Skip to content
Map of Finland: data centres as dots, the cities with a Reboot Monkey page highlighted: Helsinki

Map: Natural Earth

Smart Hands

Smart Hands in Finland

Smart Hands in Finland is technical work inside a data center that needs diagnostic judgement and configuration knowledge. Reboot Monkey engineers are dispatched to the customer's facility to diagnose faults, configure equipment and handle cabling in the customer's rack.

  • 9

    of our services in Finland

Choose your city

  • Alvar Aalto's red-brick main building of Aalto University in Otaniemi, Espoo, with its wedge-shaped auditorium and an autumn tree

    Photo: Markus Säynevirta · CC BY-SA 4.0 · cropped · source

    Espoo

    • Smart Hands
    • Colocation
    • Data Center Decommissioning
    • Data Center Migration
    • Rack and Stack
    • Remote Hands
    • Server Migration
    Smart Hands Espoo
  • Helsinki Cathedral rising above the pastel buildings of the Market Square waterfront, seen across the South Harbour on a sunny day

    Photo: Ввласенко · CC BY-SA 3.0 · source

    Helsinki

    • Smart Hands
    • Colocation
    • Data Center Decommissioning
    • Data Center Migration
    • Rack and Stack
    • Remote Hands
    • Server Migration
    Smart Hands Helsinki

In depth

Smart Hands: 8 sections, open any to read more.

Smart Hands in Finland: How It Works

Smart hands is the service a customer orders when work inside a rack needs more than an instruction carried out to the letter. Reboot Monkey defines smart hands as technical work that needs diagnostic judgement and configuration knowledge. The engineer is expected to examine the symptom, establish the cause and configure the equipment afterwards, not only to touch it. That diagnostic judgement is the part of the work that remote hands does not include.

Remote hands is the neighbouring service, and the boundary between the two is practical. Remote hands covers physical tasks carried out on the customer's instruction: reboots, cable checks, component swaps and visual checks. The customer already knows what has to be done, and the engineer does it. Smart hands applies when the right action is not known in advance, or when the action involves configuration as well as hardware. The boundary is set by the task, not by the label on the request.

Situations that fit the definition of smart hands include a server that does not return after a reboot, a link that stays down after the cables have been checked, and a replaced component that still has to be configured. Each of them starts with a symptom rather than with a task list, which is what separates it from remote hands.

In Finland the work is carried out by Reboot Monkey engineers who are dispatched to the customer's facility, so the equipment is worked on where it stands. Reboot Monkey is a third-party datacenter services operator, not a hosting company and not a datacenter owner. The facility operator owns and runs the building, including its power, cooling and access policy, and Reboot Monkey engineers work under the operator's site rules.

Smart hands in Finland therefore means the customer's servers and network equipment, and the cabling around them, handled by an engineer who can diagnose and configure. A request names the facility where the equipment stands, because the engineer is dispatched to that building, and it describes the symptom or the change that the engineer is to deal with.

Datacenter Landscape in Finland

Data centres in Finland, ordered by the number of networks present:

  • Digita Helsinki Pasila Broadcasting Tower (Digita Oy), Radiokatu 5, Uutiskatu 5, Televisiokatu 2, 00240 Helsinki: 57 networks; carriers 31173 Services, Bahnhof, Cinia Oy, DNA, EXA Infrastructure and others
  • Equinix HE6 - Helsinki, Sinimäki (Equinix, Inc.), Sinimaentie 12, 02630 Espoo: 26 networks; carriers Arelion, Blix, Cinia Oy, DNA, Elisa Carrier Business and others
  • Telia Helsinki Datacenter (Telia Company), Valimotie 5, 00380 Helsinki: 26 networks; carriers Arelion, Bahnhof, Cinia Oy, DNA, Elisa Carrier Business and others
  • Innopoli (Technopolis), Tekniikantie 12, 02150 Espoo: 16 networks; carriers DNA, Elisa Carrier Business, RETN and euNetworks
  • Tampere Hallituskatu 14 (Lahtiset Yhtymä Oy), Hallituskatu 14, 33200 Tampere: 16 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane
  • LocalNet Lauttasaari (Nebula) (Local Loop Oy), Kiviaidankatu 2H, 00210 Helsinki: 14 networks; carriers Arelion and Elisa Carrier Business
  • Equinix HE7 - Helsinki, Sinimäki (Equinix, Inc.), Sinimäentie 8, 02630 Espoo: 13 networks; carriers Blix, Cinia Oy, DNA, Elisa Carrier Business, Global Secure Layer and others
  • Hetzner Online HEL1 (Helsinki) (Hetzner Online GmbH), Huurrekuja 10, 04360 Tuusula: 13 networks; carriers Cinia Oy, Core-Backbone, Elisa Carrier Business and aurologic GmbH
  • Equinix HE3 - Helsinki, Suvilahti (Equinix, Inc.), Parrukatu 2, 00540 Helsinki: 12 networks; carriers Arelion, Cinia Oy, DNA, Elisa Carrier Business and Global Secure Layer
  • DNA Oulu Torikatu (DNA Oyj), Torikatu 18, 90100 Oulu: 11 networks; carriers Cinia Oy, DNA, Elisa Carrier Business and Portlane

