäki (Equinix, Inc.), Sinimäentie 8, 02630 Espoo: 13 networks; carriers Blix, Cinia Oy, DNA, Elisa Carrier Business, Global Secure Layer and others
- Hetzner Online HEL1 (Helsinki) (Hetzner Online GmbH), Huurrekuja 10, 04360 Tuusula: 13 networks; carriers Cinia Oy, Core-Backbone, Elisa Carrier Business and aurologic GmbH
- Equinix HE3 - Helsinki, Suvilahti (Equinix, Inc.), Parrukatu 2, 00540 Helsinki: 12 networks; carriers Arelion, Cinia Oy, DNA, Elisa Carrier Business and Global Secure Layer
- DNA Oulu Torikatu (DNA Oyj), Torikatu 18, 90100 Oulu: 11 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane
Remote Hands by City
City pages for remote hands in Finland:
- Helsinki: https://www.rebootmonkey.com/en/finland/helsinki/remote-hands/
- Espoo: https://www.rebootmonkey.com/en/finland/espoo/remote-hands/
Data Centre Remote Hands in Finland: What We Deliver
Reboot Monkey delivers on-site IT support in Finland data centers as a set of defined services. Each has its own boundary, and each request is matched to one of them when it is made, so the scope of the work is clear to both sides before an engineer is dispatched.
- Remote hands: the instructed physical tasks at the rack.
- Smart hands: technical work that needs diagnostic judgement and configuration knowledge.
- Rack and stack: installing, mounting and cabling new hardware.
- Server migration: moving equipment between racks, rooms or facilities.
- Data center decommissioning: removing and disposing of retired hardware.
- IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
- Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC.
Importance of Remote Hands in Finland
Servers and network equipment in a data centre in Finland still need hands-on attention from time to time, and the customer's staff are not always able to be there. Remote hands covers that need: a Reboot Monkey engineer performs the physical step, and the customer keeps the decision about what is done.
Network work is the clearest example. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When a link needs attention later, a cable check at the rack is a remote hands task.
A fibre inspection scope and cleaning kit are available on request, so an instruction that involves a fibre link can ask for them to be used as part of the check.
Component swaps and visual checks follow the same pattern as reboots and cable checks. The customer instructs, the engineer works at the rack, and the equipment stays in the customer's own rack.
The same logic applies beyond single tasks. When equipment has to move between racks, rooms or facilities, the work is server migration, and when new hardware arrives, it is rack and stack. Remote hands covers the smaller physical steps around these projects, such as a visual check before a move or a cable check after one.
For a buyer, the importance of remote hands comes down to whether a task needs a person at the rack at all. Monitoring by the Reboot Monkey NOC is the observation of servers and network equipment. Remote hands is what has to be done by hand once something is known to need it.
Why Reboot Monkey for Data Centre Remote Hands in Finland
Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company, and it does not own datacenters.
For a buyer of remote hands in Finland, that positioning sets the scope. The engineer at the rack works for the same operator that can sell the rack space, the transit and the hardware, and that same operator installs, migrates and retires the hardware. Installation, support, migration and retirement are separate services, each with its own definition, and a customer orders the ones the situation calls for.
Remote hands depends on the customer's instruction, so the content of the request shapes the work. Prices are quoted on request and depend on the customer and the size of the job. A request that states the equipment, the task and the site gives enough detail for the size of the job to be assessed.
The instruction remains the trigger for every remote hands task. Reboot Monkey engineers carry out what was asked on the customer's equipment and cabling, and work that needs judgement about what is wrong is handled as smart hands.
Before ordering, a procurement manager can settle three questions: which service the task belongs to, what the instruction has to contain, and how the job is quoted. The service definitions answer the first, the equipment, action and site answer the second, and the quote on request answers the third.
How Reboot Monkey Works
These terms apply in every facility in Finland where Reboot Monkey engineers work.
- Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
- Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
- Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
- Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
- One agreement: single provider across cities, so a customer in several cities needs only one agreement.
- Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
- Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan
Remote Hands
The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.
Remote Hands in Other Countries
As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. That reach is relevant to customers whose equipment is spread across more than one country.
Customers who also run equipment in France can arrange remote hands there through Remote Hands in France.
Estates that span several sites raise a different kind of request. Moving equipment between facilities is server migration. A move between two facilities involves physical work at both ends: the equipment is taken out at one site, and installed, mounted and cabled at the other, which is rack and stack. Retiring the equipment left behind is data center decommissioning. Each of these is scoped as its own request with its own instruction, even when they belong to one project.
Smaller tasks keep their usual pattern at either end of a move. A visual check or a cable check before equipment leaves, and again once it is in place, is remote hands: the customer instructs, and a Reboot Monkey engineer carries it out.
For customers with several sites, the useful preparation is a short list per site: the equipment concerned, the tasks that may be needed, and the kind of service each one belongs to. Requests made against such a list can be matched to remote hands, smart hands or one of the project services without describing the equipment again each time.
Frequently Asked Questions
What does remote hands cover in Finland?
Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. Reboot Monkey engineers are dispatched to the customer's site to do the work. Technical work that needs diagnostic judgement and configuration knowledge is smart hands, and installing, mounting and cabling new hardware is rack and stack. Each request is scoped when it is made.
Do you provide on-site IT support in Finland data centers?
Yes. Reboot Monkey engineers are dispatched to the customer's data centre in Finland and work on site at the rack. Physical tasks fall under remote hands, and work that needs diagnostic judgement and configuration knowledge falls under smart hands. A request starts with the customer's instruction, naming the equipment and the action required, and the engineer carries it out as instructed.
Do you work in every datacenter in Finland?
Reboot Monkey engineers work in any facility in Finland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.
How fast can Reboot Monkey respond in Finland?
Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
How is Reboot Monkey different from the facility operator's own staff?
Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.
How do I get started with remote hands in Finland?
Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the remote hands work is scheduled under the operator's rules.
Request Remote Hands in Finland
Describe the equipment, the task and the site, and Reboot Monkey will respond with a quote.