Skip to content
Map of Finland: data centres as dots, the cities with a Reboot Monkey page highlighted: Helsinki

Map: Natural Earth

Server Migration

Server Migration in Finland

Server migration in Finland is the physical movement of servers and network equipment between racks, rooms or facilities. Reboot Monkey engineers are dispatched to the customer's facility and can run the whole move or work alongside the customer's own team, with the division of work agreed per project.

  • 9

    of our services in Finland

Choose your city

In depth

Server Migration: 8 sections, open any to read more.

Server Migration in Finland: How It Works

Server migration is the movement of equipment between racks, rooms or facilities. In Finland, Reboot Monkey carries out that movement physically: engineers are dispatched to the customer's facility, take the servers and network equipment from their current position and place them in the new one. The destination can be another position in the same room, another room or another facility, and the request is handled in the same order for all three.

Reboot Monkey is a third-party datacenter services operator. It sells rack space, IP transit, leased IP addresses, network, data-centre hardware and the services that deliver, install and support them, inside data centres that other companies own and run. It is not a hosting company and it does not own datacenters. The equipment being moved is the customer's own; Reboot Monkey does not substitute a hosted platform for it.

The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

A migration request is handled in the following order, from the first description of the equipment to the test after reconnection.

  • Scope. The customer states which servers and network equipment are moving, where they sit today and where they are going. Quantities and the order in which equipment moves belong to the scope as well.
  • Division of work. The customer and Reboot Monkey divide the work between them before the move takes place.
  • Network at the destination. Reboot Monkey orders the cross connects and carrier circuits from the facility operator and from the carriers present in the facility.
  • Physical move. Reboot Monkey engineers carry out the work that falls to them under the agreed split.
  • Testing. The party named for testing checks the equipment once it is reconnected.

Datacenter Landscape in Finland

Data centres in Finland, ordered by the number of networks present:

  • Digita Helsinki Pasila Broadcasting Tower (Digita Oy), Radiokatu 5, Uutiskatu 5, Televisiokatu 2, 00240 Helsinki: 57 networks; carriers 31173 Services, Bahnhof, Cinia Oy, DNA, EXA Infrastructure and others
  • Equinix HE6 - Helsinki, Sinimäki (Equinix, Inc.), Sinimaentie 12, 02630 Espoo: 26 networks; carriers Arelion, Blix, Cinia Oy, DNA, Elisa Carrier Business and others
  • Telia Helsinki Datacenter (Telia Company), Valimotie 5, 00380 Helsinki: 26 networks; carriers Arelion, Bahnhof, Cinia Oy, DNA, Elisa Carrier Business and others
  • Innopoli (Technopolis), Tekniikantie 12, 02150 Espoo: 16 networks; carriers DNA, Elisa Carrier Business, RETN and euNetworks
  • Tampere Hallituskatu 14 (Lahtiset Yhtymä Oy), Hallituskatu 14, 33200 Tampere: 16 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane
  • LocalNet Lauttasaari (Nebula) (Local Loop Oy), Kiviaidankatu 2H, 00210 Helsinki: 14 networks; carriers Arelion and Elisa Carrier Business
  • Equinix HE7 - Helsinki, Sinimäki (Equinix, Inc.), Sinimäentie 8, 02630 Espoo: 13 networks; carriers Blix, Cinia Oy, DNA, Elisa Carrier Business, Global Secure Layer and others
  • Hetzner Online HEL1 (Helsinki) (Hetzner Online GmbH), Huurrekuja 10, 04360 Tuusula: 13 networks; carriers Cinia Oy, Core-Backbone, Elisa Carrier Business and aurologic GmbH
  • Equinix HE3 - Helsinki, Suvilahti (Equinix, Inc.), Parrukatu 2, 00540 Helsinki: 12 networks; carriers Arelion, Cinia Oy, DNA, Elisa Carrier Business and Global Secure Layer
  • DNA Oulu Torikatu (DNA Oyj), Torikatu 18, 90100 Oulu: 11 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane

Server Migration by City

City pages for server migration in Finland:

  • Helsinki: https://www.rebootmonkey.com/en/finland/helsinki/server-migration/
  • Espoo: https://www.rebootmonkey.com/en/finland/espoo/server-migration/

Server Migration in Finland: What We Deliver

Server migration is delivered as physical work on the customer's equipment, and it can be combined with the other Reboot Monkey services when a move needs them. The following parts make up the delivery.

  • Cabling. Reboot Monkey engineers install and patch the cabling in the customer's rack. This is the work that reconnects the relocated equipment once it is in place and ready to be tested.
  • Network for the rack. Reboot Monkey sells the network for the rack, so a destination that needs IP transit or leased IP addresses can have them arranged together with the move.
  • New hardware. Hardware that is new to the project is installed, mounted and cabled as rack and stack work, alongside the equipment that is being relocated.
  • Physical tasks on instruction. Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks.
  • Technical work. Smart hands covers technical work that needs diagnostic judgement and configuration knowledge, for the cases where a relocated server needs more than a physical task.
  • Retired equipment. Where a migration leaves hardware behind that is no longer needed, data center decommissioning covers removing and disposing of that retired hardware.
  • Monitoring. Hardware monitoring is monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. It can cover the equipment at its new location once the move is done.

Why Reboot Monkey for Server Migration in Finland

A migration decision rests on a few concrete questions: who performs each task, who covers if the engineer named for the work is unavailable, and how the cost is established. These questions come up for a CTO, an IT director and a procurement manager alike, each from a different side. The answers are operating facts.

Who performs each task. Reboot Monkey can run the whole physical move or work alongside the customer's own team. In the first arrangement Reboot Monkey engineers take all the physical steps in the scope. In the second, the customer's team takes some of them, for example the disconnection or the testing, and Reboot Monkey engineers take the rest. Who disconnects, reconnects and tests the equipment is agreed per project, so each party knows its steps before the work starts. This matters for scheduling as much as for responsibility: a project in which Reboot Monkey runs everything has one team on the floor, while a project in which the customer's team disconnects and tests has two teams whose steps must meet at the handover.

Who covers for the named engineer. A second, briefed Reboot Monkey engineer is named as backup for every customer site, not only for large projects. For a migration project this means the work does not depend on a single person being available on the day.

How the cost is established. Prices are quoted on request and depend on the customer and the size of the job. A figure for a single rack and a figure for a larger relocation are therefore not interchangeable, and a quote starts from the equipment list and the locations, the same information that defines the scope.

Together these give the person who signs off the project a short list to confirm: the equipment and its locations, the split of work, the network needed at the destination and the quote. The decisions are the customer's; Reboot Monkey supplies the physical work and the connectivity around them.

How Reboot Monkey Works

These terms apply in every facility in Finland where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Server Migration

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Server Migration in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. Server migration is defined in the same way wherever a project is requested: moving equipment between racks, rooms or facilities.

If part of the equipment sits in France, that part of the move is requested through Server Migration in France, with its own scope.

Multi-location projects take a few forms. Equipment may leave one site and arrive at another, a site may be emptied while its equipment is placed in several destinations, or equipment from several rooms may be gathered into one. In each form, every location involved is a position the equipment leaves or arrives at, and each has to be described in the request.

When a project covers more than one country, each location is scoped on its own: the equipment that moves, its current and target positions, the network needed at the destination and the split of work between Reboot Monkey and the customer's team. The order in which the locations are handled is part of the scope agreed with the customer.

For the customer's planning, the useful unit is the location, not the country. A project that moves equipment inside Finland and a project that moves equipment inside another country are two projects with the same structure: an inventory, two positions for each item, a connectivity requirement and an agreed split of work.

Where one customer has projects in several countries, the same questions are asked at each location and the answers are given per location. Differences between locations, such as a destination that needs new rack space where another only needs a new position in the same rack, show up in the scope rather than in the process.

A customer that plans a move in Finland first and a second move elsewhere later can use the first project as the template for the second: the same inventory, the same split of work and the same connectivity questions apply. Reboot Monkey scopes the second project as it scopes the first, location by location.

Frequently Asked Questions

What does server migration cover in Finland?

Server migration covers the movement of equipment between racks, rooms or facilities. Reboot Monkey engineers are dispatched to the customer's facility and either run the whole physical move or work alongside the customer's own team. Who disconnects, reconnects and tests is agreed per project. Reboot Monkey orders the cross connects and carrier circuits for the destination and its engineers install and patch the cabling in the customer's rack.

Do you work in every datacenter in Finland?

Reboot Monkey engineers work in any facility in Finland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Finland?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with server migration in Finland?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the server migration work is scheduled under the operator's rules.

Plan Your Server Migration in Finland

Send the equipment list and the current and target locations. Prices are quoted on request and depend on the customer and the size of the job.

Published:

Get a quote