Smart Hands by City

City pages for smart hands in Finland:

  • Helsinki: https://www.rebootmonkey.com/en/finland/helsinki/smart-hands/
  • Espoo: https://www.rebootmonkey.com/en/finland/espoo/smart-hands/

Smart Hands in Finland: What We Deliver

Reboot Monkey provides on-site IT support in Finland data centers through engineers who are dispatched to the customer's facility and work on the equipment in the customer's rack. Within smart hands the work covers diagnosing a fault in servers or network equipment, configuring the equipment, and the cabling in the customer's rack. Smart hands work is therefore ordered for faults, configuration changes and cabling, rather than for routine physical tasks. The scope is set by the task and not by the equipment type: servers and network equipment both fall within it.

For work on fibre links, a fibre inspection scope and cleaning kit are available on request.

Smart hands is one of several services Reboot Monkey delivers in data centres. Read together, their definitions show where it sits. Remote hands asks for execution, rack and stack and server migration ask for installation and movement, decommissioning and ITAD deal with the end of the equipment's life, and hardware monitoring watches the equipment. Smart hands is the service that asks for judgement. A task that needs judgement as well as one of the other services therefore involves smart hands as well as that service. The definitions of the others are as follows:

  • Remote hands: physical tasks carried out on the customer's instruction (reboots, cable checks, component swaps, visual checks). It fits when the customer already knows the action.
  • Rack and stack: installing, mounting and cabling new hardware. It applies when new equipment is being brought into the rack.
  • Server migration: moving equipment between racks, rooms or facilities. It applies when equipment already in service has to change position.
  • Data center decommissioning: removing and disposing of retired hardware. It applies at the end of the equipment's life in the rack.
  • IT asset disposition (ITAD): data wiping, on-site shredding or degaussing, collection and transport, and resale or buyback quoted case by case, all processed by Reboot Monkey staff in a partner's processing facility or on the customer's site.
  • Hardware monitoring: monitoring of the customer's servers and network equipment by the Reboot Monkey NOC. It concerns the same servers and network equipment that smart hands engineers work on.

Why Reboot Monkey for Smart Hands in Finland

Reboot Monkey sells more than engineer time. Its range is rack space, IP transit, leased IP addresses, network and data-centre hardware, together with the services that deliver, install and support them. Rack space and data-centre hardware are what the engineer works on, and the network is what the cabling in the rack connects to. For a customer with equipment in Finland, smart hands is one service within that range, so the work on a rack and the connectivity into it can be arranged with the same provider.

The clearest example is connectivity. Reboot Monkey sells the network for the rack: it orders the cross connects and carrier circuits from the facility operator and the carriers present in the facility, and Reboot Monkey engineers install and patch the cabling in the customer's rack. When a link has to be diagnosed, the party that ordered the circuit and the party that patched the cabling are therefore the same company. Where a request involves a link, the circuit order and the patching are part of the same request.

Continuity is stated per site. A second, briefed Reboot Monkey engineer is named as backup for every customer site. The arrangement applies to every site, not only to large ones: a single rack has a named backup in the same way as a larger deployment, and a customer with equipment at more than one site has a named backup for each.

A smart hands request to Reboot Monkey follows a short sequence. The customer describes the problem or the change. Reboot Monkey quotes the job. Prices are quoted on request and depend on the customer and the size of the job. Because the size of the job is one of the two inputs, a request that describes the work in detail gives the quote more to rest on. An engineer is dispatched to the facility with a named backup in place for the site, and the work is carried out on the equipment in the customer's rack. The engineer's work starts with diagnosis and ends with the equipment configured.

How Reboot Monkey Works

These terms apply in every facility in Finland where Reboot Monkey engineers work.

