Skip to content
Map of Finland: data centres as dots, the cities with a Reboot Monkey page highlighted: Helsinki

Map: Natural Earth

ITAD

ITAD in Finland: IT Asset Disposition for Retired Hardware

ITAD in Finland covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of equipment that can be used again. Reboot Monkey staff process the hardware in a partner's processing facility or on the customer's site.

  • 9

    of our services in Finland

In depth

ITAD: 7 sections, open any to read more.

ITAD in Finland: How It Works

An ITAD request in Finland starts with three decisions about the retired hardware: which assets are leaving service, where their storage media should be handled, and whether any of the equipment can be used again. The job is scoped around those decisions, because they determine whether the work is collection and transport alone, collection with data wiping, physical destruction of the storage media, or any of these combined with resale or buyback.

Reboot Monkey collects the retired hardware at the customer's site or data centre and transports it for processing. The processing is carried out by Reboot Monkey staff, either in a partner's processing facility or on the customer's own site. The choice between the two is part of the scope the customer sets when the request is made.

The two places differ in practice. When processing takes place in a partner's processing facility, the hardware leaves the customer's premises after collection and is handled there by Reboot Monkey staff. When processing takes place on the customer's site, storage media can be destroyed physically by shredding or degaussing, and the destruction happens on the customer's own premises.

Storage media are the drives inside servers, storage systems and similar equipment, and they are the part of retired hardware that carries the customer's data. That is why most of the decisions in an ITAD request concern them. The scope of a job in Finland can combine the following elements, each chosen per request:

  • Collection and transport of retired hardware from the customer's site or data centre.
  • Data wiping of storage media.
  • Physical destruction of storage media by shredding or degaussing on the customer's site.
  • Resale or buyback of equipment that can be used again, quoted case by case.

E-waste Rules in Finland

In Finland, electronic waste falls under the Government Decree on Waste Electrical and Electronic Equipment (519/2014). For an IT team retiring hardware, that decree is the regulatory reference for equipment that has reached the end of its life and is not going to be put back into use. The decree sets the framework, and the physical handling of the equipment is arranged separately, through the ITAD request.

Retired IT hardware does not all end up in the same place. Equipment that can be used again can go to resale or buyback, which Reboot Monkey quotes case by case. Equipment that is collected for processing is transported to a partner's processing facility, where Reboot Monkey staff process it. Separating the two groups is the first thing a request has to do, because it decides which equipment is treated as a recoverable asset and which is handled as end-of-life hardware.

Collection is the step that moves the hardware out of the customer's custody. Collection and transport belong to the same service as the processing, so the request covers the whole route from the customer's rack to the processing location. The place of collection is stated per request: the customer's site, or a data centre where the customer's equipment is installed.

Reuse is the part of ITAD where the outcome is not fixed in advance. Whether a given piece of equipment can be used again is established case by case, and the resale or buyback offer is quoted case by case as well. The equipment list and the quote are therefore settled together, before collection takes place. A request for a Finnish site normally needs these points defined:

  • Which hardware is retired, and where it is located.
  • Which equipment can be used again and is a candidate for resale or buyback.
  • Which equipment is to be processed in a partner's processing facility.
  • Which storage media are to be destroyed on the customer's site.

Personal Data on Retired Drives in Finland

In Finland, personal data on retired drives falls under the General Data Protection Regulation (Regulation (EU) 2016/679), overseen by the Office of the Data Protection Ombudsman (Tietosuojavaltuutetun toimisto). A drive that leaves service still holds whatever the customer stored on it, and a retired drive does not stop being a data-bearing device because the server it came from has been unracked. The retirement of a server or storage system is therefore also a decision about the data on its drives.

Reboot Monkey handles the storage media in one of the ways its ITAD service provides. Data wiping is applied to the storage media. Where the customer wants the media physically destroyed, shredding or degaussing can be carried out on the customer's site. In each case the work is processed by Reboot Monkey staff, in a partner's processing facility or on the customer's site.

The choice between wiping and destruction belongs to the customer and is made in the request. Physical destruction ends the life of a storage medium, so it applies to media that will not be used again. Equipment that can be used again is the equipment that goes to resale or buyback, and the request states which devices fall into that group before any work begins.