  • Response: 1-hour, around-the-clock incident response SLA, and a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. The incident response SLA covers incidents and unplanned requests; on-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.
  • Monitoring: 24/7 NOC monitoring across all facilities, covering IPMI, iDRAC, SNMP, temperature, power, network signals.
  • Hardware: vendor-neutral technicians for Dell, HP, Cisco, Juniper and Arista equipment.
  • Independence: independent from facility operators (not Equinix SmartHands, not NTT staff).
  • One agreement: single provider across cities, so a customer in several cities needs only one agreement.
  • Service levels and terms: https://www.rebootmonkey.com/en/solutions/sla
  • Published case study: a major ICT provider engaged Reboot Monkey for three full infrastructure rollouts in Lahore, Karachi and Islamabad, with the hardware installed the same day at every site. Read the case study at https://www.rebootmonkey.com/en/resources/case-study/how-we-completed-3-full-deployments-across-pakistan

Smart Hands

The data centres we work in hold their own certifications, such as ISO/IEC 27001 and ISO 9001. Ask us for the certificate of your site.

Smart Hands in Other Countries

As of 2026, Reboot Monkey's field engineers work in 190 countries and more than 400 locations. A customer whose equipment is not limited to Finland can ask for smart hands in another country as well.

A customer who also has equipment in France can arrange the work through Smart Hands in France, where engineers are dispatched to the customer's facility in the same way as in Finland.

Smart hands is ordered site by site. Whatever the country, a request is about equipment in a specific facility, and the engineer is dispatched to that facility. A customer with equipment in several countries therefore describes the problem or the change once for each site. Where the work involves a link, the circuits are ordered from the facility operator and the carriers present in the facility concerned, so the options for a link follow the facility and not the country.

The limits of the service are set by the definitions. Smart hands does not replace rack and stack when new hardware has to be installed, mounted and cabled, and it does not replace server migration when equipment has to move between racks, rooms or facilities. It is also separate from data center decommissioning, from IT asset disposition and from hardware monitoring by the Reboot Monkey NOC. Each of those is requested as the service it is, and smart hands is added when the task needs diagnostic judgement and configuration knowledge. A task that mixes services is described to Reboot Monkey as it is, and the part that needs diagnosis is the smart hands part.

Because the size of the job is an input to the quote, a request that spans countries is easiest to quote when it lists the facility, the symptom or change, and the services involved for each site.

Because the engineer is dispatched to the customer's facility, the equipment stays in the building where the customer placed it. Smart hands does not change where the equipment stands. Moving it is a separate service.

Frequently Asked Questions

Smart Hands vs. Remote Hands | What's the Difference?

Remote hands covers physical tasks carried out on the customer's instruction, such as reboots, cable checks, component swaps and visual checks. Smart hands is technical work that needs diagnostic judgement and configuration knowledge. With remote hands the customer decides the action and the engineer performs it. With smart hands the engineer works out what is wrong and configures the equipment.

What does smart hands cover in Finland?

In Finland, smart hands covers technical work on the customer's servers and network equipment that needs diagnostic judgement and configuration knowledge, together with the cabling in the customer's rack. A Reboot Monkey engineer is dispatched to the customer's facility, and a fibre inspection scope and cleaning kit are available on request. Physical tasks given as instructions are remote hands, and installation, migration, decommissioning, ITAD and monitoring are separate services.

Do you provide on-site IT support in Finland data centers?

Yes. Reboot Monkey engineers are dispatched to the customer's facility in Finland to carry out the work on site: diagnosis, configuration and cabling in the customer's rack. A request describes the problem or the change and the facility, an engineer is dispatched, and a second, briefed engineer is named as backup for the site.

Do you work in every datacenter in Finland?

Reboot Monkey engineers work in any facility in Finland where the customer has equipment and access, under the operator's own access and safety rules. The customer adds the engineers to the facility's access list before the first visit.

How fast can Reboot Monkey respond in Finland?

Incidents and unplanned requests are handled under a 1-hour, around-the-clock incident response SLA. There is also a 15 minute premium response available where technicians are stationed on-site, as a paid add-on. On-site, dispatch and resolution times, priority tiers, and planned or scheduled work are agreed per site in the service agreement.

How is Reboot Monkey different from the facility operator's own staff?

Facility operators' own technicians work for the building. Reboot Monkey engineers work for the customer: they are independent from facility operators (not Equinix SmartHands, not NTT staff), follow the customer's instructions, and the same team can cover several buildings in the country under one agreement.

How do I get started with smart hands in Finland?

Send the site, the equipment and the task through the contact form. Reboot Monkey replies with a quote and an engineer plan for that facility. Once agreed, the customer adds the engineers to the facility's access list and the smart hands work is scheduled under the operator's rules.

Request Smart Hands in Finland

Describe the fault or the change and the facility where the equipment stands, and Reboot Monkey will quote the job.

Published:

Get a quote