Where the destruction takes place is part of the same decision. On the customer's site, the media are destroyed by shredding or degaussing on the customer's own premises. In a partner's processing facility, the media arrive after transport and are processed by Reboot Monkey staff there. The customer states which location applies to the storage media, and Reboot Monkey staff carry out the physical handling, whether that is wiping, shredding or degaussing.

For a data protection lead or an IT director, the practical questions to settle for each retired estate are short:

  • Which retired servers and storage systems carry personal data on their drives.
  • Whether those media are to be wiped or physically destroyed.
  • Whether destruction is to take place on the customer's site or after transport.

How Collection and Destruction Work

A request begins with the customer's instruction to Reboot Monkey. It describes the hardware to be retired, its location, and the handling wanted for storage media and for any equipment that can be used again. Prices are quoted on request and depend on the customer and the size of the job. From that instruction the job follows a fixed sequence:

  • Collection: Reboot Monkey collects the retired hardware at the customer's site or data centre.
  • Transport: the collected hardware is transported for processing.
  • Processing: Reboot Monkey staff process it in a partner's processing facility or on the customer's site.
  • Destruction: on the customer's site, storage media can be destroyed physically by shredding or degaussing.
  • Resale or buyback: equipment that can be used again is quoted case by case.

Why Reboot Monkey for ITAD in Finland

Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them. ITAD is the service at the end of that hardware lifecycle: rack and stack installs, mounts and cables new hardware, server migration moves equipment between racks, rooms or facilities, remote hands and smart hands support it while it runs, and hardware monitoring by the Reboot Monkey NOC watches the customer's servers and network equipment.

When equipment is retired, data center decommissioning removes and disposes of the hardware, and ITAD handles the storage media and the resale or buyback of what can be used again. A customer who already works with Reboot Monkey on the earlier stages deals with the same operator at the last one.

Continuity on site is covered in a specific way. A second, briefed Reboot Monkey engineer is named as backup for every customer site, so a collection or an on-site destruction job does not depend on a single person being available.

On reach, the coverage fact reads as follows: as of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations.

For a CTO, an IT director or a procurement manager in Finland, the starting point is a short description of the hardware to be retired, where it stands, and how its storage media should be handled. Resale or buyback is quoted case by case, and the rest of the job is quoted on request according to the customer and the size of the work.

How Reboot Monkey Handles IT Asset Disposition

These terms apply to IT asset disposition in Finland.

  • Where the work is done: the processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case.
  • Resale and buyback: reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case.

Data sanitization and certificates

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site. Our ITAD partner's sites include facilities certified to ISO 9001, ISO 14001, ISO/IEC 27001 and ISO 45001. Ask us for the certificate of the site that handles your job.

  • NIST SP 800-88 data sanitization
  • Certificate of Destruction issued per storage device processed

Frequently Asked Questions

What does IT asset disposition cover in Finland?

IT asset disposition in Finland covers the end-of-life handling of a customer's IT hardware: collection and transport, data wiping or physical destruction of the storage media, and resale or buyback of the equipment that can be used again. Shredding or degaussing can take place on the customer's site. Electronic waste falls under Decree 519/2014, and personal data on retired drives under the GDPR.

Where does Reboot Monkey process retired hardware in Finland?

The processing is done by Reboot Monkey's own staff, in a partner's processing facility or on the customer's site, agreed case by case. The customer and Reboot Monkey settle which of the two applies before the job is scheduled, and the collection and transport of the hardware are arranged with the customer.

Can retired hardware be resold or bought back in Finland?

Yes. Reusable hardware can be resold through Reboot Monkey's procurement desk or bought back, quoted case by case. Send the list of the hardware, with models and quantities, through the contact form, and Reboot Monkey replies with what can be resold or bought back.

How do I get a quote for IT asset disposition in Finland?

Prices are quoted on request and depend on the customer and the size of the job. Send the site, the list of the hardware and whether storage media must be destroyed on site through the contact form, and Reboot Monkey replies with a quote for the job.

Plan the retirement of your hardware in Finland

Describe the hardware, its location and the handling you want for storage media. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote